Which services can I set to Automatic (Delayed)


Recommended Posts

The delayed start will be of no use. The system would get to desktop some milliseconds faster but after a minute (which, I believe, was this delay) it would start grinding anyway. That feature is not meant to be abused this way.

To permanently shave off those milliseconds, you'll have to find the services you don't need (there's a lot of them and even more if you hate Homegroups) and explicitly disable them. There's good guides on the internets, too. But take care. I've done it quite a few times since XP days and still can't get it straight :laugh:

why don't you just export your services via export list feature? You can export to a nice CSV and then open in your fav speadsheet software and sort, etc. etc.

I personally would not suggest you dick with any services unless your 100% confident in what they do, and how they interact with other services, etc. So you here asking tells me you really shouldn't be dicking with them ;)

Now if your interested in delayed start up of things, take a look at the free software http://www.soluto.com/ gives nice gui to work with showing you how long each thing adds to your startup, what others do with the service/application/etc.

But to your exporting your services via scrolling screencapture -- here this is much better way to do it ;)

post-14624-0-15187100-1322511437.jpg

why don't you just export your services via export list feature? You can export to a nice CSV and then open in your fav speadsheet software and sort, etc. etc.

I personally would not suggest you dick with any services unless your 100% confident in what they do, and how they interact with other services, etc. So you here asking tells me you really shouldn't be dicking with them ;)

Now if your interested in delayed start up of things, take a look at the free software http://www.soluto.com/ gives nice gui to work with showing you how long each thing adds to your startup, what others do with the service/application/etc.

But to your exporting your services via scrolling screencapture -- here this is much better way to do it ;)

post-14624-0-15187100-1322511437.jpg

Okie, I will give that Soluto a try.

Thanks again!

The system defaults are fine and are in the optimal state, but windows will change them by itself if needed. If you wanna try changing them then your playing fire, with fire.

why don't you just export your services via export list feature? You can export to a nice CSV and then open in your fav speadsheet software and sort, etc. etc.

I personally would not suggest you dick with any services unless your 100% confident in what they do, and how they interact with other services, etc. So you here asking tells me you really shouldn't be dicking with them ;)

Now if your interested in delayed start up of things, take a look at the free software http://www.soluto.com/ gives nice gui to work with showing you how long each thing adds to your startup, what others do with the service/application/etc.

But to your exporting your services via scrolling screencapture -- here this is much better way to do it ;)

post-14624-0-15187100-1322511437.jpg

Thanks so much Budman!!! Soluto got my boot time down from 5:49 to 1:54!

You rock!!

Can you please tell us WHY you want to delay these services?

See my reply to Budman.

@Budman,

According to Saluto the maim culprit was the google stuff, Toolbar, updater, some task checker, a few logon tasks and the Picasa update checker. That was the brunt of it. so I got rid COMPLRTELY of all of the google stuff. I had a few small stuff it said I could delay, Can't remember now and don't know where the log tbh.

But it worked WAY better than I ever thought. Now that's the boot from the first time I see the desk top to when it's basically ready for use right?

I am still slow at boot when the welcome screen is up with the rotating circle. Any thought on that?

Thanks, Again!!

Sorry to barge in on this thread, but I have to say that I got very confused reading through this. Devnullore and Devnull are the same person, right? I didn't think that we were allowed multiple accounts? :shifty:

Back on topic, that is an huge drop in your boot time. Then again, things like the toolbar and update checkers are normally one of the first things I get rid of. The toolbar is useless to me, and since I manually check for updates I see no need to get bogged down by all the applications starting at once to do a check.

a 5 minute boot time, wtf i havnt touched any of my services and im to the desktop in prolly less than a minute

in windows 7 I get to the desktop from post in under 30 seconds... and I have tons of stuff installed, and on a rotational drive too!

@Intrinsica

Yes, sorry. After several boots the "Welcome" screen is no longer taking so long to present the desktop. I guess it's true. Windows 7 learns how you boot and optimizes it.

About the Devnull and Devnulllore, I will have to look into that. I am not aware of having multiple accounts but I will see what's going on and post my findings

Thanks,

@Intrinsica,

HI,

Yes I did in fact end up with 2 accounts. I have no idea how that happened. I messaged admin to delete the "Devnull" account and keep this account.

Sorry all...my bad somehow.

Other fast boot option is to just standby vs off ;) My main home machine is set to standby after like 10 minutes - I'm always on and off at all times sometimes 2 am in the morning if I wake up or get a work call, etc. Even remotely so I just wake it up via my vpn connection and can rdp to it in like 10 seconds or something.

Cold boot is around 1 minute or something - have to check my soluto logs. I keep toying with the idea of going SSD, but I don't have any problems with time of software to load, pretty much instant anyway. So since its normally only in standby the pretty much instant on you could see with SSD would not be something I would really notice. But SSD is on my toys to get list ;)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Simple answer is yes, you will still get the Windows updates and as long as browser is up to date, you will be good. Only thing secure boot does is protect you against boot level threats and make it harder to install other OS's. I've been looking into this pretty thoroughly lately myself as wifes computer has secure boot disabled plus my other, older computers that run Linux, don't have secure boot enabled. Have seen all kinds of questions about this on the Linux Mint and MX Linux forums. Just don't suddenly enable secure boot now.
    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.1 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) Download: AltSendme 0.4.1 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You are mostly right about the ephemeral nature of it. As I mention in the article, if you dont add a second device or take a backup of your account before uninstalling it, then yes you will lose access to your account. That said, in terms of actual user experience when you sync multiple devices your message history carries across and there's also a Saved Messages chat like there is on Telegram to send messages and attachments between your installs. But yh, what you point out are correct and its not trying to emulate Messenger or Telegram.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!