So annoyed second RMA biostar Z77 board.....


Recommended Posts

The first one had an endless boot and i noticed the ram chip got burnt a bit. The second was working great for 2 days I decided to do a bios update and during the middle of the computer rebooted for no reason and corrupted the bios..... I called up biostar and they would never send me a new bios chip without sending in the whole board..... :(

The second was working great for 2 days I decided to do a bios update and during the middle of the computer rebooted for no reason and corrupted the bios..... I called up biostar and they would never send me a new bios chip without sending in the whole board..... :(

The parts I've bolded are what boggles me - if the system was working, why on earth would you update the BIOS? BIOS updates should only ever be done if you are experiencing problems and there is a chance (or documented note in the changelog) that they've addressed the issue you are having. Rarely they should be done for performance improvements, but those generally are a result of fixing a problem.

The parts I've bolded are what boggles me - if the system was working, why on earth would you update the BIOS? BIOS updates should only ever be done if you are experiencing problems and there is a chance (or documented note in the changelog) that they've addressed the issue you are having. Rarely they should be done for performance improvements, but those generally are a result of fixing a problem.

Always updated the bios on my computers when I build them :shrug:

The first one had an endless boot and i noticed the ram chip got burnt a bit. The second was working great for 2 days I decided to do a bios update and during the middle of the computer rebooted for no reason and corrupted the bios..... I called up biostar and they would never send me a new bios chip without sending in the whole board..... :(

Sounds like what MSI did to me too, except they did send me a BIOS chip and it did fix the problem, but not before I bought an Asus and I swore I would never buy a MSI board again for the same reason you are swearing off Biostar

The parts I've bolded are what boggles me - if the system was working, why on earth would you update the BIOS? BIOS updates should only ever be done if you are experiencing problems and there is a chance (or documented note in the changelog) that they've addressed the issue you are having. Rarely they should be done for performance improvements, but those generally are a result of fixing a problem.

Because they generally add new features or improvements like bug fixes, etc. Like my netbook, there were complaints that it wouldn't accept 8GB of RAM (wouldn't post), even though the chipset supported it. A BIOS update was released to fix the issue. I've never had a bad flash...

Because they generally add new features or improvements like bug fixes, etc. Like my netbook, there were complaints that it wouldn't accept 8GB of RAM (wouldn't post), even though the chipset supported it. A BIOS update was released to fix the issue. I've never had a bad flash...

I learned one important lesson dealing with BIOS updates, Never ever use a windows based program to flash the BIOS, regardless of how tempting in might seem (bad experience with MSI)

Because they generally add new features or improvements like bug fixes, etc. Like my netbook, there were complaints that it wouldn't accept 8GB of RAM (wouldn't post), even though the chipset supported it. A BIOS update was released to fix the issue. I've never had a bad flash...

Yes, they will fix bugs, but that's not my point - my point is that if your system is not exhibiting any problems, why bother? There's too much risk involved for too little reward for a perfectly functioning system.

For example, your netbook won't accept 8GB of RAM - if you're only running 4GB and aren't planning to upgrade, the fix is useless to you, so why tempt fate?

Luckily the board I just purchased allows a bios update without a CPU or Memory installed. Felt weird doing it that way.

Asus Sabertooth x79 is my board of choice

Umm out of idle curiosity, how does that work? :omg:

  • Like 1

Yes, they will fix bugs, but that's not my point - my point is that if your system is not exhibiting any problems, why bother? There's too much risk involved for too little reward for a perfectly functioning system.

For example, your netbook won't accept 8GB of RAM - if you're only running 4GB and aren't planning to upgrade, the fix is useless to you, so why tempt fate?

If you cant update your bios without a promise that your board should still work then it is not a company I want to buy from x

Bios updates should only be done if the update directly addresses the problem(s) you are experiencing. A bad Bios flash can render a Mobo useless. Rule of thumb for the Bios- If it's not broken doesn?t fix it.

I dont think it was figuring out my clock speed correctly on its own and I figured a bios update would fix it

If you cant update your bios without a promise that your board should still work then it is not a company I want to buy from x

While in theory I agree with you - the problem is that BIOS is just software, and software is written by people who are prone to making mistakes.

Unfortunately, the BIOS is loaded into firmware at the lowest level of operation of your computer - it's not like installing buggy software in Windows where you might get random program crashes but in all other respects it still works - when your BIOS is buggy, best case scenario is a functioning computer with lowered performance - worst case is a non-functioning computer (that is also potentially unrecoverable).

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Very fitting name since AI users have air where there brains should be.
    • Yes, it was amusing at the time because even then dbrand was well known for stealing the designs of products from other companies. That’s what they do.
    • Didn’t Dbrand once complain that Casetify was ripping off their designs a well? seems pretty bad of them to try and get around Valve’s copyright this way with that in mind.
    • Dbrand thought they could get away with this Steam Machine case, Valve disagreed by David Uzondu Image via Dbrand Dbrand has cancelled its highly anticipated Companion Cube enclosure for the Valve Steam Machine, which it teased back in November of last year with a concept render and sign-up page, because it did not ask Valve for permission first before manufacturing the case. According to Dbrand, it took the "backwards approach" of building the product first before asking for permission from the copyright holder. Seven months of work went into the project, requiring over a thousand engineering hours from the design team. Workers developed forty-four sets of injection molding tools, making a unique mold for each sub-component of the crate. When the Companion Cube went live on Monday last week, it, according to Dbrand, quickly became the second-fastest-selling product in the company's fifteen-year history, racking up orders for hundreds of thousands of units. Customers eagerly bought the $129.95 deluxe edition or the bare-bones $99.95 version, which the manufacturer cheekily branded as the "Poverty Cube". It was around this time that the legal eagles at Valve descended on the accessory maker with a formal demand. The developer pointed out that the iconic block design remains protected intellectual property from the game Portal, so unlicensed sales had to stop. Dbrand said that all its pleas to salvage the project with the Valve team, including proposals to run a properly licensed release under official terms "with their blessing", fell on deaf ears, so it had no choice but to obey and remove every trace of the product from the internet. If you bought the enclosure, the company said that banks will process your refund by the end of this week, but if it still hasn't arrived in your account by then, you should not hesitate to contact support. The Steam Machine itself is a high-performance console that Valve designed directly to bring PC gaming into the living room. It was announced on 12th November 2025 (the same day Dbrand announced the Cube) and runs on the Linux-based SteamOS, the same OS that powers the Steam Deck. As for the price, due to the shortage of memory and storage chips, the hardware cost landed much higher than people were expecting, starting at $1,049 for the 512 model (without a controller) or $1,128 with the new gamepad. The premium 2 TB model pushes those prices even higher, selling at $1,349 for the standalone console and hitting $1,428 if you want the bundle.
  • Recent Achievements

    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      532
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      97
    5. 5
      macoman
      57
  • Tell a friend

    Love Neowin? Tell a friend!