Recommended Posts

Hi Everyone!

I have 2MB/Sec Broadband/ADSL

I have 3 Computers:

1) Computer 1 - PC - Runs on Windows XP Pro SP2

2) Computer 2 - PC - Runs on Windows XP Pro SP2

3) Computer 3 - Laptop - Runs on Windows XP Pro SP2

I want to enable all three computers to connect to the internet at the same time.

I'm going to buy this router: *****Clickety*****

I take it the first computer plugs straight into the router? So nothing extra needed?

For the second computer to connect i'm going to get this: *****Clickety*****

For the laptop to connect i'm going to get this: *****Clickety*****

My question is, how will all this work? Will the first computer (The one plugged straight into the router) need to be on, and sharing its connection for the others to connect?

Is is possible for both computers to be off, and the laptop be able to connect?

How does a router work in practice? Will the laptop just be able to be turned on, type in the username and password, and connect, without the need for the other 2 computers to be on?

Thanks in advance!

John

Link to comment
https://www.neowin.net/forum/topic/442894-router-help/
Share on other sites

Well,

A router needs to have modem to connect to the internet.

An ethernet modem.

Plug that one in the router, configure and your router has internet access.

(EDIT: use the WAN port)

Configuration can be done from a computer which is connected to the router using a wire.

(EDIT: on a LAN port)

Set up the internet connection, configure the DHCP server and configure the wireless (speed, channel, ssid and key)

Then you go to the other, wireless computers set it to connect to your ssid with the correct key.

Then they are able to connect to the network.

Set all computers to get an IP and the DNS from the router, and eveyone will be happily surfing the net.

On how to configure the router, I suggest you download the manual (maybe even before buying it) and take a quick read.

To have internet, the modem and the router have to be on (and ofc the computer on which you want to work :p)

No more need for the username and password of your internet connection after you've configured the router on any computer.

Edited by bsquirle
Link to comment
https://www.neowin.net/forum/topic/442894-router-help/#findComment-587311677
Share on other sites

Well,

A router needs to have modem to connect to the internet.

An ethernet modem.

Plug that one in the router, configure and your router has internet access.

Configuration can be done from a computer which is connected to the router using a wire.

Set up the internet connection, configure the DHCP server and configure the wireless (speed, channel, ssid and key)

Then you go to the other, wireless computers set it to connect to your ssid with the correct key.

Then they are able to connect to the network.

Set all computers to get an IP and the DNS from the router, and eveyone will be happily surfing the net.

On how to configure the router, I suggest you download the manual (maybe even before buying it) and take a quick read.

To have internet, the modem and the router have to be on (and ofc the computer on which you want to work :p )

No more need for the username and password of your internet connection after you've configured the router on any computer.

Thanks for the reply! :yes:

So the router i've selected doesnt have a built in ethernet modem?

And the ethernet modem and router is kind of a mini computer then? Once i've told it what to do, it connects and then stays online 24 hrs a day 7 days a week until a computer tries to use the signal?

Thanks very much again! :D *thumbs up*

John

Link to comment
https://www.neowin.net/forum/topic/442894-router-help/#findComment-587311706
Share on other sites

By ehternet modem he means your DSL modem. It must be a ethernet not USB.

Also, you get what you pay for with belkin. I highly suggest you go with linksys. Otherwise it looks like you got it right.

And yes, all the computers can be off and your laptop will still connect.

Thanks for your help Sub! :yes:

This is the current DSL modem: *****Clickity*****

Will that work with the router?

Also, does belkin suck then? :blink:

John

Link to comment
https://www.neowin.net/forum/topic/442894-router-help/#findComment-587311796
Share on other sites

By ehternet modem he means your DSL modem. It must be a ethernet not USB.

Also, you get what you pay for with belkin. I highly suggest you go with linksys. Otherwise it looks like you got it right.

And yes, all the computers can be off and your laptop will still connect.

You should go with Linksys / DLink routers, they go for cheap but they're pretty good. Linksys has problems with BitTorrent but that can be fixed.

The router is like a computer that keeps your connection so when you turn your computer on, it will automatically be connected (assuming the NIC supports DHCP and that it tries to get an address from the DHCP server/router when booting). It should work out of the box without too much configuration.

It's safe to turn off all your computers and you will keep the connection so it's like a semi static IP :) Look at the attachment, this is how you should plug everything.

LAN = Local Area Network (your three computers + router)

WAN = Wide Area Network (the internet, your modem)

post-55871-1142458251.gif

Link to comment
https://www.neowin.net/forum/topic/442894-router-help/#findComment-587311814
Share on other sites

You should go with Linksys / DLink routers, they go for cheap but they're pretty good. Linksys has problems with BitTorrent but that can be fixed.

The router is like a computer that keeps your connection so when you turn your computer on, it will automatically be connected (assuming the NIC supports DHCP and that it tries to get an address from the DHCP server/router when booting). It should work out of the box without too much configuration.

It's safe to turn off all your computers and you will keep the connection so it's like a semi static IP :) Look at the attachment, this is how you should plug everything.

LAN = Local Area Network (your three computers + router)

WAN = Wide Area Network (the internet, your modem)

WOW, thanks for all the help guys! A big thumbs up to you all! :yes:

Looking at *****THIS*****

It seems that I dont need a seperate modem?

All the best to you all! And thanks again!

John

Link to comment
https://www.neowin.net/forum/topic/442894-router-help/#findComment-587311840
Share on other sites

Thanks for your help Sub! :yes:

This is the current DSL modem: *****Clickity*****

Will that work with the router?

Also, does belkin suck then? :blink:

John

Belkin does not suck. I have used several Belkin routers over the years. On my network, I currently have a Belkin 802.11g and Belkin 802.11b that I bought about 2-3 years ago. They both have been very good, and the signal strength is good, too.

Before I had the 2x wireless routers, I had a Belkin 4-port wired router. It worked great, too...I've had that one on the network for about 4-5 years. I just disconnected it last week whenever I upgraded to a new 16-port switch.

So, I'd say that pre-N modem/router combo that you have picked out is a great choice. I'm sure it's a bit pricey as I remember how much just the router cost when it first came out last year. There are cheaper solutions if you don't want the speediness of the pre-N.

However, I would recommend that you just get the pre-N router (not modem/router combo) if BT will exchange the modem that you currently have for free. The reason I say this is because if there is ever any problem with the modem, you'll be able to exchange it for free. They might not even support modems that you bought from some other place. It'd be cheaper to just get the pre-N router, too.

Link to comment
https://www.neowin.net/forum/topic/442894-router-help/#findComment-587311894
Share on other sites

Frist off, your from the uk. Most of what these fine people have posted, althought correct, is rubbish. You can pick up a Modem/Router for around ?30 quid! try www.aria.co.uk. i often use the safecom models they have for basic router functions and no complaints. If you want to go Wireless then i would go with Linksys. A decent Linksys wireless router/modem will set you back around ?65.

Hope that helps

edit: Heres a network diagram for what your looking for. Its rubbish but was the best i could find short of getting out visi;);)

broadband_router_1.png

Edited by simpleyred
Link to comment
https://www.neowin.net/forum/topic/442894-router-help/#findComment-587312140
Share on other sites

Frist off, your from the uk. Most of what these fine people have posted, althought correct, is rubbish. You can pick up a Modem/Router for around ?30 quid! try www.aria.co.uk. i often use the safecom models they have for basic router functions and no complaints. If you want to go Wireless then i would go with Linksys. A decent Linksys wireless router/modem will set you back around ?65.

Hope that helps

edit: Heres a network diagram for what your looking for. Its rubbish but was the best i could find short of getting out visi;);)

broadband_router_1.png

Thank you for saying what I say is rubbish:rofl:l: j/k

He's right, but where's the modem in there? 65 pounds for a router? That's a lot... $131CDN to be exact... and the WRT54G costs $65 her:p:p 32 pounds for you;);)

Link to comment
https://www.neowin.net/forum/topic/442894-router-help/#findComment-587312786
Share on other sites

Most routers here include DSL modems as the majority of modems given out via ISP's are usb. The Prices i quoted are MODEM/ROUTERS meaning they are AIO solutions

Depends where you live. Personally I don't know of any ISP that uses USB modems. I would never use a USB modem myself, simply because ethernet is much faster and much more reliable. Here's a dirty comparison http://compnetworking.about.com/od/broadba...eminterface.htm

Besides, I don't live in the UK

Edited by AresXP
Link to comment
https://www.neowin.net/forum/topic/442894-router-help/#findComment-587315868
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • NASA: This asteroid may not kill us but it probably won't be far off either by Sayan Sen Image by Zelch Csaba via Pexels New observations by NASA's James Webb Space Telescope have eliminated the last remaining impact threat posed by asteroid 2024 YR4, ruling out the possibility that the near-Earth object could strike the Moon in December 2032. NASA said observations collected by Webb on February 18 and 26, 2026, enabled scientists to refine the asteroid's orbit enough to "rule out a chance of lunar impact on Dec. 22, 2032." Instead, asteroid 2024 YR4 is now expected to pass the Moon at a distance of about 13,200 miles (21,200 km). The agency stressed that the update "reflects improved precision in our understanding of where the asteroid is expected to be in 2032 rather than a shift in its orbital path." The announcement closes a remarkable chapter in planetary defence that began in late 2024, when the approximately 60-metre-wide asteroid briefly became the most closely watched near-Earth object in the world. Discovered on December 27, 2024, by the ATLAS telescope in Chile, 2024 YR4 initially appeared to have a small chance of colliding with Earth on December 22, 2032. As astronomers gathered more observations, the impact probability briefly climbed to around 3%—the highest ever recorded for an asteroid of its size—before steadily falling as its orbit became better understood. By early 2025, international observations had ruled out any significant risk to Earth. However, astronomers were left with another possibility: a roughly 4% chance that the asteroid could instead strike the Moon. "The probability that asteroid 2024 YR4 will strike the Moon on 22 December 2032 is now approximately 4%," the European Space Agency (ESA) had said last year, noting that "there is a 96% chance that the asteroid will not impact the Moon." ESA said such an impact, while unlikely, would have presented an extraordinary scientific opportunity. "It is a very rare event for an asteroid this large to impact the Moon – and it is rarer still that we know about it in advance. The impact would likely be visible from Earth, and so scientists will be very excited by the prospect of observing and analysing it," said Richard Moissl, Head of ESA's Planetary Defence Office. "It would certainly leave a new crater on the surface. However, we wouldn't be able to accurately predict in advance how much material would be thrown into space, or whether any would reach Earth," he added. The asteroid also exposed an important blind spot in planetary defence. Because 2024 YR4 approached Earth from the direction of the Sun, it remained hidden from ground-based telescopes until after its closest approach. "We looked into how Neomir would have performed in this situation, and the simulations surprised even us," Moissl said. "Neomir would have detected asteroid 2024 YR4 about a month earlier than ground-based telescopes did. This would have given astronomers more time to study the asteroid's trajectory and allowed them to much sooner rule out any chance of Earth impact in 2032." He added, "As an infrared telescope, like Webb, Neomir would have also immediately given us a much better estimate for the asteroid's size, which is very important for assessing the significance of the hazard." The latest NASA observations underscore the value of space-based infrared telescopes in tracking faint asteroids. According to NASA, Webb made "among the faintest ever observations of an asteroid," extending the object's observational record by nearly eight months at a time when it had become too faint for other telescopes. That additional data allowed scientists to eliminate the remaining uncertainty surrounding its 2032 flyby. Although asteroid 2024 YR4 is now confirmed to pose no threat to either Earth or the Moon, scientists say its discovery remains one of the most significant real-world tests of the international planetary defence system, demonstrating how continued observations can rapidly transform an object once considered hazardous into one whose future path is known with high confidence. Source: NASA, ESA This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • Yup. Google is just scraping the entire internet for their own ad profits without sharing revenue with the sources. It's obviously stealing, but since these sites depend upon Google's search scraps to survive... As for me, I just stopped using Google for anything except Reddit searches. If Reddit's own search wasn't complete crapola, I'd never use Google search again.
    • I had a feeling this was coming. Picked up my first Mac ever last Saturday. Glad I did.
    • In a major surprise there is actually some good deals for the first time in years. At least for me.
  • Recent Achievements

    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
    • Apprentice
      daryld went up a rank
      Apprentice
    • Contributor
      Carltonbar went up a rank
      Contributor
    • One Month Later
      The_Focal_Point earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      419
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      130
    4. 4
      Xenon
      69
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!