Windows 7 Slow Welcome Screen and Unresponsive Desktop


Recommended Posts

I'm not sure if a solution has been found before, as I've tried searching here and on Google and I've come up with nothing.

Anyway, here's my problem. I go to boot into Windows 7 and the boot is rather quick, up until the Welcome Screen. To give a rough estimate on times, once Windows 7 starts loading (the animated flag) until when the screen goes black (right before the Welcome Screen) takes about 12 seconds. Once the welcome screen starts going it takes almost another 10 seconds before it loads. Then when it finally reaches my desktop, the icons on my superbar are white file icons for several seconds then they change back, and my computer continues to be unresponsive for about another 10 seconds after that.

I have tried the usual, including disabling services and making sure nothing is running at startup. This has happened even on a fresh load.

Here are my two questions...

1. Am I achieving a normal boot time for my specs? I have seen several videos where the welcome screen is rather instant, unlike on my system.

2. Is anyone else experiencing a rather unresponsive desktop on boot?

I don't think that my system should have either of these problems, especially the unresponsive desktop for several seconds after boot. XP has neither of these problems, and I am usually able to boot in 15 seconds or so (from memory, I haven't used XP for a while now, but I do know it was much quicker than 7) and reach a usable desktop almost immediately. Other than that, Windows 7 flies on this machine.

Here are my specs if you can't see my signature.

Windows 7 x86 RTM (and x64; I've tried both, no difference)

Intel Core 2 Quad Q9400 2.66 GHz

Corsair XMS2 4GB DDR-800

BFG GeForce 9800 GT OC 512MB

ST380815AS 80GB SATA 7200RPM (Boot Drive)

Hitachi HDS721515PLA380 160GB SATA 7200RPM (Game/Backup Drive)

Fujitsu MHZ2080BH G2 80GB SATA 5400RPM (Backup Drive)

Thanks!

I wouldn't call it bad, but it's not normal either. Especially for a fresh (clean?) load.

Having those hdds though, that's going to be the trouble there for sure.

That's what I was thinking. It doesn't seem horrible by any means, but it's not exactly great either, and the unresponsive desktop is really frustrating.

Having all of them connected at one time, or are you referring to the hard drives themselves being slow? I know the one I am using for my boot drive came out of an HP that didn't have this issue with Vista (I know this is a different OS altogether, but I figured it was worth mentioning).

That's what I was thinking. It doesn't seem horrible by any means, but it's not exactly great either, and the unresponsive desktop is really frustrating.

Having all of them connected at one time, or are you referring to the hard drives themselves being slow? I know the one I am using for my boot drive came out of an HP that didn't have this issue with Vista (I know this is a different OS altogether, but I figured it was worth mentioning).

I have much worse specs than you and it hangs for a few seconds after entering the password. Really irritating. I convinced it is an issue with Windows itself because I have seen it happen across multiple setups.

I haven't seen it happen on any Windows 7 computer with good specs. We run it at work on Netbooks and yes, it can take 10-30 seconds to get to the desktop (depending if your profile has been cached or not), which I think is fair enough.

If your machine/s aren't up to scratch, then thats the cause usually...

I haven't seen it happen on any Windows 7 computer with good specs. We run it at work on Netbooks and yes, it can take 10-30 seconds to get to the desktop (depending if your profile has been cached or not), which I think is fair enough.

If your machine/s aren't up to scratch, then thats the cause usually...

What are the specs of these good machines? I would like to know for comparison. My machine is by far the best system of the market, but I would consider it pretty powerful.

Well considering I just loaded it on my spare Intel iMac (1st gen) which has 1 (ONE) gb of ram and an 80gb WD hdd in it and it doesn't stall at the login screen, would that answer your question?

The main system I have here (am on it now), is more powerful than the one in your sig without issues. My friend's PC matches most of the specs of yours, and she has no issues either. Different HDD's though, which again, is my suggested culprit.

Well considering I just loaded it on my spare Intel iMac (1st gen) which has 1 (ONE) gb of ram and an 80gb WD hdd in it and it doesn't stall at the login screen, would that answer your question?

The main system I have here (am on it now), is more powerful than the one in your sig without issues. My friend's PC matches most of the specs of yours, and she has no issues either. Different HDD's though, which again, is my suggested culprit.

Thanks for the quick response.

I may try reloading Windows on a spare 160GB Western Digital Drive. It's around the specs of a WD Blue if I'm not mistaken. Do you think that would be any better?

Remove all the drives from your PC. Put the WD blue in and try it, do a format, load fresh.

I think you'll get good results. Not as good as a Black, but shouldn't be bad either!

Ehh, if you have the cash, splash out on a Raptor - that's what powers my main system. ;)

I was having a similar issue on my two Windows7 laptops, one 32bit, one 64bit (I haven't installed it on a non-laptop yet). After logging in the 'Welcome' screen/message would stay there and spin for ~30secs before finally showing me my desktop. I can't remember where I found it on the 'net, but it my issue was caused because I had changed my desktop background to a solid color. Change it to an image... voila! Welcome only lasts 2-3secs. Go figure.

The paging file shouldn't be causing this. It's more than likely a hardware issue or a shell extension causing problems.

The page file has ALWAYS caused this, even under xp & 2000!

Moving it to another physical hard drive has always sped up windows boot and responsiveness by up to 4 times normal.

Moving it to another partition on the same drive is no good, it has to be on a seperate hdd to windows so you get two lots of HDD bandwidth available to windows.

SSD's are not excluded from this strategy, they're not that much faster than IDE's.

Could be an application too.. Do you have any antivirus installed??? Kaspersky?

I have heard kaspersky has a bug and it will make the desktop unresponsive for a while.

I have Microsoft Security Essentials installed, but this also happened without any antivirus program installed.

The page file has ALWAYS caused this, even under xp & 2000!

Moving it to another physical hard drive has always sped up windows boot and responsiveness by up to 4 times normal.

Moving it to another partition on the same drive is no good, it has to be on a seperate hdd to windows so you get two lots of HDD bandwidth available to windows.

SSD's are not excluded from this strategy, they're not that much faster than IDE's.

I tried this, and the boot times were actually worse with the page file on a different drive.

Remove all the drives from your PC. Put the WD blue in and try it, do a format, load fresh.

I think you'll get good results. Not as good as a Black, but shouldn't be bad either!

Ehh, if you have the cash, splash out on a Raptor - that's what powers my main system. ;)

I think that's what I'm going to end up trying. I don't have enough money to drop on a Raptor right now, but I wish I did :(.

Here are the times I recorded using my iPod Touch's stopwatch.

Page File on C: Drive

21 seconds to Welcome Screen

32 seconds to Desktop

38 seconds to Responsive Desktop

Page File on Seperate Drive

36 seconds to Welcome Screen

48 seconds to Desktop

57 seconds to Responsive Desktop

The only thing that I have seen anything that has done this was a client of mine installed AVG ontop of MSE which was corrected by removing AVG and reinstalling MSE

I would open the System Configuration Utility and goto the startup tab and uncheck each non microsoft program one by one and restart until you find the offending software

The only thing that I have seen anything that has done this was a client of mine installed AVG ontop of MSE which was corrected by removing AVG and reinstalling MSE

I would open the System Configuration Utility and goto the startup tab and uncheck each non microsoft program one by one and restart until you find the offending software

I only have two startup programs, which include MSE and my Logitech Setpoint software for my mouse. I hadn't even installed setpoint until a week ago, and this problem was happening prior to that.

Page File on C: Drive

21 seconds to Welcome Screen

32 seconds to Desktop

38 seconds to Responsive Desktop

Page File on Seperate Drive

36 seconds to Welcome Screen

48 seconds to Desktop

57 seconds to Responsive Desktop

That's quite a noticeable effect, and would lead me to think that maybe it's this second drive that's causing the problem. I'd certainly try just using one HDD; removing the others, and format/re-install. If you've got time, repeat this for all your drives to try and see if one drive is particularly slower than the others.

That's quite a noticeable effect, and would lead me to think that maybe it's this second drive that's causing the problem. I'd certainly try just using one HDD; removing the others, and format/re-install. If you've got time, repeat this for all your drives to try and see if one drive is particularly slower than the others.

I believe I tried disconnecting the other drives and using only the one, but it can't hurt to try again. I'll let you know if that helps at all.

If that doesn't make a difference I will try using the other drive I was talking about earlier.

One other thing that occurs to me... It may seem obvious, but have you checked that you have SATA drivers installed? I know when I installed 7 it was running OK-ish, but ran much better when I went and got the proper drivers from the Dell (in my case) website. In fact, I had to grab quite a few drivers for various hardware before everything was working just right.

I believe I tried disconnecting the other drives and using only the one, but it can't hurt to try again. I'll let you know if that helps at all.

If that doesn't make a difference I will try using the other drive I was talking about earlier.

Can you look at the Cpu resource usage in task manager?

One other thing that occurs to me... It may seem obvious, but have you checked that you have SATA drivers installed? I know when I installed 7 it was running OK-ish, but ran much better when I went and got the proper drivers from the Dell (in my case) website. In fact, I had to grab quite a few drivers for various hardware before everything was working just right.

I've looked all over, my motherboard's website, Intel, Google, and I can't find a SATA driver for my motherboard (ECS Elitegroup G31T-M) :(

My motherboard disk does include a SATA RAID driver though, is that what I'm looking for? Does the Chipset driver include a SATA Driver? I can get that off of the motherboard's website as well.

Can you look at the Cpu resource usage in task manager?

cpuboot.jpg

Here is a screenshot of the Task Manager displaying my CPU usage right after boot. It doesn't go above 50% for each core, but does spike randomly. Is that normal?

The O.P. also said he did a fresh install and got the problem - so we've ruled out ANY external application.

SATA drivers (unlikely) or hard drives are the only remaining thing that could produce this sort of problem.

It's also NOT related to the page file, moving it to another drive is going to achieve nothing, or degrade performance in many cases.

BB:

That's normal, services are starting and getting ready for use. (Indexing, Superfetch, etc).

In your device manager - what IDE controllers do you have listed?

They'll have the SATA controllers there, i'll let you know which driver/s you may need, if any.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Euro-Office must default to ODF to be considered "genuinely European", LibreOffice argues by David Uzondu Euro-Office is a web-based collaborative office suite that positions itself as a "European sovereign alternative" to American tech companies, backed by a coalition of developers including Nextcloud, IONOS, Abilian, BTactic, OpenProject, and, more recently, Tuta. The project officially went live a couple of days ago, but not before drawing heavy fire from LibreOffice developers, who called the marketing claim that Euro-Office represents the "first open-source office suite developed in Europe" a deceptive historical inaccuracy because projects like OpenOffice and LibreOffice existed decades earlier. Now that the project has launched, LibreOffice is back with another complaint, arguing that Euro-Office cannot consider itself "genuinely European" while it pushes proprietary Microsoft defaults on users. Euro-Office had promised to improve the OpenDocument Format (ODF) back in April, but the current release still plagues users with several technical failures. For instance, the suite lacks an admin setting to enforce ODF, and mobile editors completely block ODF saves, forcing files into Microsoft's OOXML formats. Some configurations force files into read-only mode, while editing frequently corrupts document formatting or erases data. LibreOffice thinks that merely supporting a format as an afterthought does not make you a sovereign alternative, as file formats are the battleground where" digital sovereignty is won or lost." The road to the first stable release of Euro-Office has been quite bumpy due to an aggressive public fallout with OnlyOffice, from which the coalition originally forked the project. OnlyOffice struck back by accusing the coalition of violating copyright terms under its AGPLv3 branding requirements by stripping the original branding anyway and forking the code. Getting Euro-Office up and running is a bit wonky (at least for non-technical users), as there is no direct installer to grab off the web. The easiest way we learnt is by using Docker. First, pull the official Euro-Office image from the GitHub Container Registry: docker pull ghcr.io/euro-office/documentserver:latest Then, run the container with active ports and a secure JWT token, enabling the test environment: docker run -i -t -d -p 8080:80 --restart=always -e EXAMPLE_ENABLED=true -e JWT_SECRET=my_secure_jwt_secret ghcr.io/euro-office/documentserver:latest And finally, open a web browser and go to the following address: http://localhost:8080 If you are running this on a remote server, replace localhost with your server's IP address. You will see the Euro-Office test page, where you can create new text documents, spreadsheets, or presentations directly in the browser. Image via Euro-Office Nextcloud promises that proper standalone desktop versions and mobile apps will arrive in a future release.
    • It’s any of their products not just windows.
    • Google Gemini has been failing for users across the United States, Europe, and Asia since early Wednesday morning, June 10, 2026, and more than six hours into the incident Google has yet to declare a fix............. https://www.techtimes.com/articles/318152/20260610/google-gemini-outage-tops-six-hours-errors-1076-1099-worldwideflash-lite-still-answers.htm
    • Fun fact: There are more Warhammer 40k games than there are stars in the universe.
  • Recent Achievements

    • Week One Done
      FBSPL earned a badge
      Week One Done
    • One Year In
      Jim Dugan earned a badge
      One Year In
    • One Month Later
      Tommi118 earned a badge
      One Month Later
    • One Month Later
      sjbousquet earned a badge
      One Month Later
    • Week One Done
      sjbousquet earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      486
    2. 2
      PsYcHoKiLLa
      197
    3. 3
      +Edouard
      155
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      69
  • Tell a friend

    Love Neowin? Tell a friend!