Recommended Posts

No. Unless a showstopper forces a respin (which is extremely unlikely at this point), the June 24 build (RC3) is the Final build. As I've said before in another thread, Mozilla does true candidates, which is why none of the RCs contain "RC" in the version info.

The tree has long been closed, and all checkins since June 24 have been things that are not a part of the build. The nightlies are automatically spun every day, regardless of whether there has been any changes to the code, and they will continue to be automatically generated every day after 3.5 is released (at which point, they will be 3.5.1pre).

Edited by code.kliu.org
As I've said before in another thread, Mozilla does true candidates, which is why none of the RCs contain "RC" in the version info.
Which is interesting in the world of software development. I was ridiculed on another thread for pointing out that Mozilla's release candidates are truly candidates for release, unlike other software, like say Windows, where release candidates have absolutely zero chance of being final.
Which is interesting in the world of software development. I was ridiculed on another thread for pointing out that Mozilla's release candidates are truly candidates for release, unlike other software, like say Windows, where release candidates have absolutely zero chance of being final.

It's a bit like comparing apples and oranges though isn't it? Although I see your point.

Which is interesting in the world of software development. I was ridiculed on another thread for pointing out that Mozilla's release candidates are truly candidates for release, unlike other software, like say Windows, where release candidates have absolutely zero chance of being final.

You're right. With Windows, they generally pre-announce how many release candidates there will be. That, by the very definition of the term 'release candidate', means that they are not release candidates at all. How can RC1 be called a Candidate for Release if you've already announced there will be an RC2 long before RC1 came out. It's stupid really.

Microsoft should continue with the Beta tag until they are at the quality bar where the product could be released. At that point you compile a build and called it RC1. Assuming no show stoppers are found by the public in RC1, you use that very same build and rename it to Final. If bugs are found, you fix them and release a second RC. It's a no-brainer really.

Mozilla seems to do it this way which is a welcome change from Microsoft's backwards way of doing it.

Thanks, but I'll wait for the final version. :)

Which, from the looks of it, will almost certainly be bit-for-bit identical to RC3. ;)

For Mozilla, the process can vary. As people would recall, the Firefox 1.0 RCs were really glorified betas and were not true candidates. The current project drivers very much like the idea of a true RC (in part because it makes it easier for QA to sign off on things: if you spin a new build after an RC, you need to test that build anyway to make sure something weird didn't happen during build or packaging, etc.).

As for Microsoft, they have intentionally "grade-inflated", and they have a very good reason to do so. Raymond Chen wrote an article explaining this (sorry, don't have the link handy) that basically boiled down to this: Microsoft had a problem where people didn't pay attention to the betas, and there was one incident, back when Microsoft's RCs were true candidates that they got an important piece of feedback only after the RC came out, at which point it was too late in the process to make those sorts of changes without incurring a lot of extra cost. So they had to grade-inflate, and what used to be late betas are now RCs, and what used to be RCs are now escrow builds. The idea is that more people are more willing to test and give feedback if it says "RC" than if it says "beta". Though I think that with the current overuse of the "beta" label (e.g., Google's notorious perpetual betas), the need for this grade inflation has decreased somewhat in recent years.

You're right. With Windows, they generally pre-announce how many release candidates there will be. That, by the very definition of the term 'release candidate', means that they are not release candidates at all. How can RC1 be called a Candidate for Release if you've already announced there will be an RC2 long before RC1 came out. It's stupid really.

Microsoft should continue with the Beta tag until they are at the quality bar where the product could be released. At that point you compile a build and called it RC1. Assuming no show stoppers are found by the public in RC1, you use that very same build and rename it to Final. If bugs are found, you fix them and release a second RC. It's a no-brainer really.

Mozilla seems to do it this way which is a welcome change from Microsoft's backwards way of doing it.

I agree. I never understood Microsoft's way of doing this. It really doesn't make any sense at all.

Perhaps. It's only a day away, anyway. I think I can hold out with version 3.0.11 until the version 3.5 is released. :p

Yeah, I really can't wait. I still think that the Tab Previews they chose would have been better served if they used Showcase Tab as a base instead of the add in they chose, but that's my only gripe, and is admittedly miner. Showcase though is an AMAZING add in though.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This Dell 27 inch 4K 120Hz IPS monitor is really cheap after a very long time by Sayan Sen Recently we covered a really good deal on an AMD RX 9070 three-fan model that's available at slightly above its MSRP. If you are looking for a GPU for 1440p gaming that's around the performance of the Nvidia RTX 5070 you should most definitely check it out. Let's say that you are looking for a monitor to pair that up with too. The Samsung 49" G9 curved QD-OLED superultrawide is a good option that can provide an immersive experience. However despite being a very good deal currently (at $855), it may seem unaffordable to you, or you may simply not want to spend as much on a monitor. In that case Dell's S2725QS can be a very good option as it's on sale at the moment for its lowest price in over six months (purchase link under the specs table down below). The big highlight of the Dell S2725QS is its 27-inch IPS panel with a 3840 x 2160 (4K UHD) resolution, offering a high pixel density that can make text appear sharper while also providing plenty of screen space for productivity and media consumption. The display supports a refresh rate of up to 120Hz through both HDMI and DisplayPort, making it suitable not only for everyday desktop use but also for smoother gaming and scrolling. AMD FreeSync Premium support is included as well, helping reduce screen tearing during gaming sessions. The screen has fairly good brightness and color accuracy so you can use it for general work purpose, though photo/video editing is probably not going to be the best match for this. The technical specs of the Dell S2725QS are given in the table below: Specification Value Viewable Screen Size 27 in (68.58 cm) Screen Mode 4K UHD Maximum Resolution 3840 × 2160 Maximum Preset Resolution 3840 × 2160 @ 120 Hz Standard Refresh Rate 120 Hz Panel Technology In-plane Switching (IPS) Backlight Technology LED Edgelight System Pixel Density 163 PPI Response Time 8 ms GTG, 5 ms GTG, 4 ms GTG Horizontal Viewing Angle 178° Vertical Viewing Angle 178° Brightness 350 cd/m² (nits) Native Contrast Ratio 1500:1 Color Support 1.07 Billion Colors Color Gamut 99% sRGB (CIE 1931) Adaptive Sync AMD FreeSync Premium HDCP Support Yes Mount Type Panel Mount VESA Mount 100 × 100 mm Maximum Height Adjustment 13 cm Tilt -5° to 21° Swivel -30° to 30° Pivot ±90° Stand Adjustments Tilt, Swivel, Height, Pivot Glass Hardness 3H Horizontal Frequency 27–270 kHz (DisplayPort 1.4 / HDMI 2.1) Vertical Frequency 48–120 Hz (DisplayPort 1.4 / HDMI 2.1) Video Inputs 2 × HDMI 2.1 (HDCP 1.4 & 2.3), 1 × DisplayPort 1.4 (HDCP 1.4 & 2.3) Operating Temperature 0°C to 40°C Storage Temperature -20°C to 60°C Operating Humidity 10%–80% (Non-condensing) Storage Humidity 5%–95% (Non-condensing) Get it at the link below: Dell S2725QS 27-inch 4K 120Hz IPS monitor: $218.49 (Sold and Shipped by Amazon US) (Was: $280) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases
    • Looks almost like what our office provides us, excluding the leg rest for obvious reasons 😴
    • Forget the iPhone. What about Android? Most Samsung Galaxy phones sold in the USA are manufactured in Vietnam. Asian countries have the infrastructure that the USA doesn't have. This is why most electronics are not made in the USA
    • The RAM would still probably be more expensive than what they were paying last year.
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      231
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      82
    5. 5
      macoman
      64
  • Tell a friend

    Love Neowin? Tell a friend!