Can An iPhone "Crash" My Wireless Network?


Recommended Posts

So as the thread title states, would it be possible for my iPhone to somehow knock out my entire Wireless Network?

Not sure if it is a coincidence or not, but 2 times now in the past 4 days when I have come home from work, my Wireless Network goes down pretty much as soon as I walk in the door. I know this as my wife works from home, and her work laptop is connected to a VPN through my Wireless Network.

I do more often than not leave my iPhone WiFi on, so basically when I get home it just auto connects to my WiFi Network.

So is this actually possible? Or is it just a mere coincidence?

I should add that last night, my laptop actually got booted off my network as well. I was able to connect to my alternate WiFi network I have setup and then I was immediately able to connect back to my main WiFi network. As far as my alternate network, it is an access point in my upstairs that was originally going to be a repeater, but I decided to just set it up as a compositely different Wireless N network. When I remember to I switch to it upstairs with my iPhone/iPad. It has been setup like this for about 5 months now, so if it is somehow it causing the issue, it is weird it took all this time to do so.

So back to the main issue, if my iPhone is somehow causing my entire Wireless Network to crash for a few seconds when I enter my home, is there anything I can do to fix it? I did just reset my router completely, so will see how that makes out, but literally this is a pretty serious issue as my wife's work completely relies on the VPN connection, and she always loses data every-time this happens.

TIA for any help.

DL

I am going to tell you something very funny that is happening to me right now and has been happening to me. My iMac is connected to my modem/router wirelessly and so is my laptop and my Apple TV. For some strange reason, I cannot use my iMac, Apple TV and iPhone on the internet at the same time!!!!!!

If I have my iMac "on" and connected and I turn on my Apple TV, the iMac disconnects from the internet. Same thing if I try to connect my iPhone to the wireless, my iMac or Apple TV gets disconnected or my iPhone won't connect at all. I can't explain it. It is super weird. If anyone has an explanation for this, please fell free to let me know!!!

DD-WRT if possible. I highly recommend installing a reliable 3rd party firmware like DD-WRT on yoru router if it is supported.

I had random issues with my Wireless-N Linksys router that were just driving me mad. I mean like rebooting it multiple times a day and IP conflicts and you name it. At one point the Wireless just stopped working altogether and I thought the router was dead. Took a chance and installed DD-WRT, and the thing works extremely well now. I think i've rebooted it twice since installing DD-WRT and the level of customization you can do with DD-WRT is amazing. Love it. Highly recommend it.

to somehow knock out my entire Wireless Network

How do you recover from this? Reset the router? Once reset can your iPhone connect along with your other devices just fine? It could be purely coincidental...i dunno.

P.S. If you go with DD-WRT, setting up IP address reservations for each of your devices would be a good thing to do IMHO. I setup all my families devices in the 192.168.1.2xx range and all others default to the 1xx range. This makes it easy to quickly look at my list of connections and spot any unusual activity and it also means a lot less IP conflicts. Between all of our computers, smartphones, and devices (xbox, directv, vonage), I think we are pushing about 20 wired and wireless connections. Before DD-WRT it seems one of the kiddoes would be asking me "why does this say I have a conflicting IP address?" all the damn time, lol.

I am going to tell you something very funny that is happening to me right now and has been happening to me. My iMac is connected to my modem/router wirelessly and so is my laptop and my Apple TV. For some strange reason, I cannot use my iMac, Apple TV and iPhone on the internet at the same time!!!!!!

If I have my iMac "on" and connected and I turn on my Apple TV, the iMac disconnects from the internet. Same thing if I try to connect my iPhone to the wireless, my iMac or Apple TV gets disconnected or my iPhone won't connect at all. I can't explain it. It is super weird. If anyone has an explanation for this, please fell free to let me know!!!

That is incredibly weird, definitely. But I cannot help but notice a common thread here. Both of us are having issues with Apple products. And IIRC, I believe they just did a Software Update for the Airport card in my Macbook. That is the laptop that got booted.

DD-WRT if possible. I highly recommend installing a reliable 3rd party firmware like DD-WRT on yoru router if it is supported.

I had random issues with my Wireless-N Linksys router that were just driving me mad. I mean like rebooting it multiple times a day and IP conflicts and you name it. At one point the Wireless just stopped working altogether and I thought the router was dead. Took a chance and installed DD-WRT, and the thing works extremely well now. I think i've rebooted it twice since installing DD-WRT and the level of customization you can do with DD-WRT is amazing. Love it. Highly recommend it.

How do you recover from this? Reset the router? Once reset can your iPhone connect along with your other devices just fine? It could be purely coincidental...i dunno.

3rd party firmware is not an option. Verizon FIOS is my ISP and (unfortunately) they provide their own router. An Actiontec MI424WR (Rev E).

If I could I would install it, as when I had a different ISP, I had the Hyper DD-WRT firmware on my Linksys WRT54G back in the day and did really like it.

And I do not have to reset the router, it just comes back up on it's own. That is why I changed the title to crash, as that is what happens, it is like the WiFi Network crashes, and then just boots up on it's own.

Really is bothering the hell out of me. I have literally had zero issues with my Network up until this past week and I have had the same router for over 3 years now. No new hardware on my network either. It just seems as if it is my iPhone that is the culprit as that is technically the only device that is on when I walk in the door. My Macbook is always powered down so it is not connecting.

put in a router or wap behind the verizon pos actiontek to handle your wireless.

This (Y).

I'd just connect the actiontec to the "Internet port" on a decent router that I knew supported dd-wrt well. Then treat the actiontec as a modem (turn off the wireless and set your 1 connection, your real router, in the demilitarized zone.)

Whenever I'm at my mothers house my iPad crashes her Belkin router every 4/5 times. The whole thing just freezes and all connected computers are immediately disconnected.

I've not yet managed to ever have my MacBook Pro and iPad on that router at the same time successfully.

My Windows laptop and Android phone (+ her Windows laptop) don't cause any problems with it.

I think Dirty Larry is right. There seems to be something weird going on with the Apple products not being able to all connect at the same time on the same wireless. I have had customers that call with the same issue and my GF has the same problem too. Very strange indeed.

i have an ipad connected to my network with my bb, my computer, and my laptop and nothing drops for me. I think it is a crappy wireless.

Okay. Up until this past week when I started experiencing issues, I have...

2 iPads, 3 laptops (1 Macbook OS X 10.7.3, 1 Windows 7, 1 Windows XP), 2 iPhones, 1 iMac, 2 iPod Touches & 1 Printer, all connected via WiFi. That is 11 concurrent connections. If my math is correct, that is about 6 more things then you have. I have literally had this setup, or something very similar (in fact at one point more things connected via WiFi), for almost 4 years.

I also have 2 PS3's, my audio receiver, my TV, my Windows Based Gaming PC, my XBox 360, My Wii, 2 Printers, all connected via hard wire.

So Yes, Actiontec is not the best routers out there, but I really do not see how it is "crappy wireless" if it has not given me ZERO issues up until this point for literally the past 4 years. I can forward ports like any other routers. Set up DNS. Whatever the case may be. So yeah, really do not see how it is crappy. The best? Absolutely not. But 4 years it has been rock solid, so I hardly call that crappy.

But yeah, thanks for the constructive feedback.

I really do not see the need to install another router when this router has been perfectly fine for me all this time. I can do everything anyone else can do on other routers with it. I know this as prior to this I had other routers.

I really am trying to find out why in the past week it has been all of a sudden crapping out. If anyone can possibly provide a reason as to why it is happening, I appreciate it. Otherwise I already have the suggestion about adding another router. If the problem persists perhaps I will look into that, but I would rather fix the problem.

Also, just so people understand, apparently if I do go ahead and make the supplied modem from Verizon into a modem, I lose all my On Demand capabilities and also any ability to connect to Verizon's servers for my DVR, etc. This router also is the cable connection itself. It is what it is, so making it a modem, not an option. So again, I prefer to try and troubleshoot the issue itself.

No issues with my iPad 2, iPhone 4S, Samsung Galaxy Nexus, Motorola Xoom, Samsung Galaxy Player 5, Chromebook, Two Wired Desktop Computers running Windows 7 Ultimate Edition and one laptop running Windows 7 Professional.

No issues with my iPad 2, iPhone 4S, Samsung Galaxy Nexus, Motorola Xoom, Samsung Galaxy Player 5, Chromebook, Two Wired Desktop Computers running Windows 7 Ultimate Edition and one laptop running Windows 7 Professional.

Again, as I stated, I have not had any issues in the past 4 years until this past week.

But thanks for sharing you are not having issues with your home network. That helps me troubleshoot the issue I am now having.

Again, as I stated, I have not had any issues in the past 4 years until this past week.

But thanks for sharing you are not having issues with your home network. That helps me troubleshoot the issue I am now having.

I should have also stated that I too have FiOS however, I turned off the wireless on the Actiontec Router and bought a more reliable Wireless router (Belkin).

Short answer is yes, there is known (by apple) issues that cause routers to crash, Facetime being the main culprit for this on the 4s, it seems to happen to quite a lot of users out there me included, and it supposed to be fixed in iOS 5.1 when they release it, till then there is nothing you can do to stop this from what I have been told and have read as the idevice sends the occasional rouge thing to router which causes the crash, so I am assuming it is something in the uPnP (although I could be wrong on this)

That is incredibly weird, definitely. But I cannot help but notice a common thread here. Both of us are having issues with Apple products. And IIRC, I believe they just did a Software Update for the Airport card in my Macbook. That is the laptop that got booted.

3rd party firmware is not an option. Verizon FIOS is my ISP and (unfortunately) they provide their own router. An Actiontec MI424WR (Rev E).

If I could I would install it, as when I had a different ISP, I had the Hyper DD-WRT firmware on my Linksys WRT54G back in the day and did really like it.

And I do not have to reset the router, it just comes back up on it's own. That is why I changed the title to crash, as that is what happens, it is like the WiFi Network crashes, and then just boots up on it's own.

Really is bothering the hell out of me. I have literally had zero issues with my Network up until this past week and I have had the same router for over 3 years now. No new hardware on my network either. It just seems as if it is my iPhone that is the culprit as that is technically the only device that is on when I walk in the door. My Macbook is always powered down so it is not connecting.

YEs it is. The deli i visit every day has a verizon fios router and i cannot use wifi in the area of his router at all. I cannot even use another access point. I wonder if its the router and not your iphone since it happens to me with a fios router also.

I should have also stated that I too have FiOS however, I turned off the wireless on the Actiontec Router and bought a more reliable Wireless router (Belkin).

Indeed, that little bit of information about also having FIOS helps tremendously. I was thinking to myself "thanks for sharing, but how is that relevant to me." :laugh:

Short answer is yes, there is known (by apple) issues that cause routers to crash, Facetime being the main culprit for this on the 4s, it seems to happen to quite a lot of users out there me included, and it supposed to be fixed in iOS 5.1 when they release it, till then there is nothing you can do to stop this from what I have been told and have read as the idevice sends the occasional rouge thing to router which causes the crash, so I am assuming it is something in the uPnP (although I could be wrong on this)

YEs it is. The deli i visit every day has a verizon fios router and i cannot use wifi in the area of his router at all. I cannot even use another access point. I wonder if its the router and not your iphone since it happens to me with a fios router also.

Okay thanks for the replies. I am leaning towards the fact that something happened with the iPhone itself recently that is causing it. Because as I shared, zero issues up until this past week. So history is telling me it is not the router if I did not have issues in the past. So I think some kind of App Update, or some kind of iOS Software Update, or something along those lines that is the culprit. Just to many Apple users in this thread alone saying they have issues with WiFi and their Apple devices. So I am going to try disabling some services on my iPhone and take it from there.

Thanks All. (Y)

"so I am assuming it is something in the uPnP"

I would turn this off as first option on router - this in theory could be interacting with your router that could in theory cause it grief in malformed requests, etc. But shouldn't take the whole router down -- maybe causes upnp not to function.

Might be dhcp as well -- some sort of malformed request or something the router just doesn't like.. So you could try setting IP to static on devices vs dhcp. But this shouldn't crash the whole router - it should at worse crash the dhcp server on the router.

Next thing is I guess a bad dns query could cause the dns service on the router to crash the thing.. Point to different dns than your router. Again should only crash that services -- which maybe it is? What exactly happens when this happens? Can you not access the routers gui, can you not ping anything by IP.. What are the symptoms in detail vs it doesn't work ;)

I do find it hard to believe that device is crashing the AP -- having issue with using it, ok -- but crash the whole thing so nobody can use it.. This seems like buggy code on the router side. Even if sending messed up packets, shouldn't crash the router.. This would clearly be a FUN exploit... Crashing all the open AP ;) hehehe j/k

If you really want to get to the bottom of it -- I would say you should fire up wireless sniffing and take a look at exactly when the thing crashes on what packets were sent.

If anyone has any links to info about apple products crashing wireless routers I would be interested in links.

Okay. Up until this past week when I started experiencing issues, I have...

2 iPads, 3 laptops (1 Macbook OS X 10.7.3, 1 Windows 7, 1 Windows XP), 2 iPhones, 1 iMac, 2 iPod Touches & 1 Printer, all connected via WiFi. That is 11 concurrent connections. If my math is correct, that is about 6 more things then you have. I have literally had this setup, or something very similar (in fact at one point more things connected via WiFi), for almost 4 years.

I also have 2 PS3's, my audio receiver, my TV, my Windows Based Gaming PC, my XBox 360, My Wii, 2 Printers, all connected via hard wire.

So Yes, Actiontec is not the best routers out there, but I really do not see how it is "crappy wireless" if it has not given me ZERO issues up until this point for literally the past 4 years. I can forward ports like any other routers. Set up DNS. Whatever the case may be. So yeah, really do not see how it is crappy. The best? Absolutely not. But 4 years it has been rock solid, so I hardly call that crappy.

But yeah, thanks for the constructive feedback.

I really do not see the need to install another router when this router has been perfectly fine for me all this time. I can do everything anyone else can do on other routers with it. I know this as prior to this I had other routers.

I really am trying to find out why in the past week it has been all of a sudden crapping out. If anyone can possibly provide a reason as to why it is happening, I appreciate it. Otherwise I already have the suggestion about adding another router. If the problem persists perhaps I will look into that, but I would rather fix the problem.

Also, just so people understand, apparently if I do go ahead and make the supplied modem from Verizon into a modem, I lose all my On Demand capabilities and also any ability to connect to Verizon's servers for my DVR, etc. This router also is the cable connection itself. It is what it is, so making it a modem, not an option. So again, I prefer to try and troubleshoot the issue itself.

I've had wireless routers start acting up on me in 3-4 years time. To be honest, it wouldn't surprise me if the router wasn't working as well today as it did when it was brand new. Some routers have the "reset" button on the back with special instructions on how to REALLY reset the router. Like Linksys routers you hold reset for 30 seconds, unplug for 30 seconds, plug back in for 30 seconds (all while holding reset), and release the reset. This completely resets the software which I've found works in most cases of routers acting up.

That being said, all WiFi sends signals over the air at the same frequency. It is possible that Apple products may interact with WiFi in such a way that the signals coming from other devices can't compete and then drop off the network (I'm just guessing).

Changing the channel is a good idea. Are you surrounded by a bunch of other APs from neighbors?

Again, as someone who has been through several wireless routers at home all my problems went away with a DD-WRT setup.

I am going to tell you something very funny that is happening to me right now and has been happening to me. My iMac is connected to my modem/router wirelessly and so is my laptop and my Apple TV. For some strange reason, I cannot use my iMac, Apple TV and iPhone on the internet at the same time!!!!!!

If I have my iMac "on" and connected and I turn on my Apple TV, the iMac disconnects from the internet. Same thing if I try to connect my iPhone to the wireless, my iMac or Apple TV gets disconnected or my iPhone won't connect at all. I can't explain it. It is super weird. If anyone has an explanation for this, please fell free to let me know!!!

They are all set to use the same static IP adress ?

Another reason why I don't like Apple products and never bought one. I just won an iPod touch once ....

My father has a problem at work with his iPhone, nobody can connect to the network with their own iPhones ... but all other devices are fine (Android), including the iPad they use to monitor the machinery when they have to step away from the control center.

Also, just so people understand, apparently if I do go ahead and make the supplied modem from Verizon into a modem, I lose all my On Demand capabilities and also any ability to connect to Verizon's servers for my DVR, etc. This router also is the cable connection itself. It is what it is, so making it a modem, not an option. So again, I prefer to try and troubleshoot the issue itself.

Might be a pain but maybe a reset on the iPad as maybe a background app is causing the crash or check if there were any updates to any apps over the last 4 weeks.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.43 by Razvan Serea Tixati is a free and easy to use BitTorrent client featuring detailed views of all seed, peer, and file transfer properties. Also included are powerful bandwidth charting and throttling capabilities, and a full DHT implementation. Tixati is one of the most advanced and flexible BitTorrent clients available. And unlike many other clients, Tixati contains NO SPYWARE, NO ADS, and NO GIMMICKS. Tixati portable version is meant to run on a USB flash drive or other portable media. It stores all its configuration files in the same folder as the executable binary files, and all file paths are stored in a format relative to the program executable folder. It is important you do not delete the "tixati_portable_mode.txt" file within the executables folder. This file is what triggers Tixati to run in portable mode. (The executable binaries are actually the same as the standard edition binaries.) When running the portable edition from a USB flash drive, especially one that is formatted in FAT16/FAT32, you may experience some lag when initially loading a new transfer. This is because initializing and allocating large files on flash-based media consumes a greater amount of time and resources compared to a conventional hard-drive. Tixati has the following features: detailed views of all aspects of the swarm, including peers, pieces, files, and trackers support for magnet links, so no need to download .torrent files if a simple magnet-link is available super-efficient peer choking/unchoking algorithms ensure the fastest downloads peer connection encryption for added security full DHT (Distributed Hash Table) implementation for trackerless torrents, including detailed message traffic graphs and customizable event logging advanced bandwidth charting of overall traffic and per-transfer traffic, with separate classification of protocol and file bytes, and with separate classification of outbound traffic for trading and seeding highly flexible bandwidth throttling, including trading/seeding proportion adjustment and adjustable priority for individual transfers and peers bitfield graphs that show the completeness of all downloaded files, what pieces other peers have available, and the health of the overall swarm customizable event logging for each download, and individual event logs for all peers within the swarm expert local file management functions which allow you to move files to a different partition even while downloading is still in progress 100% compatible with the BitTorrent protocol Windows and Linux-GTK native versions available Tixati 3.43 changelog: Several major DHT improvements Added several screening heuristics to filter malicious DHT nodes, prevent Sybil floods Rewrote DHT search algorithms to add support for multi-path lookups Improved DHT logging, more details in several error messages Extended timeout lengths for outgoing queries over I2P Added incoming query / response per second to DHT table status display Updated Regex engine to PCRE2 Faster Search function, scans channel user profiles in much less time Fixed problems with file name parsing and date handling in RSS Faster and more accurate RSS filtering and episode number detection Several optimizations to global text processing functions, such as UTF-8 cleaning, line splitting, and token parsing Complete update of port-mapping UPNP/NAT-PMP engine, added PCP support, mapping over VPN support, and more Several refinements to default gateway detection on Windows / Android, which is used for port-mapping Support for IPv6 interface-scoped addresses, which is sometimes needed for IPv6 gateway detection and port mapping Full support for PCP port remapping, added backup zero-port query in case requested port is rejected New UPNP/NAT-PMP Monitor in Help > Diagnostics New reflected local port/location tracker that analyzes DHT replies to detect true port/location and NAT mapping type New TCP/UDP Ports monitor in Help > Diagnostics, with several statistic and information tabs, and a detailed event log Calculated/reflected local port is now used for port parameter in tracker queries and peer handshake Fixed several problems with Linux Wayland compatibility Completely replaced tray icon functions in Linux, new SNI implementation is now the default with GSI backup Implemented full DBus-Menu server to be used by new SNI tray icon implementation Replaced Linux tray balloon notification DBus client Rewrote auto-shutdown DBus interface for Linux Rewrote sleep inhibit DBus interface for Linux Dropped deprecated Linux dbus-glib dependencies Completely new Windows asynchronous file handling, now using IOCP model with several block-alignment optimizations Better handling of system network resets and interface down/up cycles Added option to fully clear configuration in Settings > Import/Export Remember last option checkboxes when using Import/Export Fixed minor I2P incoming connection routing problems Much faster I2P vanity host name finder Much faster channel user vanity key finder Raised length limit for torrent tracker remote failure messages to 120 from 64 Fixed problems setting download location on a torrent before the meta info is resolved Added location/MOC paths to category pane tooltips Several minor Web Interface fixes Refinements to static and scrolling ellipsizing layout routines Several fixes and improvements to single and multi-line text edit controls Many other minor fixes throughout the user interface A major overhaul of the Android framework has also been done: API target raised to 35, page alignment set to 16K Rewrote all inset processing routines Full rewrite of foreground service, application, and main activity objects New permission request routines Added multi-cast lock request before UPNP/LPDP discovery operations Fixed file permission and locking problems when loading .torrent from web browsers Fixed problems with Z-ordering of modal / non-modal and popup windows Fixed handling of back gesture on newer OS Added status bar icon adjustment based on status bar background color Added option in Settings > UI > Behavior to continue running in tray when task removed from recents App can be closed by swiping away notification Rewrote IME interface, fixed several problems with auto-correct, on-screen keyboard visibility, and cursor positioning Added full support for Android hardware mouse and keyboard function Added full tooltip implementation for Android hovering via mouse or other cursor device Full rewrite of popup menu widgets to better support hardware pointers and keyboard Added mouse cursor updating framework for Android hovering Added Settings > Import/Export to Android builds Added language file support to Android builds Download: Tixati 64-bit | Tixati 32-bit ~20.0 MB (Freeware) Download: Portable Tixati 3.43 | 114.0 MB Download: Tixati 3.43 for Linux | Android View: Tixati Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Firefox 152.0.1 by Razvan Serea Firefox is a fast, full-featured Web browser. It offers great security, privacy, and protection against viruses, spyware, malware, and it can also easily block pop-up windows. The key features that have made Firefox so popular are the simple and effective UI, browser speed and strong security capabilities. Firefox has complete features for browsing the Internet. It is very reliable and flexible due to its implemented security features, along with customization options. Firefox includes pop-up blocking, tab-browsing, integrated Google search, simplified privacy controls, a streamlined browser window that shows you more of the page than any other browser and a number of additional features that work with you to help you get the most out of your time online. Firefox key features Enhanced Tracking Protection (ETP) – Blocks trackers, cookies, cryptominers, and fingerprinters by default. Private Browsing Mode – Deletes history, cookies, and temporary files when closed. Lightweight & Fast Performance – Optimized memory usage with efficient page loading. Cross-Platform Sync – Sync bookmarks, passwords, history, and open tabs across devices. Customizable Interface – Toolbars, themes, and extensions can be tailored to user needs. Strong Privacy Controls – Options to manage cookies, permissions, and site data easily. Reader Mode – Strips away clutter for distraction-free reading. Pocket Integration – Save and read articles offline with Pocket built into Firefox. Picture-in-Picture (PiP) – Watch videos in a floating window while multitasking. Extensions & Add-ons – Vast library for productivity, security, and personalization. Built-in PDF Viewer – No need for external software to view PDFs. Firefox Monitor – Alerts users if their email is part of a known data breach. Multi-Account Containers – Isolate browsing sessions (e.g., work, personal, shopping). Performance & Resource Efficiency – Uses fewer system resources than some competitors. Open Source & Community-Driven – Transparent development with global contributions. Firefox 152.0.1 fixes: Fixed frequent crashes affecting users with Intel Raptor Lake processors. (Bug 2039575) Fixed an issue on macOS where choosing a PDF option, such as "Save as PDF", from the system print dialog would send the job to your printer instead of saving a file. (Bug 2047850) Download: Firefox 64-bit | Firefox 32-bit | ARM64 | ~70.0 MB (Freeware) Download: Firefox for MacOS | 146.0 MB View: Firefox Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Zed 1.7.2 has landed with updated OpenCode models, bug fixes and other improvements by David Uzondu Zed 1.7.2 recently landed on the stable release channel, bringing a host of AI-related features including automatic context compaction and settings-based skill management, along with other things like better Markdown preview rendering and custom git commands in the graph view. Starting with the AI stuff, the developers introduced "/compact", a command that basically summarizes your conversation history on demand. This tool prevents your active chat window from hitting token limits by compressing older parts of the dialogue into a brief overview. In addition to that, the team relocated skill management to the settings UI, improving how the application communicates errors regarding those skills, and updated the OpenCode model roster to support DeepSeek V4 Flash, MiniMax M3, Qwen 3.7 Plus, and Nemotron 3 Ultra Free. External agent users can also monitor context window cost metrics and delete individual sessions directly from their history. Right-clicking ref labels in the git graph now opens a context menu that runs different actions against selected targets, kind of how VS Code does it. Here are some of the bug fixes this new release brings: The active agent fails to auto-select when creating a new git worktree. A scrollbar unexpectedly appears on wrapped code blocks in the agent chat. Collapse indicators for project headers appear when performing sidebar searches. Bracketed ellipsis title prefixes fail to show the ellipsis icon properly. Project icons render incorrectly in the recent projects picker. Diff hunk controls appear inside non-editable commit view multibuffers. The software update button hangs indefinitely on the downloading stage. Restoring an agent terminal in a remote project triggers a sudden crash. Splitting a pane that contains an active commit view causes a crash. Linux Wayland freezes when trying to read the clipboard from laggy external apps. Zed is a "newish" code editor trying to break the massive stronghold VS Code has on the developer community. Funny enough, the editor was created by former GitHub employees who worked on the Atom text editor (which Microsoft killed in 2022, several years after it bought GitHub). The project officially hit version 1.0 back in April, introducing platform parity for Windows and Linux alongside deep support for DeepSeek-V4-Pro.
    • 26H2 absolutely will support ARM Windows just not on devices that came with 26H1. This is evident by the fact I am running 26H2, which on my MacBook Neo and Surface Pro 12 (inch), within a VM.
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      78
    4. 4
      Steven P.
      72
    5. 5
      Michael Scrip
      71
  • Tell a friend

    Love Neowin? Tell a friend!