Enable AHCI on Intel chipsets


Recommended Posts

Some of you might know that AHCI enables Native Command Queuing support and Hot Plugging for SATA drives. Unfortunately it can usually be enabled only when installing Windows, by using a floppy drive.

Spported southbridges: ICH6R, ICH6M, ICH7R, ICH7DH, ICH7M

Instructions:

1) Make sure AHCI is not enabled in your BIOS, otherwise this guide is pointless for you.

2) Back up your Windows folder and prepare a boot disk in case this guide fails!

3) Download 79im05ww.exe from http://www-307.ibm.com/pc/support/site.wss...ocid=MIGR-62909

4) Extract the file to C:\DRIVERS\WIN\SATA.

5) If you have the ICH7M southbridge, go to step 8.

5) Open C:\DRIVERS\WIN\SATA\PREPARE\IMSM_PRE.inf in Notepad.

6) Replace any instance of DEV_27C5 with the following, according to your southbridge:

ICH6R - DEV_2652

ICH6M - DEV_2653

ICH7R - DEV_27C1

ICH7DH - DEV_27C1

ICH7M - DEV_27C5

7) Save the file and close Notepad.

8) Click Start, select Run.

9) In the Open field type C:\DRIVERS\WIN\SATA\PREPARE\INSTALL.CMD and click OK.

10) Restart your computer, and enable AHCI on in your BIOS Setup.

11) Start Windows XP or Windows 2000. The Found New Hardware wizard will start automatically.

12) If running Windows XP:

1. Click No, not this time then click Next.

2. Select Install from a list or specific location (Advanced), then click Next.

3. Select Search for the best driver in these locations.

4. Select Include this location in the search: and specify the path, C:\DRIVERS\WIN\SATA, and click Next.

13) If running Windows 2000:

1. Click Next.

2. Select Search for a suitable driver for my device (recommended), then click Next.

3. Select Specify a location, then click Next.

4. Specify the path, C:\DRIVERS\WIN\SATA, and click OK, then click Next.

14) Click Finish.

15) When the System Settings Change window appears, click Yes. The computer restarts.

Link to comment
https://www.neowin.net/forum/topic/457699-enable-ahci-on-intel-chipsets/
Share on other sites

Confused here. I'm running a single SATA 250GB drive as my primary boot disk. (Well, I've partitioned it into two, but it's one physical drive.) Intel ICH7R southbridge.

No RAID for me, as I've only got one drive, but what advantages will I get if I run my drive in AHCI mode rather than in IDE mode? Can this even be done - this IS the drive I'm booting from...

Confused here. I'm running a single SATA 250GB drive as my primary boot disk. (Well, I've partitioned it into two, but it's one physical drive.) Intel ICH7R southbridge.

No RAID for me, as I've only got one drive, but what advantages will I get if I run my drive in AHCI mode rather than in IDE mode? Can this even be done - this IS the drive I'm booting from...

As I said in the first post:

AHCI enables Native Command Queuing support and Hot Plugging for SATA drives

:no: I am not able to set the BIOS in AHCI mode

I use a Asus P5PL2 mobo with Intel ICH7DH southbridge

I can see in BIOS that the SATA controller use IDE mode for my Seagate Barracuda disk

It is a sata2 disk,and my mobo support sata2 up to 300Mb/s,so I would realy like the sata

controllers to work in AHCI mode.

When I enter BIOS,under IDE configuration,there is a line called:Configur SATA As..,but the only option

is: Standard IDE.As a discription to this option it says:"When in AHCI/RAID mode,controller is forced to

Native mode".

Can anybody please tell me how to configur my SATA drive for best preformence?

Is there a way to configur it to AHCI mode?

I hope somebody has time to help me!

  • 2 months later...
lhost' date='May 3 2006, 09:26' post='587471595']

Some of you might know that AHCI enables Native Command Queuing support and Hot Plugging for SATA drives. Unfortunately it can usually be enabled only when installing Windows, by using a floppy drive.

Can't you enable AHCI by just installing Intel's Matrix Storage Manager/Technology?:

http://www.intel.com/support/chipsets/imsm/

http://www.intel.com/support/chipsets/imst/

  • 1 month later...
  • 1 month later...
  • 2 weeks later...

I literally spent a DAY trying to get AHCI to work. I was trying to load WMCE and after pressing F6, loading the drivers, and watching Windows install....my PC would crash and reboot at the Loading Windows screen (the one you see right after post with the animated bar).

I tried everything I could think of (believe me....that is a lot of stuff....I'm 39 and been building PC's since I was 12)

THIS WORKED LIKE A CHAMP!!!!!!!!!!!!!

THANK YOU, THANK YOU, AND THANKS A HECK OF A LOT!!!!!!

:D :) :laugh: :rofl: :woot: :yes:

One note for anyone attempting this procedure. In step 6 the instructions say REPLACE. Notepad has a REPLACE feature. USE IT! It will keep you from making a typo like another poster did.

  • 4 weeks later...
  • 1 month later...
  • 1 month later...

hi to all! i'm Ruben from italy. I have a p5b deluxe and two 250gb sata2. I would like to know where to connect those hd. I know that there are difference between red and black connector. I would like to know also how to set sata on bios and which driver install. i have read of ahci but i don't understand very well what is it. thank you for your help and sorry for my bad english

  • 1 month later...

Here is the solution (it worked fine for me)

With the BIOS on IDE open Regedit and go to:

HKLM\System\CurrentControlSet\Services\msahci\Start

and change whatever you have on DWORD to '0'

Raboot

Reboot again, enter BIOS

Change IDE to AHCI, Save

Let the OS redetect your drives

Reboot

That's it, hope it helps

  • 3 months later...
  • 2 weeks later...
Any news regarding this guide but with the ICH9 chipset?

I have the P35 chipset w/ ICH9 (Gigabyte P35-DS3R)... with an existing Vista installation I did this:

HKLM\System\CurrentControlSet\Services\msahci\Start

and change whatever you have on DWORD to '0' (default value was 4)

like Ropera mentioned, I installed the Intel Matrix Program/Drivers, rebooted went into Bios... changed from RAID/IDE to AHCI save and everything went fine...

  • 2 months later...

I used that method originally on my Asus P5W DH Deluxe for both Windows XP 32 bits and Vista 32 bits but now I have a double problem:

Now I have a Asus P5K Deluxe with ICH9 and I'm with both Windows XP and Vista x64 edition.

So instead of this drivers version on the firts post (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62909), I'll have to get another one right?

I have the P35 chipset w/ ICH9 (Gigabyte P35-DS3R)... with an existing Vista installation I did this:

HKLM\System\CurrentControlSet\Services\msahci\Start

and change whatever you have on DWORD to '0' (default value was 4)

like Ropera mentioned, I installed the Intel Matrix Program/Drivers, rebooted went into Bios... changed from RAID/IDE to AHCI save and everything went fine...

Can you post a print screen of all DWORD keys you have under \Start forlder? Inside mine HKLM\System\CurrentControlSet\Services\ it doesn't even have a \msahci or \msahci\Start forlders, I'm confused :wacko:

Please help me, I'm desperate.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Samsung Galaxy Z Fold 8, Flip 8, Z Fold Wide: Everything you need to know The ONLY thing I need to know is the price, which I know will be way higher than I (and most people) are willing to pay for a phone... so basically nothing here I need to know. PS: Nice job getting that Apple reference to a non-existent and unrevealed product as "competition" in there. Cheque is in the mail.
    • Well I really think the repasting helped if your higher clocks have returned, maybe the next thing to look at is if there is a problem with your case airflow? I guess this because your 3080 has returned to optimal state, but is still staying too warm, which might suggest it was thermal throttling before you repasted, of which the only logical conclusion could be outside factors.
    • Samsung Galaxy Z Fold 8, Flip 8, Z Fold Wide: Everything you need to know by Hamid Ganji Galaxy Z Fold 7 - Image via Samsung The next generation of Samsung foldables is set to be unveiled next month at the second Unpacked event of the year. Samsung’s 2026 foldables are not expected to offer significant upgrades over their predecessors, with the Korean firm instead focusing on design refinements and conventional upgrades such as faster processors and better cameras. However, Samsung is reportedly planning to unveil an all-new passport-style foldable this year to rival Apple’s first foldable iPhone, which is expected to debut this September. Here’s a roundup of everything we know about Samsung’s upcoming foldable devices ahead of their official debut. When can we expect Samsung’s new foldables? The Galaxy Z Fold 7 and Z Flip 7 series were unveiled in July, and Samsung is expected to maintain this timeframe in 2026. Based on previous reports from Korean sources, Samsung will hold its Unpacked event on July 22 in London, UK, to pull back the curtain on the Galaxy Z Fold 8 series. The devices are also expected to hit the shelves a few weeks after launch. However, Samsung has yet to announce an official date. A new naming scheme? One of the most interesting changes we might see this year is a new naming scheme for Samsung’s latest foldables. SamMobile reported that since Samsung is expected to unveil three foldables this year, it has adopted a new naming strategy to simplify product identification for customers. Accordingly, the standard Galaxy Z Fold 8 will reportedly be called the Galaxy Z Fold 8 Ultra and will serve as the direct successor to last year’s Galaxy Z Fold 7. The “Ultra” suffix suggests the phone could feature higher-end specifications, such as additional rear camera modules. Samsung’s new passport-style foldable is expected to carry the Galaxy Z Fold 8 name without any suffix. This model is reportedly equipped with two rear cameras. No major changes are expected for the Flip model. Galaxy Z Fold 8 Ultra and Z Flip 8 anticipated specs Rumors over the past few months suggest Samsung is preparing several upgrades for its upcoming foldables, although the devices may continue to rely on larger batteries and faster charging speeds rather than dramatic design changes. The primary focus this year is expected to be the Galaxy Z Fold 8 and its wide-screen design. Galaxy Z Fold 8 Ultra official CAD renders - Image via AndroidHeadlines Here are the anticipated specifications for the Galaxy Z Fold 8 Ultra based on previous leaks: 6.5-inch outer display and 8-inch inner display, 120Hz refresh rate, and 2,600 nits peak brightness Snapdragon 8 Elite Gen 5 processor, paired with 12GB or 16GB of RAM and 256GB, 512GB, or 1TB of storage 4.1mm thickness when unfolded and a weight of 210g 200MP main camera, 50MP ultrawide camera, 10MP or 12MP telephoto camera, 10MP cover camera, and 10MP selfie camera 5,000mAh battery with 45W wired charging Android 17 and One UI 9 As for the Galaxy Z Flip 8, the device is not expected to be a major departure from its predecessor, although it could become slightly slimmer. Expected specifications include: Snapdragon 8 Elite Gen 5 or Exynos 2600 processor 12GB of RAM with 256GB and 512GB storage options 6.9-inch Dynamic AMOLED 2X inner dispaly and 4.1-inch Super AMOLED outer dispaly 50MP main camera, 12MP ultrawide camera, and 10MP selfie camera 4,300mAh battery with 25W wired charging Android 17 and One UI 9 Samsung’s foldables are also expected to launch with Gemini Intelligence, Google’s AI suite for automating tasks in Android ecosystem. Moreover, given current memory and component costs, some Galaxy Z Fold 8 Ultra and Z Flip 8 variants could see a price hike. Galaxy Z Fold 8 adopts a wide-screen design The centerpiece of the upcoming Unpacked event could be the Galaxy Z Fold 8, previously rumored as the Galaxy Z Fold Wide. This model adopts a passport-style form factor and is expected to compete directly with Apple’s iPhone Fold. Galaxy Z Fold 8 official CAD renders - Image via AndroidHeadlines Here’s what to expect: 7.6-inch primary OLED display and 5.4-inch cover display, 120Hz refresh rate, 2,600 nits peak brightness, and 4:3 aspect ratio Snapdragon 8 Elite Gen 5 processor, 12GB or 16GB of RAM, and 256GB, 512GB, or 1TB storage options 4,800mAh battery with 45W wired charging 50MP main camera, 50MP ultrawide camera, and 10MP selfie camera Android 17 and One UI 9 The three new foldable phones are unlikely to be the only devices unveiled at Samsung’s Unpacked event. The company is also expected to introduce the Galaxy Watch Ultra 2 and the Galaxy Watch 9 series.
    • Thanks
  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      140
    4. 4
      ATLien_0
      88
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!