Recommended Posts

What's up lads! I've finally decided to buy a new car, had enough of old bangers, I was on a trip to PA about 3hrs drive wih my wife and our baby girl, and about 30 minutes before we reached our desired destionation the two flex pipes on my Audi A6 1999 quattro broke. The car sounded like a jet with an unberable noise especially for our young baby, luckly we weren't far away from our destination. The point is, this car has given me nothing but problems, so I can't risk buying another used banger. I've done my research and I have come up with this car;

I want you guys to give me an honest opinion, i have read a lot of good things about this car.

2012 Mazda3 SkyActiv

What you guys think

Link to comment
https://www.neowin.net/forum/topic/1077099-buying-a-new-car/
Share on other sites

If it ticks all the boxes for you and the reviews are good then I say go for it :) There's a lot to be said for having something brand new and backed by the manufacturers warranty! And Japanese cars have great reliability records.

If that is what you want go for it then. I would go out and drive other cars as well, maybe the toytoa corolla s, nissan sentra sr, honda civic si, the hyandai and kia versions whaterver they are, etc. Then make your decision on looks, handling, power, gas milege, reviews. It may look good on paper but you may not like the way it feels on the road compared to another car. but if you are going specifically by numbers, the mazda 3 is nice and I believe the quality has gone up from the early 00's and 90's.

I would say to look at a new Hyundai Elantra. I have two friends, one with 2012 Elantra and one with a 2012 Mazda 3 both have driven each others cars and both liked the Elantra much better, the only thing I seen that was trully better was the steering in the Mazda 3 and the sound system in the Mazda 3. Otherwise the Elantra was much better with everything else, plus Hyundai has a better warranty.

the mazda 3 is nice and I believe the quality has gone up from the early 00's and 90's.

Were Mazda's bad back then? They've been making reliable cars (outside of the rotary engines) for a long time.

Nothing wrong with the Mazda 3. I'd check out the Ford Focus and the Subaru Impreza as well, they're all similar. They're a bit small though, if there's any plans for a second kid.

I have the corrola 2012 le ... spacious , outstanding on gas, airbags all over the place comfy and has just about all oyu need ...

if I had the money I would go for the VW Golf TDI .... hondas were great but lost interest with the 2010-2011 models have no idea about 2012

nissans don't like them that mush, hyundais look good, though again not my cup of tea

Were Mazda's bad back then? They've been making reliable cars (outside of the rotary engines) for a long time.

Nothing wrong with the Mazda 3. I'd check out the Ford Focus and the Subaru Impreza as well, they're all similar. They're a bit small though, if there's any plans for a second kid.

this is from 2005....this is the mazda 6 though. There are more but this can get you started from people who actually own the cars.

http://forum.mazda6c...your-mazda.html

Looked at the car, it looks good man ... take a few cars for a test drive ... including bmw/merc, even if you don't buy them .... you can compare things better (even if you end up buying the mazda) ..... never the less, good choice if you decide to get it ...

also, food for thought ... oil change at 5000mi, another at 10000 and then another at 18000 (thereafter change as recommended)

this is for the breakin as first 5000mi baby the car no sudden stops/acceleration , no more than 100km./h no highway driving , also, don't keep speed constant

this is from 2005....this is the mazda 6 though. There are more but this can get you started from people who actually own the cars.

http://forum.mazda6c...your-mazda.html

People on the internet complain about everything. For it's price range, I doubt it gets any major complaints. I've never heard strong complaints in any of the car magazines, unlike some of the cheap-premium brands like Mini.

I bought a new car once, worst decision I ever made. Unless you enjoy being ripped off you should buy a used one a year or two old at least, it doesn't have to be an old banger. You spend tens of thousands of dollars on a new car, drive it off the lot it becomes a used car and suddenly half it's value is already gone. Seriously, new cars are for suckers. :)

then you are doing it wrong.

I bought a new car in 2010, it was a 2010 nissan altima 3.5 sr loaded to the gils minus the nav (rear view cam, bose premium system, sat radio, heated leather, power everything, etc. Sticker was 30,300, my price was 27,300 (it was less than dealer invoice, and it was still less than sticker after tax and tags). 1yr to 2yr Used with same options was 22000-23,500 and that is with 30,000 miles. So I paid roughly 4000-5000 more than used and got it with 0 miles.

You don't know how to car shop.

I'd say go for it, 40 mpg highway is nice to have (manual transmission). If its anything like my 2008 Speed3, it should be fairly reliable. My Speed3 is on 108,000 miles and going strong, no major issues, however the following issues did come up:

- thermostat replacement @ 33k

- 1st rear shock replacement @ 45k (I killed it probably by hitting a curb)

- 2nd rear shock just went @ 108k

I've done all the regular maintenance recommend in the manual. Now my friend has a 2007 2.3 Mazda 3 automatic, and he is horrible at doing maintenance (10k to 12k on a single oil change for instance), and the only things he had go were his front shocks. I think he's on like 70k to 80k miles on it, he also beats the crap out of it!

My dad has a 2008 2.3, and his thermostat also went at around 20k miles. (Same issue as mine, it would not close all the way).

Its not just the internet. People complain to complain. What rock have you been hiding under.

If you read through it is not just complaints.

I read them, I didn't see anything on there that you wouldn't hear for any other car in that price range. And my point about complaints was, you'll see 10x as many complainers online as you will people praising a product. It's not a great way to do research, you really want to see what a long term test from a reputable reviewer has to say.

I bought a new car once, worst decision I ever made. Unless you enjoy being ripped off you should buy a used one a year or two old at least, it doesn't have to be an old banger. You spend tens of thousands of dollars on a new car, drive it off the lot it becomes a used car and suddenly half it's value is already gone. Seriously, new cars are for suckers. :)

You can get a better deal on a new car than a 1 or 2 year old car. If you're taking out a loan, new car loans are almost always better than used car loans (especially if you can find ones for 0%). Also, assuming you're not trading the car in every 3 years, by the time you go to sell, the difference between the cars would be negligible.

Actually, you need to know this on a second thought

Mazdas are prone to Oxygen (O2) sensor failure, also, the black plastic cover by the window is glued, and will peel .... (someone with a Mazda please confirm ... The mazda on my diveway has this ... including some A/C problems)

**** with a new car I got a fairly decent deal too ... from 24k (tax extra) got it at 22k (tax in) --- 0% financing alsmot fully loaded (no nav or audio -- though it has 6 speakers)

If it ticks all the boxes for you and the reviews are good then I say go for it :) There's a lot to be said for having something brand new and backed by the manufacturers warranty! And Japanese cars have great reliability records.

Its not only the online reviews that i have taken into account, but i know at least 3 people who have Mazda 3's, not the 2012 one but 2010/2011, and they are extremely happy.

If that is what you want go for it then. I would go out and drive other cars as well, maybe the toytoa corolla s, nissan sentra sr, honda civic si, the hyandai and kia versions whaterver they are, etc. Then make your decision on looks, handling, power, gas milege, reviews. It may look good on paper but you may not like the way it feels on the road compared to another car. but if you are going specifically by numbers, the mazda 3 is nice and I believe the quality has gone up from the early 00's and 90's.

I've test driven both Mazda 3 i Sport and Honda Civic si and to be frank with you the Honda Civic seems to have one big problem, and that is "Road Noise". If your doing 60mph or more the road noise does really bother you unless you put the radio on loud. Also on Honda the susspension seems to be extremely low.

From my testing experience Mazda handles things way better, but the cabin is quite tiny winy me.

I bought a new car once, worst decision I ever made. Unless you enjoy being ripped off you should buy a used one a year or two old at least, it doesn't have to be an old banger. You spend tens of thousands of dollars on a new car, drive it off the lot it becomes a used car and suddenly half it's value is already gone. Seriously, new cars are for suckers. :)

Well, its obvious that when you buy something, not just a car but anything your definitely on the loosing side, whether its a used car or new. If i wasn't going to use it on daily basis then i wouldn't probably go for brand new car, but I'm a family man and i had enough problems with old cars.

Looked at the car, it looks good man ... take a few cars for a test drive ... including bmw/merc, even if you don't buy them .... you can compare things better (even if you end up buying the mazda) ..... never the less, good choice if you decide to get it ...

also, food for thought ... oil change at 5000mi, another at 10000 and then another at 18000 (thereafter change as recommended)

this is for the breakin as first 5000mi baby the car no sudden stops/acceleration , no more than 100km./h no highway driving , also, don't keep speed constant

Thanks for the tip, I'm extremely organized with maintenance.

I would say to look at a new Hyundai Elantra. I have two friends, one with 2012 Elantra and one with a 2012 Mazda 3 both have driven each others cars and both liked the Elantra much better, the only thing I seen that was trully better was the steering in the Mazda 3 and the sound system in the Mazda 3. Otherwise the Elantra was much better with everything else, plus Hyundai has a better warranty.

That this another car i have in mind too, i haven't had the chance to test drive it but i did read quite a lot of it.

I've test driven both Mazda 3 i Sport and Honda Civic si and to be frank with you the Honda Civic seems to have one big problem, and that is "Road Noise". If your doing 60mph or more the road noise does really bother you unless you put the radio on loud. Also on Honda the susspension seems to be extremely low.

From my testing experience Mazda handles things way better, but the cabin is quite tiny winy me.

The road noise is probably due to cheapo tires. That could be remedied by getting better rated tires, but that's a pretty lame cost to have to incur to fix the problem. I test drove a Civic a few months back and wasn't impressed. It had a cheap plasticy interior on the same lines as a Hyundai. The model with GPS was better, but the one without had a million buttons starring you in the face, and the two tiers of display panels was odd.

The Mazda3 looks much better, imo. Just for comparison sake, you could test drive a Subaru Impreza, just for kicks.

I think the Impreza is a bit more expensive, so the Mazda3 looks to be a nice choice at that price point.

Actually, you need to know this on a second thought

Mazdas are prone to Oxygen (O2) sensor failure, also, the black plastic cover by the window is glued, and will peel .... (someone with a Mazda please confirm ... The mazda on my diveway has this ... including some A/C problems)

**** with a new car I got a fairly decent deal too ... from 24k (tax extra) got it at 22k (tax in) --- 0% financing alsmot fully loaded (no nav or audio -- though it has 6 speakers)

Those problems sound quite serious at that early age of the car, has it been known in masses?

My interior is holding up fairly well, I have a slight rattle coming from the glove compartment, and my drivers seat creaks slightly :/

Haven't you taken it to the mechanic and what year is your car?

The road noise is probably due to cheapo tires. That could be remedied by getting better rated tires, but that's a pretty lame cost to have to incur to fix the problem. I test drove a Civic a few months back and wasn't impressed. It had a cheap plasticy interior on the same lines as a Hyundai. The model with GPS was better, but the one without had a million buttons starring you in the face, and the two tiers of display panels was odd.

The Mazda3 looks much better, imo. Just for comparison sake, you could test drive a Subaru Impreza, just for kicks.

I think the Impreza is a bit more expensive, so the Mazda3 looks to be a nice choice at that price point.

It might be the cheap tires but i have heard quite a lot of people resulting in the same thing, and the problem is apparently the cheap body material used to manufacture, i hope im wrong its just what i heard. As for the buttons i agree, its just way too many things it would confuse anyone man.

My budget is 20k can't afford to go any higher

It might be the cheap tires but i have heard quite a lo fo people resulting in the same thing, and problem is apparently cheap body material used to manufacture, i hope im wrong its just what i heard. As for the buttons i agree, its just way too many things it would confuse anyone man.

My budget is 20k can't afford to go any higher

Yup, at $20k, the Mazda3 would be a good fit.

You could also look at the Camry SE. It has a nice sporty exterior and Camrys are usually a nice ride. I think MSRP is around $22-23k, so there should be some room to get under the $20k level. It's definitely a bigger car, but might be worth at least looking at.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      222
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!