- 0
Help integrating php/mysql with existing html page.
-
Recently Browsing 0 members
- No registered users viewing this page.
-
Posts
-
By zikalify · Posted
Waymo recalls self-driving software after cars enter closed freeway work zones by Paul Hill Waymo, the self-driving car maker owned by Alphabet – the parent company of Google –, has recalled some of its fifth-generation Automated Driving Systems (ADS). It did so after some of its cars drove through closed construction zones. According to the National Highway Traffic Safety Administration (NHTSA), the affected vehicles were capable of driving through a closed freeway construction zone and continuing to drive at speed. The listing on the NHTSA website says that Waymo is currently developing a solution to fix this issue, but in the meantime, freeway driving is being restricted. Waymo will update its ADS software so that vehicles can detect when they can avoid entering construction zones. According to the Safety Recall Report, on April 20, 2026, Waymo’s Field Safety Committee began meetings reviewing an event from April 11, 2026, and five events from April 19, 2026, where Waymo’s autonomous vehicles didn’t recognize and drove past ramp closure signs into the pre-planned freeway construction zones. This took place in Phoenix, Arizona. Separately, on May 18, 2026, seven Waymo vehicles entered freeway lanes with active construction in the San Francisco Bay Area by driving between cones that were placed to show the lane was closed. On the back of both of these events, Waymo restricted freeway driving until it could address the issue. In June, Waymo’s Safety Board reviewed the issue and additional information related to ADS performances around construction zones; then, as a result, it decided to conduct a recall. This development is not good for Waymo as it adds to a growing list of technical hiccups its cars have experienced. Ultimately, it will lead to more scrutiny from lawmakers around the world who will be more cautious about letting autonomous vehicles on their roads without tighter regulation. For readers in areas where Waymo operates, does this news make you more wary about stepping into one of these vehicles? -
By snowy owl · Posted
I'm still on Windows 10 22H2 because I didn't want to deal with all the issues in Windows 11, so I waited almost a week before installing the latest Patch Tuesday update (KB5094127), I went ahead and did it, and it was a huge mistake—ever since then, my File Explorer has seen a performance drop of about 30% when transferring large files... Once again, Microsoft has outdone itself! This update cannot be uninstalled, either through the Control Panel (via Settings) or by accessing Advanced Startup Options. The only possible alternative would be to use system restore points, but I’d have to reinstall all app and driver updates (and there’s no guarantee it would work). Or there’s the “nuclear option” of a in-place repair without losing files or apps, but even then, all my customizations would be lost! Microsoft just can’t help but mess everything up! Way to go, Microsoft! But I still don’t want your c****y Windows 11! -
By hellowalkman · Posted
Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs by Sayan Sen While Microsoft has been trying to improve it, Windows 11 is definitely not flawless, as even today some issues are taking a year to publicly acknowledge. However, one area of trouble that may finally see much better results soon is graphics driver crashes. Work on graphics driver timeouts, also called Timeout and Detection Recovery (TDR), is not new as the latest WDDM 3.2 also has specific improvements regarding it. Windows Display Driver Model (WDDM) version 3.2 is supported on Windows 11 24H2 and 25H2. However, with the upcoming version 26H2, TDR crash diagnosis could go to the next level as Microsoft is introducing a new DirectX 12 API feature called "DirectX Dump Files". Similar to how system memory dump files work when a system crashes or freezes or encounters any such major issue, DirectX Dump Files (DDF) will essentially record a snapshot of the GPU execution right at the moment a graphics-related crash or hang or freeze occurs, so that developers can better understand and diagnoze these TDR and timeout detection errors. The dump will be available as a .dxdmp file for analysis and it will be a comprehensive dump file generated with detailed insights about the hardware, drivers, Windows, as well as the affected application. This should be another welcome change in this department. Earlier at GDC 2026, when the technology was first debuted, Microsoft had shared more details regarding it. The company had explained how DDF is designed to gather data from every layer of the graphics stack into a single file, eliminating the need for developers to manually correlate logs from multiple tools. As mentioned above, the dump can contain a lot of useful details like GPU hardware state information such as register values, shader program counters, page fault virtual addresses, shader memory data, and command buffers. Alongside that, it also captures DirectX runtime and kernel information, including D3D objects, pipeline state objects, device error data, adapter details, and CPU call stacks. Microsoft says the feature has been built around two primary use cases: retail device removals and local device removals. The former allows developers to collect crash information from end users' systems in the field, while the latter helps QA teams and developers investigate issues on test machines. Developers will also be able to include up to 2 MB of custom application data through new D3D12 APIs, providing additional context for troubleshooting. In addition, Microsoft is introducing three dump collection modes ranging from zero-overhead capture, which has no runtime performance impact on supported hardware, to higher-detail modes that collect more vendor-specific debugging data. On compatible Tier 2 hardware, zero-overhead dumps will be enabled by default, meaning developers may begin receiving useful crash diagnostics without making any code changes. The table below explains the three tiers: Tier Description NO_OVERHEAD Enables crash capture with no runtime cost and is suitable for broad deployment MEDIUM_OVERHEAD Provides a balance, capturing additional diagnostic data with moderate impact HIGH_OVERHEAD Collects the most detailed GPU and driver state available, enabling deeper investigation at the cost of higher runtime overhead In terms of availability, the company expects broader release to be around the fall of 2026, which should be right around the time when Windows 11 version 26H2 lands. Right now, DirectX Dump Files are available as a preview and currently, only AMD has the compatible AgilitySDK Developer Preview driver version 26.10.07.02. You can find the official announcement post here on Microsoft's website. -
By Malisk · Posted
And with SO much better perf than the laggy mess that is Files. -
-
-
Recent Achievements
-
Sharbel earned a badge
One Month Later
-
BizSAR earned a badge
First Post
-
Jordan Smith earned a badge
Week One Done
-
BizSAR earned a badge
Reacting Well
-
AndreaB earned a badge
First Post
-
-
Popular Contributors
-
Tell a friend
Question
Brodel
<p>Hello, I know little about web design so I hope this makes sense.
I am trying to integrate a very basic php site into an existing html website to create a blog. I have one page where I can enter info which is then published onto a page called blogentries.php which works fine on it's own. I want the info to be published into the blogentries div on my website that says "I WANT BLOG ENTRIES HERE" close to the bottom.
I thought it would be a simple case of making the connection to the database in the header and put the rest of the php into the div, but obviously there is more to it than that.
I was wondering if someone could look at the code for the two pages and explain how it should be done?
Thank you
blogentries.php
[b]blogpage in html[/b]
<!doctype html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>AJWatson - Blog</title>
<meta name="keywords" content=" art design, digital media design, graphic design, logo design, ">
<link rel="shortcut icon" href="favicon.ico" />
<!-- Load CSS -->
<link href="css/style.css" rel="stylesheet" type="text/css" />
<!-- Load Fonts -->
<link rel="stylesheet" href="http://fonts.googleapis.com/css?family=Droid+Serif:regular,italic,bold,bolditalic" type="text/css" />
<link rel="stylesheet" href="http://fonts.googleapis.com/css?family=Droid+Sans:regular,bold" type="text/css" />
</head>
<body>
<!--This is the START of the header-->
<div id="topcontrol" style="position: fixed; bottom: 5px; left: 960px; opacity: 1; cursor: pointer;" title="Go to Top"></div>
<div id="header-wrapper">
<div id="header">
<div id="logo"><a href="index.html"><img src="images/logo.png" width="100" height="80" alt="logo" /></a></div>
<div id="header-text">
<h4>Blog</h4>
<h6><a href="index.html">Home</a> ? Blog</h6>
</div>
</div>
</div>
<!--END of header-->
<!--This is the START of the menu-->
<div id="menu-wrapper">
<div id="main-menu">
<ul>
<li><a href="index.html">Home</a></li>
<li><a href="about.html">About</a></li>
<li><a href="portfolio.html">Portfolio</a></li>
<li><a class="selected" href="blog.html">Blog</a></li>
<li><a href="contact.html">Contact</a></li>
</ul>
</div>
<!--This is the START of the footer-->
<div id="footer">
<div id="social-box">
<ul>
<li>
<div class="facebook"><a href=""></a></div>
</li>
<li>
<div class="twitter"><a href=""></a></div>
</li>
<li>
<div class="linkedin"><a href=""></a></div>
</li>
</ul>
</div>
<h6></h6>
</div>
<!--END of footer-->
</div>
<!--END of menu-->
<!--This is the START of the content-->
<div id="content">
<!--This is the START of the blog-->
<div id="blogentries">
I WANT BLOG ENTRIES HERE
</div>
<!--END of blog-->
</div>
<!--END of content-->
</div>
</body>
</html>
[/CODE]
Link to comment
https://www.neowin.net/forum/topic/1069116-help-integrating-phpmysql-with-existing-html-page/Share on other sites
37 answers to this question
Recommended Posts