VGA vs. DVI/HDMI

By MariosX
in Hardware Hangout

 Share

Recommended Posts

Grand Master

+Fahim S. MVC

Posted
  • MVC
Posted

High end monitors seldom use VGA instead of HDMI/DVI. They do include a VGA port in addition to the HDMI/DVI/DP port(s) probably for legacy compatibility.

DVI/HDMI/DP supports higher resolution and more accurate colour representation because of the increased bandwidth and the digital signal (meaning that two sets of conversion are taken out of the overall chain) as well as supporting copy protection technologies such as HDCP and the like.

Grand Master

PGHammer

Posted
Posted

Hello.

I've been wondering why all monitors today (including high end) still use VGA port over DVI or HDMI ports.

Is VGA superior? what are differences between VGA and DVI or HDMi?

I still prefer even flat-panels (for computer use) with all three inputs - I bought my Acer H233H.bmid for precisely that reason in 2009.

I basically use it as a *poor tech's* KVM switch, because I can connect the single display to up to three PCs - at once.

HDMI is a plus for computers for the same reason it's been a plus for home video (especially HD) - the single cable carries both audio and video. However, it has obsolesced both sound cards and integrated/onboard audio to a large extent if your display has built-in speakers, due to the PC using HDMI audio by default if connected via HDMI - even as far back as Windows XP, never mind Vista, 7, or the Developer or Consumer Previews of Windows 8 or OS X back to Snow Leopard..

The disadvantage? Not really HDMI's fault - I've noticed that HDMI - unlike DVI or VGA - doesn't display edge-to-edge, despite the same resolution being used. Because it's not applicable to all monitors, I can't blame it on the HDMI specification.

DVI has been around far longer than HDMI - even on PCs. The widely-acknowledged debut of DVI for PCs came with ATI Technologies' All-In-Wonder 8500DV supporting DVI as *standard* - you needed an included dongle to connect to CRTs (which were still the standard PC display). DVI has an even longer history on Macs - DVI was, in fact, one of two *standard* display connectors for G3 and G4 Power Macs (the other being, naturally, the AUI port).

VGA is the moldy-oldie of standard display connections for computers (it's still supported by some flat-panel displays and even some HDTVs today, in addition to HDMI and/or DVI). However, the big reason it is still supported as an *input* is when the source supports neither DVI or HDMI.

However, why are both VGA and DVI in trouble? Margins are thin on displays - and getting thinner. Including multiple inputs - let alone all the cables to connect to those inputs - was uncommon on low-end displays in 2009; in 2009, Acer was unique among sub-$200USD FP displays in supporting all three inputs *and* including the cables for them all. Most of Acer's competition has already discarded VGA/D-sub in favor of DisplayPort when they offer an input option other than DVI or HDMI - however most offer *just* DVI and HDMI in their sub-$200USD displays, and don't include both cables. (Usually, it's the HDMI cable that is missing.)

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Threads scales past half a billion users, brings deeper community and feed controls

      By neufuse · Posted

      lots of people us facebook for stuff, threads though no
    • Microsoft announces 12th-gen Surface Pro with Snapdragon X2 processors

      By monterxz · Posted

      Can you read? I've said I'm willing to pay more for a notchless (no notch) 3:2 screen.
    • Microsoft unveils new Surface Laptop with improved trackpad, Snapdragon X2, and more

      By FunkyMike · Posted

      Not even an OLED display on the laptops. Also it seems that the laptop design isn't the same as the Surface Ultra model. Looks like bargain bin at high prices.
    • Microsoft announces 12th-gen Surface Pro with Snapdragon X2 processors

      By tsupersonic · Posted

      make your own notch - it's not that hard
    • VirtualBox 7.2.10

      By Copernic · Posted

      VirtualBox 7.2.10 by Razvan Serea VirtualBox is a powerful x86 and AMD64/Intel64 virtualization product for enterprise as well as home use. Targeted at server, desktop and embedded use, it is now the only professional-quality virtualization solution that is also Open Source Software. Presently, VirtualBox runs on Windows, Linux, macOS, and Solaris hosts and supports a large number of guest operating systems including but not limited to Windows (NT 4.0, 2000, XP, Server 2003, Vista, 7, 8, Windows 10 and Windows 11), DOS/Windows 3.x, Linux (2.4, 2.6, 3.x, 4.x, 5.x and 6.x), Solaris and OpenSolaris, OS/2, OpenBSD, NetBSD and FreeBSD. Some of the features of VirtualBox are: Modularity. VirtualBox has an extremely modular design with well-defined internal programming interfaces and a client/server design. This makes it easy to control it from several interfaces at once: for example, you can start a virtual machine in a typical virtual machine GUI and then control that machine from the command line, or possibly remotely. VirtualBox also comes with a full Software Development Kit: even though it is Open Source Software, you don't have to hack the source to write a new interface for VirtualBox. Virtual machine descriptions in XML. The configuration settings of virtual machines are stored entirely in XML and are independent of the local machines. Virtual machine definitions can therefore easily be ported to other computers. VirtualBox 7.2.10 changelog: VMM: Fixed issue when CentOS 10 VM was not booting due to the message "Fatal glibc error: CPU does not support x86-64-v3" (​github:gh-642) Devices/EFI: Fixed booting issue when ARM VM had less than 1024 MiB of RAM assigned (​github:gh-679) USB: Fixed issue when it was not possible to attach USB device to headless VM on Apple Silicon/macOS 26.4.1 (​github:gh-631) Storage: Fixed issue when VIRTIO-SCSI device was not recognized as SSD device by guest system (​github:gh-634) Network: Fixed issue in E1000 emulation code which triggered debug log creation (​github:gh-645) Network: Fixed issue in E1000 emulation code which prevented OS/2 guest from booting (​github:gh-683) Linux Host: Fixed issue when VMs could not be started due to kernel oops (​github:gh-639) Linux Host and Guest: Fixed issue when kernel modules were failing to build with openSUSE 16.0 kernel Linux Host and Guest: Added initial support for kernel 7.1 Linux Host and Guest: Added extra fixes for RHEL 9.8 kernel (​github:gh-676) Linux Host and Guest: Added possibility to build source code using NASM instead of YASM as the assembler (​github:gh-520) Linux Guest Additions: Added initial support for Extended Data Control Protocol for clipboard sharing with Plasma on Wayland guests (​github:gh-33) Linux Guest Additions: Added extra fixes for preventing vboxvideo kernel module build with kernel version 7.0 and newer (​github:gh-655) OS/2 Guest Additions: Fixed issue when Shared Folders automount and clipboard sharing stopped working (​github:gh-551) Download: VirtualBox 7.2.10 | 170.0 MB (Open Source) Download: VirtualBox 7.2.10 Extension Pack | 19.1 MB View: VirtualBox Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware

  • Recent Achievements

    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
    • First Post
      Dys Topia earned a badge
      First Post

  • Popular Contributors

    1. 1
      +primortal
      510
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      100
    4. 4
      Steven P.
      87
    5. 5
      ATLien_0
      70
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!