Recommended Posts

So i have been looking around for a descent dreamscene video for my new 24" 1920x1200 setup and ran across the crysis dreamscene waterfall over at wincustomize Link. That video is pretty awesome in its own right but it was only recorded at 1280x800. im looking for a version that is 1080p wmv to use as a dreamscene. now what i do know is that it would take a gaming rig made od $$$ to make a video like this but i do know that there is hardware out there that can pull this off. If someone knows of a link to a 1080p version or a 1920x1200 version or if someone could make a video like this that would be awesome. Please post if you can help out!

Link to comment
https://www.neowin.net/forum/topic/627800-crysis-1080p-waterfall-video/
Share on other sites

Aparently the guy who made that video says:

All recording programs suck, I used the built in recording console commands, so even though the game rendered at 4 FPS realtime, I got a 30 FPS video.

capture_frames 1

sys_physics_CPU 0

fixed_time_step 0.033333

It sounds like you could make your own video at that resolution.

So i have been looking around for a descent dreamscene video for my new 24" 1920x1200 setup and ran across the crysis dreamscene waterfall over at wincustomize Link. That video is pretty awesome in its own right but it was only recorded at 1280x800. im looking for a version that is 1080p wmv to use as a dreamscene. now what i do know is that it would take a gaming rig made od $$$ to make a video like this but i do know that there is hardware out there that can pull this off. If someone knows of a link to a 1080p version or a 1920x1200 version or if someone could make a video like this that would be awesome. Please post if you can help out!

i was reading somewheres about being able to render videos in sandbox using frame by frame which sounds like it would be more feasable because of the computational power it would take to encode a 1080p plus running crysis at the resolution is a feat in itself. The only consumer rig out there that could even come close to doing it in realtime do it that i imagine would be a skulltraill rig, dual xenons or q's with dual nvidia 9800x2's. even then it might be iffy. we all know that crytek and ea have the hardware to accomplish a feat like this but of course they would never honor a request like that. if anyone could shed some light on the rendering in sanbox that would be awesome

here Digg they talk about how these high res images are rendered one frame at a time and have achieved a ridicously high rez. so say we wanted to make a 30second video. for video to look good we would need it at 30 fps video. so 30x30 is 900 frames if my math is correct. so if we rendered the scene in sandbox frame by frame and output those to images. then combine the images into video and then envode that in the format shouldnt that work? or is my logic all fooked up

high rez render examples here Link

Edited by Crysis Addict
Skulltrail? Overkill.

The only thing holding the cheapest c2d from doing this is a good gpu. Graphics is where Crysis excels. No game requires more 2 cores to be maxed out at even the relatively small 1080p res.

yea but were talking about real time encoding of hd video also...add this to playing crysis at the same time and u need some serious hardware dont you think

I'd imagine the built in record command would make it less so. And I still think a C2D can do it, also given the fact, that it'll record properly, not necessarily play properly. Which is not a big setback.

from the digg article though the guys says that he couldnt get descent framerates from the built in capture and we all know hows fraps kills framerates. thats why i think the sandbox frame render would be a better solution.

VirtualDub is nice, It will load normal images or videos, and can load .wav files as audio tracks (and export using lots of different codecs and such)

I've been exporting my stuff as DivX with MP3 audio, But I want to move over to H.264 and AAC (I've already got all the stuff to do that, I just haven't bothered doing it yet)

VirtualDub is nice, It will load normal images or videos, and can load .wav files as audio tracks (and export using lots of different codecs and such)

I've been exporting my stuff as DivX with MP3 audio, But I want to move over to H.264 and AAC (I've already got all the stuff to do that, I just haven't bothered doing it yet)

so if im gonna be dealing with 1080p stuff here what which would you recommend. im not going to be doing audio so that wont be a issue. and which compression method (divx hd, or h.264 is gonna give me the best compression to quality ratio??

another ? i am wondering is which video format can say a 8800gt decode on the gpu, instead of the cpu, using the purevideo tech

thanks,

loop

Edited by Crysis Addict

From the looks of it, It will decode both formats on hardware (Would make sense since i see barely any CPU usage on 720p video, regardless of the codec)

Both formats are MPEG4, DivX being a "simpler" profile and H.264 being a more advanced profile, both provide really good quality, but H.264 can provide better quality at a similar bitrate as DivX, with a increase in decoding "costs" (time spent decoding each frame). Input source also matters, the higher quality of the source, the larger the file size will be (hence why you can fit a MPEG2 DVD onto a 700MB CD using DivX, because it's re-compressing a compressed source)

So if Crysis is outputting uncompressed frames (i assume it would, an older engine like Source will output TGA images of each frame), and you're keeping it at full res (1080p) and you have the hardware to decode it (so CPU usage doesn't metter), Then i'd go with H.264, best quality/space/speed

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
    • One of the strangest galaxies in our Universe could help answer some long overdue questions by Sayan Sen Image by Pixabay via Pexels | Not representative An international team of astronomers led by the Department of Astronomy at Tsinghua University has discovered an unusually metal-poor galaxy that may contain signs of first-generation star formation. The galaxy, named Metal-Pristine Galaxy COSMOS Redshift 3 (MPG-CR3), or CR3, was identified using observations from the James Webb Space Telescope (JWST), the Very Large Telescope (VLT), and the Subaru Telescope. The findings, published in The Astrophysical Journal Letters, describe CR3 as the most metal-poor galaxy known from the period known as "cosmic noon," around 11.5 billion years ago. Cosmic noon refers to a period when the universe was producing stars at its highest rate and galaxies were growing rapidly. In astronomy, "metals" refers to all elements heavier than helium, including oxygen, carbon, and iron. Because CR3 contains so few of these heavier elements, researchers say it closely resembles what scientists expect the earliest galaxies in the universe may have looked like. The discovery is significant because it could offer clues about Population III (Pop III) stars, the first generation of stars thought to have formed after the Big Bang. These stars are believed to have formed from gas made almost entirely of hydrogen and helium, before heavier elements were created inside stars and spread across the universe through supernova explosions. Hence this is why CR3 has been referred to as a "living fossil." Scientists have long believed that Population III stars existed only in the very early universe. As more generations of stars formed and died, they enriched surrounding gas with heavier elements, making the conditions needed for metal-free star formation increasingly rare. Because of this, researchers expected the formation of such stars to have largely ended after the epoch of reionization, a period when radiation from the first stars and galaxies transformed the neutral hydrogen filling the universe and made it largely transparent to ultraviolet light. CR3 appears to challenge that idea. The galaxy was observed at a redshift of z = 3.193 ± 0.016. Redshift measures how much light from a distant object has been stretched as the universe expands and helps astronomers determine how far back in time they are looking. In this case, the redshift corresponds to roughly 11.5 billion years ago during cosmic noon. Although the universe was already several billion years old by that point, CR3 shows characteristics more commonly associated with much earlier galaxies. Observations revealed exceptionally strong emissions from hydrogen and helium, including Lyα, Hα, and He I λ10830. Lyα, or Lyman-alpha emission, is a specific wavelength of light produced by hydrogen and is widely used to study distant galaxies. Hα emission is another hydrogen signature commonly used to trace active star formation, while He I λ10830 is produced by helium and can indicate the presence of very hot, young stars. The measured equivalent widths of EW₀(Lyα) = 822 ± 101 Å and EW₀(Hα) = 2814 ± 327 Å are among the highest ever observed in star-forming galaxies. Equivalent width is a measure of the strength of an emission line relative to the surrounding light, and such large values are typically associated with intense and very recent star formation. At the same time, researchers found no statistically significant detections of metal emission lines, including [O III] λλ4959, 5007 and C IV λλ1548, 1550. Emission lines act as chemical fingerprints that reveal which elements are present in a galaxy. Oxygen and carbon lines are commonly seen in galaxies that have already undergone significant chemical enrichment. Their absence in CR3 suggests an unusually pristine environment. Using abundance calibration methods developed with JWST observations, the team placed a 2σ upper limit on the galaxy's gas-phase metallicity of 12+log(O/H)<6.52, corresponding to less than 0.7% of the Sun's metallicity (Z < 7 × 10⁻³ Z⊙). Gas-phase metallicity measures the abundance of heavy elements in a galaxy's gas. A 2σ upper limit indicates that the true value is very unlikely to be higher than the quoted threshold. Even when accounting for uncertainties in the calibration methods, the most conservative limit remains 12+log(O/H)<6.95, making CR3 the most metal-poor galaxy identified at cosmic noon. The galaxy also appears to contain very little dust. Researchers measured a Lyα/Hα flux ratio of 13.9 ± 2.5, a result that suggests negligible dust attenuation, meaning very little of the galaxy's light is being absorbed or scattered by cosmic dust. Because dust is usually produced by earlier generations of stars, this finding further supports the idea that CR3 has experienced very little chemical enrichment. Further analysis using spectral energy distribution modelling, a technique that compares observed light with theoretical models, suggests that CR3 contains an extremely young stellar population only around 2 million years old. The modelling, which used Population III stellar templates, also indicates the galaxy has a stellar mass of approximately 6.1 × 10⁵ M⊙. The symbol M⊙ represents one solar mass, or the mass of the Sun. One of the key questions raised by the discovery is how such a chemically primitive galaxy could exist in a universe that had already spent billions of years producing heavier elements. To investigate this, the researchers examined CR3's surroundings. Their analysis suggests the galaxy may lie in a slightly underdense environment, with a density contrast of roughly δ ≈ −0.12. An underdense region contains less matter and fewer galaxies than average. The team suggests that this relative isolation may have helped preserve pockets of pristine gas. Metal-rich material expelled from nearby galaxies may never have reached CR3, while the lower rate of galaxy mergers and interactions could have slowed the mixing of enriched gas into the system. If future observations confirm these findings, CR3 could provide some of the strongest evidence yet that first-generation star formation continued well after the epoch of reionization. Such a result would challenge the conventional view that pristine star formation ended by z ≳ 6 and suggest that small pockets of metal-free gas survived much longer than previously thought. Researchers stress that more observations will be needed to determine the galaxy's true nature. Future spectroscopic studies with higher resolution and better signal quality could help confirm whether CR3 is genuinely hosting Population III star formation. The discovery is also expected to encourage searches for other similar galaxies, which could help astronomers better understand how the first stars formed and how galaxies evolved in the early universe. Source: Tsinghua University, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • "I think in the immediate absence of a partner to apply relief" In the words of Sterling Archer... "Phrasing!"
    • For me, the fundamental problems with these "smartglasses" is that they really don't work well for people with significant prescriptions and massively up the price if you use attached lenses if they have displays, and if they don't, then they're not actually "smart" anything, rather just connecting to your phone and relaying voice to an AI. In a few cases like this, they throw in small cameras to feed video to the AI. All around, these feel like both a solution looking for a problem, and the problems it tries to solve seem more easily solved by different approaches and designs. Oddly, if the rumours are true, Apple may actually have invented something for once and it kind of does this right: put cameras in ear buds and manage the interface to AI exactly as most of us do: tapping on an ear bud and saying "Hey Google" or "Hey Siri." That makes them compatible with almost everyone, can double up as a hearing assist device, an impaired vision assist device, a "smart" device... and answer your phone and play music. That just seems like a better solution all around.
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      454
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      84
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!