Windows stops booting when new RAM is installed


Recommended Posts

Currently have 1x 4 GB chip.

Trying to install a second 4 GB chip.

Without the new RAM, it boots fine but with the new RAM (in different slots), Windows reboots when it says "Starting Windows" (the animation doesn't even appear).

It also reboots before Startup Repair or Safe mode get properly started.

PC boots fine if I take out the RAM.

The RAM is 100% compatible with the PC.

Any ideas?

EDIT: Tried taking out the older chip and only put the new one in. Same problems. Faulty RAM?

w/o further info, it's hard to diagnose. are the two sticks identical in specs? some motherboards require that the RAM be placed in certain slots. are they installed correctly? can you run the single, new stick w/o the old stick installed?

I actually had the similar behavior, and the fix was to actually uncheck 'automatic' from the RAM timing and set manually to the rated specs of the RAM. Took me FOREVER to figure that one out...

Also, if you remove your original RAM and use only the new RAM does it still boot? It seems you've only confirmed that it still boots correctly if you remove the new RAM.

w/o further info, it's hard to diagnose. are the two sticks identical in specs? some motherboards require that the RAM be placed in certain slots. are they installed correctly? can you run the single, new stick w/o the old stick installed?

As I said, the RAM is 100% compatible with the PC.

Only using the new chip causes the same problems.

I don't really see a need to even guess. Just take it back to where you bought it say it wouldn't boot when it was in. They should replace it without argument.

I bought it originally from Ebuyer. It didn't work (random BSODs after a few hours) so I RMA'd it to Corsair. This new chip is the RMA replacement chip and now the PC won't even boot :/

I bought it originally from Ebuyer. It didn't work (random BSODs after a few hours) so I RMA'd it to Corsair. This new chip is the RMA replacement chip and now the PC won't even boot :/

Okie doke, continue looking through the bios for the memory timing options then. :rofl:

Although there is still the outside chance that you're just unlucky and got 2 bad sticks in a row.

As I said, the RAM is 100% compatible with the PC.

Only using the new chip causes the same problems.

but you didnt answer my questions.

1. are the sticks identical in specs?

2. some motherboards require that the RAM be placed in certain slots. are they installed correctly?

3. can you run the single, new stick w/o the old stick installed?

Okie doke, continue looking through the bios for the memory timing options then. :rofl:

<snip>

Within Advanced, I see:

  • CPU Configuration
  • Chipset
  • Onboard Devices Configuration
  • USB Configuration
  • PCIPnP
  • Intel VT-d Configuration

but you didnt answer my questions.

1. are the sticks identical in specs?

2. some motherboards require that the RAM be placed in certain slots. are they installed correctly?

3. can you run the single, new stick w/o the old stick installed?

1. Yes. As I said, I know the RAM is fully compatible with the PC.

2. I've tried various slots.

3. Read my original post edit. The edit was made literally 10 seconds after I first made the topic.

Name both modules you are using.

And as said above - ensure RAM timing is set to auto.

If you don't know how to use it, then it should looks like this.

<image snipped>

As I've said, I see nothing like that in the BIOS. It's a very basic motherboard.

I see no way to adjust RAM timings and even if I could, I would never have touched them.

As others have asked, lets try this.

What is the make/model of the memory, what is the make/model of the system or motherboard?

Help us, help you...

It's a custom built PC. The motherboard information is in my signature, the Asus P7H55-M SI.

Both RAM chips are 4 GB DDR3-1333.

I've found out the hard way that mobo's are extremely sensitive on RAM. If you're using different brands, that could be causing problems. If you're using a brand and model not even listed by the moobo manufacturer that could be your cuplrit too. I built an i3 HTPC and had stability problems. A fellow Neowinian pointed out the list of compatible RAM with my mobo and I bought it and haven't had a single problem since. From now on when I build, I'm going to the mobo site and making sure I buy RAM listed as approved. That's the biggest lesson I've learned in years.

does this help you at all? i pulled this information about the BIOS from the motherboard's manual

post-34502-0-63999300-1343137523.jpg

The only BIOS screen I can find related to RAM is this one, and it's all set to Auto:

post-645-0-23761000-1343137709.jpg

I will try resetting the BIOS defaults in 30 minutes when I get home, although I can't see it helping unfortunately.

2. Set bios defaults

3. Memtest x86

I'm surprised this hadn't been suggested earlier. This is the first thing I do in case of a similar event.

Should memtest86+ return any errors, the customer service will replace the memory without blinking.

I've found out the hard way that mobo's are extremely sensitive on RAM. If you're using different brands, that could be causing problems. If you're using a brand and model not even listed by the moobo manufacturer that could be your cuplrit too.

Actually, I haven't found that to be the case at all. I have two pairs of memory installed, each with a different size, different brand, different speed rating and different timings - the RAM works perfectly in dual-channel and my system is 100% stable (Prime95; Intel Burnt Test). However, when I first installed the RAM my computer wouldn't boot because I had the timings set to manual. It corrected itself though as my motherboard has automatic memory configuration.

Have you got another computer you can test the memory in? If you reset the BIOS and use just the new chip it should theoretically work; if not it would seem it's either faulty or incompatible with your motherboard.

The RAM is 100% compatible with the PC.

How did you determine this? Is the manufacturer specifically listed in the motherboard's manual and/or website or are you referring to the speed rating? Although all RAM should be compatible with all motherboards with the same memory rating the reality is that there are sometimes incompatibilities, which is why motherboard manufacturers usually list specifically compatible memory.

I recommend resetting the bios with the jumper and not using restore default settings within bios, it is not the same thing, It happened to me many times and the only way it worked was with hard reset.

I took the battery out for 30 seconds, which reset the BIOS. Same issues occured.

I'm surprised this hadn't been suggested earlier. This is the first thing I do in case of a similar event.

Should memtest86+ return any errors, the customer service will replace the memory without blinking.

This is... different somehow mate. I just don't feel that is the issue.

Actually, I haven't found that to be the case at all. I have two pairs of memory installed, each with a different size, different brand, different speed rating and different timings - the RAM works perfectly in dual-channel and my system is 100% stable (Prime95; Intel Burnt Test). However, when I first installed the RAM my computer wouldn't boot because I had the timings set to manual. It corrected itself though as my motherboard has automatic memory configuration.

Have you got another computer you can test the memory in? If you reset the BIOS and use just the new chip it should theoretically work; if not it would seem it's either faulty or incompatible with your motherboard.

Unfortunately, I have no other PC to try it in.

How did you determine this? Is the manufacturer specifically listed in the motherboard's manual and/or website or are you referring to the speed rating? Although all RAM should be compatible with all motherboards with the same memory rating the reality is that there are sometimes incompatibilities, which is why motherboard manufacturers usually list specifically compatible memory.

It's Corsair CMV4GX3M1A1333C9.

The other chip (that works perfectly) is "PNY 4GB DIMM DDR3 PC3-10660 1333 MHz 240 PIN".

So they should both be compatible with the motherboard and with each other I presumed :s

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I will keep my current devices for several years... no planning in upgrading until these devices stop working. Too pricey.
    • Apple raises MacBook and iPad prices as memory costs surge by Karthik Mudaliar Apple has raised the U.S. prices of several MacBook and iPad models, including the MacBook Neo, which it launched for $599 less than four months ago. The company’s cheapest laptop now starts at $699, while some MacBook Pro configurations have increased by $300. The changes affect the MacBook Neo, MacBook Air, MacBook Pro, iPad Air, and iPad Pro. Apple has not changed the hardware or storage included with these models, so customers are simply paying more for the same configurations. Here is how the new US pricing compares with the previous starting prices: Product Previous price New price Increase MacBook Neo $599 $699 $100 13-inch MacBook Air, 512GB $1,099 $1,299 $200 14-inch MacBook Pro, 1TB $1,699 $1,999 $300 16-inch MacBook Pro $2,699 $2,999 $300 11-inch iPad Air, 128GB $599 $749 $150 13-inch iPad Air, 128GB $799 $949 $150 11-inch iPad Pro, 256GB $999 $1,199 $200 13-inch iPad Pro, 256GB $1,299 $1,499 $200 The updated prices are already appearing on Apple’s U.S. online store. The MacBook Neo increase will probably attract the most attention. Apple introduced the laptop in March for $599, pitching it as a more affordable Mac for students and buyers considering Windows laptops or Chromebooks. It uses an A18 Pro processor and originally undercut Dell’s new $699 XPS 13 by $100. Following the increase, the two laptops now have the same starting price. The M5 MacBook Air has also lost the price Apple promoted when it launched in March. The 13-inch model arrived with 512GB of storage for $1,099, while Apple’s store now lists the MacBook Air range as starting at $1,299. The 14-inch MacBook Pro with an M5 chip and 1TB of storage has gone from $1,699 to $1,999. Apple has made similar changes to its iPads. The recently released M4 iPad Air, which launched at the same $599 starting price as its predecessor, now starts at $749 for the 11-inch version. The 13-inch version has risen from $799 to $949. The iPad Pro increases are larger in dollar terms. Apple’s 11-inch M5 iPad Pro now starts at $1,199, up from $999, while the 13-inch version has moved from $1,299 to $1,499. Both base models still include 256GB of storage. Apple blamed the increases on the rapidly rising cost of DRAM and NAND flash, which provide system memory and device storage. The company told Reuters that it had tried to shield customers from the increases but could no longer absorb them. “We have never seen a component price increase this much, this quickly,” Apple said. Tim Cook had already warned that price increases were coming. Cook said Apple’s existing component inventory had softened the immediate impact, but that higher memory costs would increasingly affect the company after the June quarter. Much of the pressure comes from the construction of AI data centers. Memory manufacturers are directing more production toward high-margin server products, leaving PC, tablet, and smartphone makers competing for the remaining supply. Apple has not said whether the new prices are temporary or whether further increases are planned. For now, the changes show that even Apple’s purchasing power has not been enough to keep the AI-driven memory shortage away from consumer devices.
    • Ventoy 1.1.16 is out.
    • This is a none story - these low volume Chinese models will always get new experimental features first because Apple and Samsung can't produce them in huge volume to meet demand.
    • Nvidia GeForce NOW gains support for Dark Scrolls, Empulse, and more by Pulasthi Ariyasinghe The final update of June for Nvidia's cloud gaming service GeForce NOW is now available, and it is touting support for six more games. The company is also drawing subscriber attention towards the summer sales kicking off across stores, so they can stock up on more cloud-supported titles. Of course, the Steam Summer Sale is the biggest promotion, which is kicking off later today. "Supported Steam games can be streamed across devices with GeForce NOW, making it easy to buy a game once, keep progress synced and pick up where the gameplay left off on PCs, Macs, handheld devices, phones, TVs and more," says the company. "In other words, the Steam Summer Sale brings the deals; GeForce NOW adds the flexibility." Don't forget that the GeForce NOW summer sale is still active as well. This limited-time offer drops the 12-month Performance membership from $99.99 to $64.99, saving members $35. At the same time, the 12-month Ultimate membership is currently going for $129.99, dropping the price by $70 from the original $199.99. Here are the games joining GeForce NOW's supported list this week: Dark Scrolls (New release on Steam, available June 22) SAND: Raiders of Sophie (New release on Steam, available June 22) Deer & Boy (New release on Steam, available June 23) EMPULSE (New release on Steam, available June 24) The Adventures of Elliot: The Millennium Tales (Steam) FATAL FURY: City of the Wolves (Steam) With the June expansions coming to an end, Nvidia should be announcing its July GeForce NOW plans next week. Keep in mind that, unlike subscription services like Game Pass or EA Play, a copy of a game must be owned by the GeForce NOW member (or at least have a license via PC Game Pass) to start playing via Nvidia's cloud servers. There is also a limit to how many hours subscribers can use the service per month.
  • Recent Achievements

    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      463
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      134
    4. 4
      Michael Scrip
      77
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!