Recommended Posts

These don't exactly follow the definition of cheap, but they are really really nice cases.

I have the Octavo and it's great. It protects it all-around, and also disguises it as a book.

http://www.padandqui...s-for-ipad.html

That is not that bad. I do like it disguising it as a book. Less likely to get stolen when carrying it.

Link to comment
https://www.neowin.net/forum/topic/1066980-ipad-case/#findComment-594766408
Share on other sites

I would not recommend the smart cover. It collects dust and grease from you hand and will transfer it to the screen. Resulting in having to clean it every open.

Personally I have the Targus Slim, there are currently issues with the Sleep Wake Magnet not working, but from what if read on MacRumors forums, that's a vast majority of iPad3 cases.

For my iPad1 I had the regular apple case

Link to comment
https://www.neowin.net/forum/topic/1066980-ipad-case/#findComment-594766680
Share on other sites

I'm pretty opinionated when it comes to cases, and have given it a lot of thought.

My favorite case are these Neoprene slipcases like this one from CaseCrown: http://www.amazon.com/CaseCrown-Vertical-Neoprene-Apple-Model/dp/B004QJHNJW

At $12, it is hard to beat them at price. The iPad slides in and out w/o any problem, and I like how you can fold the top flap in to make the iPad even more accessible. It also makes an excellent surface to set my iPad on top of so that the back doesn't get scratched.

I really dislike the smart cover. In fact, I blame the smart cover for the scratch you see in my Avatar (from my iPad 2 taken last year..its a nasty scratch in the top left corner). The problem with the smart cover is that it doesn't provide any real padding, and when you unfold it to use it as a stand the surface that touches the screen is exposed to pick up any dust/sand/dirt on other surfaces. Once a piece of sand or something gets in there, the smart cover is in close contact with the glass while having very little padding and the sand will just fester until a scratch is formed.

I like how the smart cover comes off so easily, but I don't think it does the job at protecting the screen one bit.

Most other cases I have a similar low opinion of. The problem with cases is that they enclose the device in spots and any grime that gets between the case and the iPad will no doubt result in scratches.

If you want to keep your iPad looking new I recommend only using a slip cover and just don't ever drop it (ever). That way all the surfaces of the device can "breath" so any dirt or grim is not trapped in one spot left to fester.

Also, with the additional heat that the new iPad produces, the device needs to breath properly to transfer the heat away from the device properly.

Link to comment
https://www.neowin.net/forum/topic/1066980-ipad-case/#findComment-594766690
Share on other sites

Thanks everyone I will look more into the Neoprene slipcases.

I think I found the perfect $30 iPad case. Has instant on and instant off too which is a nice touch. Allows me to stand the iPad at any angle I want as well.

If you would let us know what you get and what you think of it once you've used it for some time, I'm sure everyone would be appreciative (Y).

Link to comment
https://www.neowin.net/forum/topic/1066980-ipad-case/#findComment-594768024
Share on other sites

  • 3 weeks later...
  • 1 month later...
  • 1 month later...

Hi, I picked up an iPad 3 recently and picked up this case. http://www.amazon.com/gp/product/B004R7A9NU/ref=oh_details_o02_s00_i00

It works very well. The magnets for sleep work, and the camera hole lines up perfectly on the new iPad despite it says it being for the iPad 1/2. It provides nice protection for the screen and provides the same stand functionality the smart cover does. It's also not too expensive.

Although I don't have any other cases to compare it to, I don't see myself replacing this one anytime soon.

Link to comment
https://www.neowin.net/forum/topic/1066980-ipad-case/#findComment-594952713
Share on other sites

  • 2 months later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!