• 0

Can't install ANY OS!


Question

I'm stumped - pure and simple.

The third computer in our house just got retired since we got a new system for me, my wife got my old system, and her old system was to be donated to a local charity.

As of about 2 weeks ago the system had been running like a champ - no issues of any kind. System had been loaded with XP Home with SP3.

After I got my wifes new system up and running to her satisfaction with all old files restored I wiped the old hard drive using dban and took the OEM system restore DVD and let it run. Normal XP install follows with all the normal stuff (create and format partition, time zone, language etc). Final reboot occurs and when rebooting system hangs with the Windows logo and the progress bar. Tried several things to no success.

Had my XP Pro w/SP2 full retail version available since I put a full version of Windows 7 of my wifes computer so I reformatted and tried installing that - same result.

DL'd and burned an i386 Kubuntu 9.10 iso and tried installing that. Similar result - error said something about "no such device" but I would have to try reinstalling again to copy the error code.

I have tried 3 different hard drives and also ran Memtest on the RAM.

Somebody give me a suggestion on what I should try next?

Link to comment
https://www.neowin.net/forum/topic/844558-cant-install-any-os/
Share on other sites

17 answers to this question

Recommended Posts

  • 0
Tried changing the data cable from the HDDs?

Maybe the SATA/IDE controller is ****ed.

Older computer i.e. pre-SATA. But yes, I've tried that too.

Mother board is a FIC VC37GV with an Intel 845GV chipset

Processor is a Celeron D

HDD is a Western Digital WD1200JB

CD/DVD is a NEC ND-2500A

  • 0

I had this with a brand new laptop that had never had anything installed. I did a "full" format rather than the "quick" format and that solved the issue.

I also had it with another hard drive that had been in use but suddenly went wrong. Linux would install fine but Windows wouldn't. I gave up and used another HD. If you have a spare HD knocking around you should try it, at least as a test.

  • 0
Unplug the power cord, then take the CMOS battery off, the memory out of its slots and unplug the HDD. Wait a few minutes then connect all back together.

Boot from an Ubuntu CD and wipe the entire HDD with the partition manager.

Tried a Ubuntu 9.04 LiveCD this time (maybe Kubuntu 9.10 was too new?). Didn't matter. When I tried running from the CD here's the message I got:

init: rc-default main process (2878) terminated with status 127

  • 0

UPDATE

Well, tried everything I can think of to this point.

- removed the CMOS battery to reset BIOS to factory defaults. FIC has no BIOS updated available anywhere that I could find for this board.

- ran Ubuntu LiveCD

- ran Disk Check to make sure it was a good burn

- ran full Memtest86 with no errors

- tried running the Live CD and go an error that it couldn't find a live file system

- tried installing from the Ubuntu CD and got the same rc-default error I listed in a previous post

- tried doing an Ubuntu install from USB to isolate if it was my CD drive causing the problem - same error as before so CD drive is eliminated.

- repeated the same procedures as above after trying another hard drive - same error so HDD is eliminated.

- repeated the same procedure as aabove after replacing the IDE cables - same error as before so cables are eliminated.

- tried installing XP Pro again. Everything seemed fine until the last reboot when the Windows logo and progress bar came up it froze the second pass of the progress bar animation - left it for hours and no progress. Hard reboot via power button and same thing.

Anybody got any ideas?

  • 0

What spare parts do you have laying around? Do you have an extra power supply? I had a problem with my PSU that required me to do a cold boot in order to get it to boot. It could also be the mother board. Check the capacitors to see if they are ruined (the tops should be flat or slightly indented). If you have a spare computer your can swap all the components aside from the suspect ones and find the faulty component that way.

  • 0
It could be related to video or RAM.

If you any spare parts you could try swapping them.

It's not the RAM - ran the full gamut Memtest 86 without error.

Also isn't the Video - tried both the onbaord intel graphics and the ATI PCI graphics and same errors.

I'm really thinking either the MBD or Proc is fried somehow.

  • 0

Have you tried a bare-minimum install environment?

  • Only one HDD as primary master and CD/DVD drive as primary slave, configured by jumper.
  • Only one RAM stick, in slot0.
  • No PCI cards.
  • No USB devices plugged in (my HP printer once tried to **** up the initial driver installation leading to a reboot chain)
  • On-board LAN cards, sound chip, modem disabled.

Also, you might want to investigate on what changed from the time it did work, and till the time it stopped working. :huh:

Omkar

  • 0
Quick thought is the mobo capacitors could have popped. Once the system heats up with the load of the OS, it could be locking.

A quick physical inspection could confirm.

No visible signs of any blown capacitors - probably would have shown up while running Memtest86 since that took about 30 minutes anyway.

  • 0

Still waiting for the new motherboard and CPU but figured I'd try something different. Since I had already upgraded the other 2 computers in the house to 64-bit Windows 7 or Windows 7/Kubuntu and had used full versions of Windows 7 Pro for each meant that I also had the 32-bit DVDs as well so I figured "Why Not?".

Dropped the DVD in, booted the machine, and waited for the install to hang just like every other Windows 98 SE, XP Home w/SP1, XP Pro, XP Pro w/SP2, Ubuntu 9.04, Kubuntu 9.10, Ubuntu 9.10 (CD), Ubuntu 9.10 (USB), install I had thus far attempted. To my utter astonishment Win 7 32-bit installed without missing a beat :huh:

After the required period of jumping for joy reality sank in. In theory you'd think "Problem Solved" - nope. I've already used the associated product key for my Windows 7/Kubuntu machine and it would not accept the key from a spare Windows 7 64-bit upgrade disk that came with the new computer.

So here's where I stand:

- I have a working install of 32-bit Windows 7

- I've already used the associated product key for my Windows 7/Kubuntu machine

- I have an available key from an unused Windows 7 64-bit upgrade

Anybody know of a legal solution to my dilemma? What do you think the chances are of MS letting me swap my 64-bit product key for a 32-bit product key?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Password Safe 3.72.0 by Razvan Serea Password Safe is a password database utility. Like many other such products, commercial and otherwise, it stores your passwords in an encrypted file, allowing you to remember only one password (the "safe combination"), instead of all the username/password combinations that you use. Once stored, your user names and passwords are just a few clicks away. Using Password Safe you can organize your passwords using your own customizable references—for example, by user ID, category, web site, or location. You can choose to store all your passwords in a single encrypted master password list (an encrypted password database), or use multiple databases to further organize your passwords (work and home, for example). And with its intuitive interface you will be up and running in minutes. PasswordSafe was originally designed by the renowned security technologist Bruce Schneier and released as a free utility application. Password Safe 3.72.0 changelog: Fixed bugs Improved font scale handling - should resolve font size issues on high resolution displays. GH1749 In the Master Password Setup window, "Show Master Password" is no longer truncated on some displays. GH1092, SF1595 Size and position of main window is now correctly restored on scaled displays. SF1630 Keep password expiry date when both password and password expiry are changed; don't clear a non-recurring expiry when the password's changed. SF1628 Custom values can now be copied to the clipboard in read-only mode via Ctrl-C and right-click->Copy Value. New features GH1196 Dark display mode support: Password Safe now supports the system display mode, as well as setting the mode directly via Manage->Options->Display->Display Mode. This change also updates the general "look & feel" of the app to the current Windows theme. Known limitations: The Date picker and keyboard shortcut controls do not switch to dark theme The Customize Toolbar dialog does not switch to dark theme Custom Field support has been added to the more advanced features: Filters XML and Text import and export Comparison, Sync and Merge databases SF938 Custom field values may now be selected by name and copied via a "Copy Custom Field Value..." submenu in the entry context popup menu. SF936 Notes and Custom fields layout now overlap, selectable by tabs, resulting in a more compact and less cluttered layout. SF935 Autotype: Specifying '\v{name}' in the autotype text will cause the corresponding value to be autotyped. Download: PasswordSafe 64-bit | Portable 64-bit | ~20.0 MB (Open Source) Download: PasswordSafe 32-bit | Portable 32-bit View: PasswordSafe Website | Quickstart Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Google DeepMind published a document on June 18, 2026, that may be the most consequential admission yet from a frontier AI lab: alignment training alone cannot guarantee that AI agents will remain under human control, so structural containment must be built before more capable models arrive.............. https://www.techtimes.com/articles/318758/20260620/google-deepmind-ai-control-roadmap-when-alignment-fails-defense-depth-takes-over.htm  
    • I've got a SoundBlasterX G6 that I use in my streaming setup. Sounds great to me and I've had zero issues with the ancient software package so far in Win11. That G6 has 7.1, Dolby, fully working SPDIF and since it's a USB device it's outside of my rig so I don't have to worry about EMF distortion. Looks like for now this is a pass for me as I think I have better hardware....
    • How do you connect 5.1 Speakers to this thing?
    • I agree with both of you... It's absolutely imperative that science is completely based on actual proven facts and hard evidence and is not considered dogmatic in any way. Science is not a religion and it will never be, and that's exactly how it's supposed to be.
  • Recent Achievements

    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
    • Week One Done
      Genuinetonerink- Dubai earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      502
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      88
    4. 4
      Steven P.
      75
    5. 5
      Michael Scrip
      73
  • Tell a friend

    Love Neowin? Tell a friend!