Optimize for best video viewing experience

By OxideNOS
in Home Theatre Discussion

 Share

Recommended Posts

Mentor

OxideNOS

Posted
Posted

Currently, I have my old PC connected to 50" Sony HDTV(1080p). I want to know the best possible way to customize and tweak my pc just for video viewing experience. The drivers, the configurations, best software for playing video, may be some hardware accelaration?

I have p4 2.0 ghz and nvidia ti4600 graphic card and 1.5gig of ram.

Any good specific tutorials/advice out there for such optimization? Is there any good software out there that would calibrate it automatically?

Veteran

CelticWhisper

Posted
Posted (edited)

Most sources say you're not going to be able to get 1080p playback on that without dropped frames (multi-core is pretty much a necessity), but if you're talking scaling SD video for viewing on an HDTV, VLC is always a good bet as it has a lot of tweakable options for smoothing, filters, etc. Just make sure you have good source material - 700MB DVDrip downloads of full movies are going to be very hard to make look good on a display of that size. DVDs, on the other hand, should be fine, and while it's been a long time since I worked on the P4 PC I used to have at a previous job, you might be able to pull off 720p video fairly decently. That probably has more to do with the codec and compression ratio - lighter compression 720p (and all video, for that matter) will work better at the cost of more disk space - less number-crunching the CPU has to do in order to decompress and display it. XviD or DivX will be easier than x.264.

As for acceleration on that GPU, I must admit I'm clueless. I'm a bit spoiled for having a Mac as an HTPC, and most video card settings are handled automagically so I'm less experienced when it comes to optimizing. Also, I know NVidia has something like "TrueVideo" or "PureVideo" on some cards that does MPEG-4 acceleration, but I have no idea which models feature it.

Edited by CelticWhisper
Mentor

OxideNOS

Posted
  • Author
Posted
Most sources say you're not going to be able to get 1080p playback on that without dropped frames (multi-core is pretty much a necessity), but if you're talking scaling SD video for viewing on an HDTV, VLC is always a good bet as it has a lot of tweakable options for smoothing, filters, etc. Just make sure you have good source material - 700MB DVDrip downloads of full movies are going to be very hard to make look good on a display of that size. DVDs, on the other hand, should be fine, and while it's been a long time since I worked on the P4 PC I used to have at a previous job, you might be able to pull off 720p video fairly decently. That probably has more to do with the codec and compression ratio - lighter compression 720p (and all video, for that matter) will work better at the cost of more disk space - less number-crunching the CPU has to do in order to decompress and display it. XviD or DivX will be easier than x.264.

As for acceleration on that GPU, I must admit I'm clueless. I'm a bit spoiled for having a Mac as an HTPC, and most video card settings are handled automagically so I'm less experienced when it comes to optimizing. Also, I know NVidia has something like "TrueVideo" or "PureVideo" on some cards that does MPEG-4 acceleration, but I have no idea which models feature it.

I do use vlc player but I am n00b at tweaks such as smoothing and filter and such

Grand Master

ShaneSparky_YYZ

Posted
Posted

VLC Player by far uses less resources for video playback I find as well.

As for playing HD content from PC to TV, you'd need a 6 series Nvidia card / Dual core CPU to handle it at least.

As for filters and stuff I don't use any at all with VLC, I use as is. It works and looks great once installed.

Veteran

_kane81

Posted
Posted

you need to upgrade the video card to something more powerful - the rest of the specs should be ok.

how do you connect the PC upto the TV? I personally suggest VGA @ LCD native, but HDMI seems to be the choice for most people now days, especially with audio via HDMI.

Veteran

CelticWhisper

Posted
Posted
you don't need dual core to play hd video. i don't know why everyone keeps saying that. that video card is lacking though...

Really? I've been able to do 720p fine on a PowerPC G4 867MHz and an Athlon64 3000+ 1.8GHz, but I thought for 1080p you pretty much needed some form of SMP setup.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Windows 11's big performance boost is finally available for all

      By ikjadoon · Posted

      It is silly there is no simple way to check whether this profile has been activated. CFRs are normal, but trying to even hide the fact if it's on / off seems silly, especially for something so user-facing. Surely Microsoft is "proud" of their engineering efforts on this one and ought to display it somwhere in the GUI.
    • Windows 11's big performance boost is finally available for all

      By ikjadoon · Posted

      Many Linux distros are not known for excellent battery life, so I'm not sure that is the best example. A more apt example may be Apple, but Apple's CPUs are simply far more efficient than Intel & AMD at single-threaded tasks like these, so "boosting" is not as power-hungry and less heat-inducing. Not to mention Apple will hardly engage P-cores for basic UI tasks; they use a pretty complicated QoS scheme to only activate P-cores for more serious workloads like HTML / JS execution or decompression or application launch. Microsoft is (smartly) doing it for launch, but also for UI tasks, which is the more nonsensical part: why ... do Windows 11's UIs need modern CPUs to boost? It should load so quickly that there's not even time for the CPU to boost.
    • Windows 11's big performance boost is finally available for all

      By ikjadoon · Posted

      I've not seen any controlled testing and, judging by Microsoft's mentality, within a year, they'll have added so much more bloat, it'll undo any perceptible latency benefit and we'll have boosted the CPU clocks for nothing.
    • Windows 11's big performance boost is finally available for all

      By ikjadoon · Posted

      It depends: heat soak is a thing. Initially on cold boot-up, the heatsinks & heatpipes are at ambient temp. After heatsinks & heatpipes warm up (through normal usage), they don't immediately cool to ambient temp when the load goes away. So their baseline is higher and the trigger point for fans is much less stress. Add a few more CPU spikes → it's too hot to stay at the same fan RPM → fans get triggered to start up up much sooner / get triggered to ramp much more quickly.
    • Euro-Office must default to ODF to be considered "genuinely European", LibreOffice argues

      By Danielx64 · Posted

      Can LibreOffice just shut up and worry about themselves and stop comparing themselves? Do we see Microsoft complaining about euro office?

  • Recent Achievements

    • One Year In
      slackerzz earned a badge
      One Year In
    • One Year In
      highriskpaym earned a badge
      One Year In
    • One Month Later
      highriskpaym earned a badge
      One Month Later
    • Week One Done
      highriskpaym earned a badge
      Week One Done
    • Week One Done
      FBSPL earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      501
    2. 2
      PsYcHoKiLLa
      198
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      74
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!