Looking for a good server distro


Recommended Posts

I'm getting ready to update my server (uses: vbulletin, mysql, php, perl). I have Redhat on it now but since they got into Fedora, I don't think I want to use that in my server.... any suggestions? I'm looking for something easy to maintain but strong in security. Thanks.

Link to comment
https://www.neowin.net/forum/topic/269495-looking-for-a-good-server-distro/
Share on other sites

I'm no Linux guru but Mandrake and Suse have always been great to me. They've got nice administration tools built in and they run rock solid.

That's just me though. I use them as a compliment to many networks. I like Mandrake for schools because it looks nice and friendly for others to use. I use Squid Proxy most times on Mandrake. Nice app!

I still want to try out Gentoo but haven't had time yet.

Either of the following would be good to use imo.

1) FreeBSD

2) Debian

3) SuSE

I never really messed around with BSD but from user-feedback and articles that I've been reading, it's obvious that BSD is the most secure thing to run on a server.

Debian is great cause of Apt. It has packages in the stable and testing mirrors that are 99.9% sure to work and you'll have strictly what you need. You install the base system and install anything afterwards with apt-get.

SuSE, well, it has a pretty installation that people enjoy looking at and it works. It's easy to setup and YaST isn't bad at all. Just make sure that the rpm's that you will be using will install on SuSE (sometimes they can be distro-specific if not mistaken).

But as far as linux distributions go, you could pretty much use almost anything as long as the package managment tool that it provides is reliable (don't need one but it sure makes life easy for admins). Apt and Portage are the two systems that I'd say are reliable as far as linux goes.

Well I used to be a UNIX guy, then a couple of years ago I was a BSD guy and now I'm a Linux guy. I've ran all kinds of servers. FreeBSD is a really fine OS for a server. There are things that are different in BSD than Linux, but its easy to distinguish. Oh yeah and I used to pretty much have to compile everything on my BSD server, but that was a couple of years ago.

Thanks all for the advise. I'm not really not a fan of compiling my own packages but I may be willing to do that if there is no other choice. It would really be nice for some of these packages to make it easier to install and upgrade. I think it would really bring Linux more into the mainstream (desktop). It would also be nice to get a distro that would keep up to date with tech instead of having to upgrade all the time to the newest version of things (or at least semi new).

It would really be nice for some of these packages to make it easier to install and upgrade. I think it would really bring Linux more into the mainstream (desktop). It would also be nice to get a distro that would keep up to date with tech instead of having to upgrade all the time to the newest version of things (or at least semi new).

585273046[/snapback]

:blink:

Odd, but I think Linux does an excellent job of what you describe. Especially when you compare it to the 'other' significant OS that is in the market. ;)

Thanks all for the advise. I'm not really not a fan of compiling my own packages but I may be willing to do that if there is no other choice. It would really be nice for some of these packages to make it easier to install and upgrade. I think it would really bring Linux more into the mainstream (desktop). It would also be nice to get a distro that would keep up to date with tech instead of having to upgrade all the time to the newest version of things (or at least semi new).

585273046[/snapback]

Most distros come with package managers that already make it easier to install. One of the most popular is APT-get for Debian.

You type apt-get install <program> and it searches the APT repositories online, finds it, downloads and then installs it for you. That's it. Type apt-get upgrade and it will search through your apps and update them (I believe it uses the RPM database on all distros that use apt-get/apt-get port. Type apt-get dist-upgrade and it will upgrade everything else including your distribution's core files.

Some other distros have Apt-get as well with their own APT repositories for that distribution, such as Fedora Core 2 and 3.

Windows isn't even that easy.

You have YUM as well, or even just normal RPM installation and a bunch of other package managers.

Any linux distro will most likely fit your needs for a server. It doesn't make much difference. Its all about freedom and choice.

I'm surprised nobody mentioned: White Box. Its just RedHat Enterprise Linux recompiled without RedHat's trademarks.

I'm surprised nobody mentioned: White Box. Its just RedHat Enterprise Linux recompiled without RedHat's trademarks.

585273277[/snapback]

But, doesn't that make it not Open Source? :rofl:

(sorry, inside joke...) ;)

Back on-topic: That is probably the best solution for handling enterprise types of apps. I think almost any flavor of Linux will work well, or the BSD option may be a worthy platform to build from, too! :yes:

But, doesn't that make it not Open Source? :rofl:

(sorry, inside joke...)  ;)

Back on-topic:  That is probably the best solution for handling enterprise types of apps.  I think almost any flavor of Linux will work well, or the BSD option may be a worthy platform to build from, too! :yes:

585273398[/snapback]

hahahaha. Yeah it doesn't matter that the source is open, because it isn't open source!

-

BSD is always a good option, especially being arguably the most secure OS on the planet.

Thanks.. I have never been able to install any BSD or Debian on my test server both had hardware incompatibilities, I believe. Although, I'm sure they would have no issues on the server but I'm not installing any server solution that I can't have on my test server. I never had any issues installing any RedHat product. I'll have to check out Whitebox, Thanks.

Most distros come with package managers that already make it easier to install. One of the most popular is APT-get for Debian.

You type apt-get install <program> and it searches the APT repositories online, finds it, downloads and then installs it for you. That's it. Type apt-get upgrade and it will search through your apps and update them (I believe it uses the RPM database on all distros that use apt-get/apt-get port. Type apt-get dist-upgrade and it will upgrade everything else including your distribution's core files.

Some other distros have Apt-get as well with their own APT repositories for that distribution, such as Fedora Core 2 and 3.

Windows isn't even that easy.

You have YUM as well, or even just normal RPM installation and a bunch of other package managers.

Any linux distro will most likely fit your needs for a server. It doesn't make much difference. Its all about freedom and choice.

I'm surprised nobody mentioned: White Box. Its just RedHat Enterprise Linux recompiled without RedHat's trademarks.

585273277[/snapback]

I'm partial to FreeBSD :-)

The main reason I like it is because it's easy to administer, and it's stable. Ports allows you to compile from source (more versatile than using binaries) while still making updating your software an easy process. The stability means that I rarely have to do anything at all once the server is up and running. Just a few updates here and there and watch the uptime. I guess I'm lazy :p

Arch linux, I'm not convinced. I use it on my desktop and it's not as stable as FreeBSD. Things tend to break too often when updating the OS. It's nice to have a workstation with the latest and greatest, but one wouldn't do the same for a server. And arch tends to be a distro that lives on the bleeding edge. Using arch is kind of like using FreeBSD-CURRENT (you'd want to use FreeBSD-STABLE for your server). I'm not saying that you can't make an arch box stable. It's just that it seems to take more work to achieve that.

Thanks.. I have never been able to install any BSD or Debian on my test server both had hardware incompatibilities, I believe. Although, I'm sure they would have no issues on the server but I'm not installing any server solution that I can't have on my test server. I never had any issues installing any RedHat product. I'll have to check out Whitebox, Thanks.

585273559[/snapback]

Debian "stable" tends to use two year old kernels for those that want something that has been tested under every possible condition. It is very conservative. A bit too conservative for my tastes.

Debian "testing" (i.e. Sarge) uses still a somewhat older kernel but it has far better hardware support than "stable". Personally, I'd consider Debian "testing" to use as a server for most operations.

Debian also has an "unstable" branch that is good for desktop use. I even find that to be rather stable but it's probably too cutting edge for something important.

If you use a debian based distro, I would go with Ubuntu. My company currently uses Ubuntu on most of our servers. The packages in the Ubuntu repository seem better and it is a little bit easier I think. The plus side of Ubuntu is that it has great auto detection of hardware and best of all, it's debian based.

If you use a debian based distro, I would go with Ubuntu.? My company currently uses Ubuntu on most of our servers.? The packages in the Ubuntu repository seem better and it is a little bit easier I think.? The plus side of Ubuntu is that it has great auto detection of hardware and best of all, it's debian based.

585283461[/snapback]

It's also from the unstable branch. Much like Knoppix, Mepis and the other Debian children.

Ubuntu is Debian. You can use whatever repositories you want. They are usually just mirrors of one another anyway. You can configure Debian to look like Ubuntu and you can configure Ubuntu to look like Debian. It's just a matter of apt-get installing a few packages or apt-get removing a few packages.

Edit:

I know this is an old post (it came up on a Google search) but now that Ubuntu uses Hoary you can't necessarily use non-Ubuntu repositories. Earlier versions of Ubuntu (that used xfree86 rather than x.org) weren't as picky.

Edited by fred666
I'm no Linux guru but Mandrake and Suse have always been great to me.  They've got nice administration tools built in and they run rock solid.

That's just me though.  I use them as a compliment to many networks.  I like Mandrake for schools because it looks nice and friendly for others to use.  I use Squid Proxy most times on Mandrake.  Nice app!

I still want to try out Gentoo but haven't had time yet.

585268351[/snapback]

Mandrake is one of the worst OS's for Server use. Its insecure and horrible.

Just my opinion.

However i have to say Redhat enterprise is good for production use, as it has a large support medium.

However, there are other distros such as freebsd and debian which are great for production use.

For a server? I'd go with debian or slackware, or even ditch linux and go with FreeBSD.

585268720[/snapback]

Good choices. I'm using Slackware at the moment. I started not to long ago using the distro, and its pretty easy to configure and to use.

Mandrake is one of the worst OS's for Server use. Its insecure and horrible.

Just my opinion.

However i have to say Redhat enterprise is good for production use, as it has a large support medium.

However, there are other distros such as freebsd and debian which are great for production use.

585300488[/snapback]

Mandrake is geared towards the desktop user and its not really insecure, no more than most distros. I wouldn't personally use Mandrake for a server. Many people use Fedora as a server distro all though its geared towards the desktop just like Mandrake.

Which sense this is a sticky I'll mention Fedora is a more bleeding edge distro than most. And it tries to be. That's good for the desktop market, not for the server market, because the apps aren't as thoroughly tested. I haven't ran into many instability issues though, but I've seen people who have from FC1 - 3.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I just looked on my computer and there are settings and log files for utilities I have never even turned on!
    • O&O ShutUp10 3.1.1104 by Razvan Serea O&O ShutUp10 offers a simple yet effective way to take control of your Windows privacy. It provides access to almost 50 privacy-related tweaks, most of them hidden or not easily accessible to the average computer users. Using a very simple interface, you decide how Windows 10/11 should respect your privacy by deciding which unwanted functions should be deactivated. Using ShutUp10 you can easily disable Windows Defender, turn off telemetry, disable peer-to-peer updates, turn off Wi-Fi Sense, disable automatic Windows updates, turn off and reset Cortana and more. ShutUp10 allows you to create a System Restore point before you apply any changes, so that you can revert your system at any time if you run into problems. O&O ShutUp10 is entirely free and does not have to be installed – it can be simply run directly and immediately on your PC. And it will not install or download retrospectively unwanted or unnecessary software, like so many other programs do these days! O&O ShutUp10 Free and Premium The latest version brings O&O ShutUp10 Premium, expanding the app’s long-standing privacy controls with automatic enforcement of user-defined settings. Instead of manually rechecking options after every Windows update, users can set their preferred privacy configuration once—or apply recommended settings in a single click—and the tool continuously monitors them in the background. If Windows 10 or 11 re-enables disabled features or introduces new data collection paths, Premium restores the chosen settings automatically without user intervention. The free version remains available and fully functional for manual adjustments, offering the same core privacy controls for Windows. However, the Premium tier is aimed at users who want long-term, hands-off protection, adding automatic reapplication after updates, ongoing monitoring, and optional notifications to ensure privacy settings remain consistent over time. O&O ShutUp10 3.1.1104 changelog: Added “Show Differences” button in the overview panel “Don’t show again” option for the restore point prompt Ctrl+F keyboard shortcut for search/filter functionality Detection and linking of system-wide and user-specific setting associations Automatic search while typing PREM: Option to preserve notification counters and timestamps across application restarts PREM: Reset blocked settings button in the Settings dialog PREM: Informational message when no settings are blocked PREM: Update check can also be triggered from the menu PREM: Notification deduplication and activity log summary feature Improved L005 “Disable Windows Location Service”: Version-specific split (up to Windows 11 23H2) and new variant for Windows 11 24H2+ L001 (Disable Location): Added Night Light warning to the description in all languages Search now detects setting IDs even when ID display is disabled and offers to enable it Detection and removal of Copilot/AI desktop apps in RecallTerminator Optimized High DPI support PREM: Reset button is now only enabled when blocked items exist – setting IDs are shown in the confirmation dialog PREM: Updated tray icons with higher-resolution versions PREM: Activity Log timestamps now use localized date and time formats PREM: Tray icon status now uses OK/Warning indicators and localized tooltips PREM: Recall folder detection switched to service-based detection PREM: Copilot uninstallation now provides UI feedback and improved verification Fixed Description text was not displayed correctly for the last item and disappeared when clicking the scrollbar Crash when clicking a search result heading or the […] button PREM: Installation path is now correctly preserved during upgrades PREM: Tray icon was not reliably removed when exiting the application PREM: Main window was not displayed correctly in single-instance mode PREM: Incorrect display of the & symbol in tray icon tooltips on Windows 10 PREM: Fixed notification flooding after sleep/standby PREM: Dashboard was not refreshed after applying recommended settings during onboarding PREM: Progress bar was not reset after deleting Recall folders PREM: Fixed service startup failures PREM: Fixed incorrect drift detection when Automatic Protection was disabled PREM: Notifications now correctly count all deviating settings when protection is enabled PREM: Registration Wizard was shown after sleep/standby despite a valid license Download: O&O ShutUp10 3.1.1104 | 76.4 MB (Freeware) Download: O&O ShutUp10 32-bit | ARM64 View: O&O ShutUp10 Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Fascinating...W h i t e P o w e r is now also asterisks out.  
    • In the past few days I have noticed two odd moderation activities. First, when I posted the term 'White Nationist Christian' it was asterisk's out. When I changed it to **** it was allowed! Second, in the Politics is a ###business thread I was allowed to post that the GOP is a party of p e d ophiles but I was censored  when I posted the GOP are a party of p e d ophile protectors. Wtf Neowin. Please explain.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      547
    2. 2
      +Edouard
      166
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Steven P.
      66
    5. 5
      neufuse
      65
  • Tell a friend

    Love Neowin? Tell a friend!