HD Question/Help


Recommended Posts

Up until now I've been using my 360 with an old crappy portable SD tv set, but the other day I ordered up the VGA HD cables and they arrived this morning.

I don't know if it's because I have the resolution too high or if I'm not used to HD yet and how it displays games (I'm using a 1905FP Dell monitor btw).

I tried out PGR3 with my monitor and it seems like the cars are a bit squashed. I don't know if I need to adjust my settings or am I imagining it and it is displaying properly?

I set the resolution in the dashboard to 1280x1024 at first, but trying to see if it helped I changed it down to 1280x720 and it still looks the same..

Any ideas?

Link to comment
https://www.neowin.net/forum/topic/450566-hd-questionhelp/
Share on other sites

Is your monitor widescreen? The reason they looked squashed is the game is set to widescreen and so it is trying to create a 16:9 aspect ratio on a 4:3 screen. If you try most games they will put black borders in on your 4:3 which stops it looking squashed, for some reason PGR stretches the image.

I hope that helps.

Is your monitor widescreen? The reason they looked squashed is the game is set to widescreen and so it is trying to create a 16:9 aspect ratio on a 4:3 screen. If you try most games they will put black borders in on your 4:3 which stops it looking squashed, for some reason PGR stretches the image.

I hope that helps.

Thanks for your help. I have it sorted now.

In my excitment this morning I just switched the resolution to 720 without looking at the first deimension. I picked 1280 instead of 1024 :p

It'd be better to use 1280x1024 since that's your monitor's native resolution. That's what I use when I have it hooked up to my monitor and I haven't had any problems with games looking squished.

Disclaimer - I haven't tried PGR3, though. ;)

Well switching back to 1280x1024 would take away the black borders and mess up the ratio. Unless anyone knows how to fix it for PGR3? Other games display fine apart from it.

Thanks for all your help guys, I thought I was doing something wrong but I guess all I can do is wait and see if they patch PGR3?

It's quite annoying how games are allowed to over ride the settings you pick.

So in the mean time I should run the native resolution? :)

^ VGA cables in general are capable of far higher resolutions than 1080p... so no it's not the cable that's limiting anything.

The default MS Xbox 360 VGA cable only supports the games up to 720. I realize that normal VGA cables can support the higher resolution but the xbox vga cable cant.

The default MS Xbox 360 VGA cable only supports the games up to 720. I realize that normal VGA cables can support the higher resolution but the xbox vga cable cant.

Are you sure it's the cable? I think there's just no option for 1080i because all computer monitors are progressive scan and 1080p has twice the resolution as 720p (and would require twice the power) while 1080i only uses a little more pixels per second than 720p.

Besides, when it's hooked to my monitor I have it set at 1280x1024 which is already higher than 720p, so while the games might not use that resolution the VGA cable is quite capable of doing so.

Are you sure it's the cable? I think there's just no option for 1080i because all computer monitors are progressive scan and 1080p has twice the resolution as 720p (and would require twice the power) while 1080i only uses a little more pixels per second than 720p.

Besides, when it's hooked to my monitor I have it set at 1280x1024 which is already higher than 720p, so while the games might not use that resolution the VGA cable is quite capable of doing so.

Yep, I'm sure. When I bought my new TV i actually thought it would be a better purchase to get the 360 vga cables instead of using the component cables, after looking at the back of the packaging, turns out the vga supported 720p but not 1080i

Yep, I'm sure. When I bought my new TV i actually thought it would be a better purchase to get the 360 vga cables instead of using the component cables, after looking at the back of the packaging, turns out the vga supported 720p but not 1080i

I assume it doesn't support 1080i because computer monitors are progressive scan and MS probably thought all HDTV owners would just use the component cables. It seems more like the resolution is limited in the software (because of potential performance problems) rather than the VGA cable.

In fact, if someone more knowledgable about cables can help me out, I'm not even sure VGA cables were ever meant to output interlaced signals.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Umm, read my answer again! If you have something to add or contribute, feel free. Otherwise my point was that you apparently dont want faster updates... so you want slower updates by process of elimination. If you have something to contribute, meaningful answers are better.
    • These features described above are good, but far from what developers will like the most. The main feature that developers will care and love the most it's called "Bring Your Own Models". It gives us the ability to connect to LOCAL AI models running on Ollama. The feature it's located on GitHub Copilot tab -> On the model picker where you can select "manage models" instead of paid models and then it will show you the "Bring your own models" window where you can now select Ollama and the endpoint of your local server. So if you have a beefy spec machine you can now use your own model 100% local inside Visual Studio 2026 18.7.0
    • Microsoft Teams is getting a controversial location tracking feature that users may hate by Usama Jawad Image generated with Microsoft Copilot Earlier this year, Microsoft planned to roll out a controversial location tracking feature in Teams, but following customer feedback, it decided to delay its release. The bad news is that the company has decided to launch it later this year, but it's based on roughly the same design that was shared earlier, which means that many users still have good reason to worry. Basically, Microsoft Places and Teams have received workplace check-ins via Wi-Fi. The idea is that if an employee arrives at the office and connects to their enterprise network, their profile status indicator will show them as being present in the office. For example, if you arrive at work, open Teams on your PC, and connect to the "Studio B" company Wi-Fi network, your Teams profile will indicate that you are present in "Studio B", as shown below: Microsoft says that this feature is basically a replacement for physical workplace check-in peripherals, it reduces the need to manually update your status, and it also enables co-workers to know that you're at work so that they can coordinate in-person meetings with you. IT admins can enable this workplace check-in capability at a tenant level, and users have the ability to control whether they want to enable it or not. Of course, all of that sounds great on paper, but naturally, many Teams customers may still have concerns, as they did before. This is because it enables your reporting manager and other members of the organization to track if you are at the office, when you arrive at the office, and where you are right now. This could be problematic for people who work in what they consider to be flexible work environments or hybrid setups, and this kind of location tracking could be considered an invasion of privacy. Microsoft has tried to alleviate some of these concerns by letting users know that they can manually set their location easily, which essentially overrides workplace check-in if they feel uncomfortable with it. However, that doesn't really solve the problem because your organization could enforce a workplace policy that mandates that this feature remains enabled. The Redmond tech giant has also assured users that this capability does not store historical data and is only a real-time indicator of location. Finally, it only generates a signal when you connect to a corporate network, which means that if you are working from home and connect your PC to your personal Wi-Fi, it won't broadcast your location to your employer; you will simply be shown as "Remote". Microsoft has encouraged IT admins to prepare for this change and begin informing users so they know what to expect once it begins rolling out later this year.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      Steven P.
      82
    5. 5
      ATLien_0
      81
  • Tell a friend

    Love Neowin? Tell a friend!