Windows stops booting when new RAM is installed


Recommended Posts

Currently have 1x 4 GB chip.

Trying to install a second 4 GB chip.

Without the new RAM, it boots fine but with the new RAM (in different slots), Windows reboots when it says "Starting Windows" (the animation doesn't even appear).

It also reboots before Startup Repair or Safe mode get properly started.

PC boots fine if I take out the RAM.

The RAM is 100% compatible with the PC.

Any ideas?

EDIT: Tried taking out the older chip and only put the new one in. Same problems. Faulty RAM?

w/o further info, it's hard to diagnose. are the two sticks identical in specs? some motherboards require that the RAM be placed in certain slots. are they installed correctly? can you run the single, new stick w/o the old stick installed?

I actually had the similar behavior, and the fix was to actually uncheck 'automatic' from the RAM timing and set manually to the rated specs of the RAM. Took me FOREVER to figure that one out...

Also, if you remove your original RAM and use only the new RAM does it still boot? It seems you've only confirmed that it still boots correctly if you remove the new RAM.

w/o further info, it's hard to diagnose. are the two sticks identical in specs? some motherboards require that the RAM be placed in certain slots. are they installed correctly? can you run the single, new stick w/o the old stick installed?

As I said, the RAM is 100% compatible with the PC.

Only using the new chip causes the same problems.

I don't really see a need to even guess. Just take it back to where you bought it say it wouldn't boot when it was in. They should replace it without argument.

I bought it originally from Ebuyer. It didn't work (random BSODs after a few hours) so I RMA'd it to Corsair. This new chip is the RMA replacement chip and now the PC won't even boot :/

I bought it originally from Ebuyer. It didn't work (random BSODs after a few hours) so I RMA'd it to Corsair. This new chip is the RMA replacement chip and now the PC won't even boot :/

Okie doke, continue looking through the bios for the memory timing options then. :rofl:

Although there is still the outside chance that you're just unlucky and got 2 bad sticks in a row.

As I said, the RAM is 100% compatible with the PC.

Only using the new chip causes the same problems.

but you didnt answer my questions.

1. are the sticks identical in specs?

2. some motherboards require that the RAM be placed in certain slots. are they installed correctly?

3. can you run the single, new stick w/o the old stick installed?

Okie doke, continue looking through the bios for the memory timing options then. :rofl:

<snip>

Within Advanced, I see:

  • CPU Configuration
  • Chipset
  • Onboard Devices Configuration
  • USB Configuration
  • PCIPnP
  • Intel VT-d Configuration

but you didnt answer my questions.

1. are the sticks identical in specs?

2. some motherboards require that the RAM be placed in certain slots. are they installed correctly?

3. can you run the single, new stick w/o the old stick installed?

1. Yes. As I said, I know the RAM is fully compatible with the PC.

2. I've tried various slots.

3. Read my original post edit. The edit was made literally 10 seconds after I first made the topic.

Name both modules you are using.

And as said above - ensure RAM timing is set to auto.

If you don't know how to use it, then it should looks like this.

<image snipped>

As I've said, I see nothing like that in the BIOS. It's a very basic motherboard.

I see no way to adjust RAM timings and even if I could, I would never have touched them.

As others have asked, lets try this.

What is the make/model of the memory, what is the make/model of the system or motherboard?

Help us, help you...

It's a custom built PC. The motherboard information is in my signature, the Asus P7H55-M SI.

Both RAM chips are 4 GB DDR3-1333.

I've found out the hard way that mobo's are extremely sensitive on RAM. If you're using different brands, that could be causing problems. If you're using a brand and model not even listed by the moobo manufacturer that could be your cuplrit too. I built an i3 HTPC and had stability problems. A fellow Neowinian pointed out the list of compatible RAM with my mobo and I bought it and haven't had a single problem since. From now on when I build, I'm going to the mobo site and making sure I buy RAM listed as approved. That's the biggest lesson I've learned in years.

does this help you at all? i pulled this information about the BIOS from the motherboard's manual

post-34502-0-63999300-1343137523.jpg

The only BIOS screen I can find related to RAM is this one, and it's all set to Auto:

post-645-0-23761000-1343137709.jpg

I will try resetting the BIOS defaults in 30 minutes when I get home, although I can't see it helping unfortunately.

2. Set bios defaults

3. Memtest x86

I'm surprised this hadn't been suggested earlier. This is the first thing I do in case of a similar event.

Should memtest86+ return any errors, the customer service will replace the memory without blinking.

I've found out the hard way that mobo's are extremely sensitive on RAM. If you're using different brands, that could be causing problems. If you're using a brand and model not even listed by the moobo manufacturer that could be your cuplrit too.

Actually, I haven't found that to be the case at all. I have two pairs of memory installed, each with a different size, different brand, different speed rating and different timings - the RAM works perfectly in dual-channel and my system is 100% stable (Prime95; Intel Burnt Test). However, when I first installed the RAM my computer wouldn't boot because I had the timings set to manual. It corrected itself though as my motherboard has automatic memory configuration.

Have you got another computer you can test the memory in? If you reset the BIOS and use just the new chip it should theoretically work; if not it would seem it's either faulty or incompatible with your motherboard.

The RAM is 100% compatible with the PC.

How did you determine this? Is the manufacturer specifically listed in the motherboard's manual and/or website or are you referring to the speed rating? Although all RAM should be compatible with all motherboards with the same memory rating the reality is that there are sometimes incompatibilities, which is why motherboard manufacturers usually list specifically compatible memory.

I recommend resetting the bios with the jumper and not using restore default settings within bios, it is not the same thing, It happened to me many times and the only way it worked was with hard reset.

I took the battery out for 30 seconds, which reset the BIOS. Same issues occured.

I'm surprised this hadn't been suggested earlier. This is the first thing I do in case of a similar event.

Should memtest86+ return any errors, the customer service will replace the memory without blinking.

This is... different somehow mate. I just don't feel that is the issue.

Actually, I haven't found that to be the case at all. I have two pairs of memory installed, each with a different size, different brand, different speed rating and different timings - the RAM works perfectly in dual-channel and my system is 100% stable (Prime95; Intel Burnt Test). However, when I first installed the RAM my computer wouldn't boot because I had the timings set to manual. It corrected itself though as my motherboard has automatic memory configuration.

Have you got another computer you can test the memory in? If you reset the BIOS and use just the new chip it should theoretically work; if not it would seem it's either faulty or incompatible with your motherboard.

Unfortunately, I have no other PC to try it in.

How did you determine this? Is the manufacturer specifically listed in the motherboard's manual and/or website or are you referring to the speed rating? Although all RAM should be compatible with all motherboards with the same memory rating the reality is that there are sometimes incompatibilities, which is why motherboard manufacturers usually list specifically compatible memory.

It's Corsair CMV4GX3M1A1333C9.

The other chip (that works perfectly) is "PNY 4GB DIMM DDR3 PC3-10660 1333 MHz 240 PIN".

So they should both be compatible with the motherboard and with each other I presumed :s

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I think there will be a 27H1 for actual users of 26H1 The 25h2 supports ARM too : Snapdragon X, Snapdragon X Plus and Snapdragon X Elite
    • Poll: Grand Theft Auto VI price predictions, cast your vote by Pulasthi Ariyasinghe After years of waiting, Rockstar will be solidifying the launch date of Grand Theft Auto VI with the launch of pre-orders next week. While the studio has confirmed a date for this occasion, it is yet to attach a price to the highly anticipated game. So let's see what our readers think it will cost at launch. The Grand Theft Auto VI pre-orders will kick off on June 25 for digital and physical editions. Unless some last-minute changes happen, the release date will be November 19, 2026, across Xbox Series X|S and PlayStation 5. Unfortunately, there's still no information about a PC version from the developer or the publisher Take-Two. Now the question becomes, how much will Grand Theft Auto VI cost at launch? The game is predicted by some analysts to be the biggest launch of an entertainment product ever. With the amount of hype that has been built behind it and with ballooning development costs, Take-Two may price this Grand Theft Auto entry differently from other AAA titles. The current price of a AAA game is $69.99. That norm almost rose to $79.99 before calming down. But with such a massive release, Grand Theft Auto VI may be the game that pushes the boundary again. It's also possible that Take-Two keeps the price relatively low to increase the number of players that jump in early and keep them hooked on Grand Theft Auto Online to spend on microtransactions for years to come. Keep in mind that the below poll is asking for a prediction of the standard edition price, not a deluxe or any other special edition that Take-Two will introduce for additional benefits. Also, there is also the chance of the company splitting up the campaign and online portions. If you think that will happen, put your vote on what you think will be the total cost of the two. Poll Poll: How much will Grand Theft Auto VI cost? $59.99 $69.99 $79.99 $89.99 $100 or more Submit Vote If you have a very specific prediction in mind, sound off in the comments below.
    • Would you please fix your graphics. They are outdated and don't fit the article.
    • The Light of Life? We actually do glow till our Death, study finds by Sayan Sen Image by Rafael Rendon via Pexels A study by researchers at the University of Calgary has found that living organisms produce an extremely faint light known as ultraweak photon emission, and that this glow appears to drop significantly after death. The research was published in the Journal of Physical Chemistry in April 2025 and quickly drew widespread attention, leading to more than 200 news stories about the findings. Ultraweak photon emission (or UPE), sometimes called biophoton emission, refers to tiny amounts of light released by living cells as a result of normal biological activity. A photon is the basic particle of light, and researchers say every living system examined so far, including plants and animals, has been found to emit these photons. The glow is far too faint to be seen by the human eye. “I suppose it has a little to do with people being reminded of auras,” says Dr. Christoph Simon, PhD, one of the authors of the study and a professor in the Department of Physics and Astronomy in the Faculty of Science. “It is a fact that living beings glow. It’s a very weak glow, but it’s there and visible with very sensitive cameras.” According to the study, the light involved is extremely weak, ranging from 10 to 1,000 photons per square centimetre per second across a spectral range of 200 to 1,000 nanometres. For comparison, a nanometre is one-billionth of a metre and is commonly used to measure wavelengths of light. Detecting emissions at such low levels requires highly specialized equipment. To study the phenomenon, researchers used electron-multiplying charge-coupled device (EMCCD) and charge-coupled device (CCD) cameras. These imaging systems are designed to detect extremely small amounts of light, including individual photons, while minimizing background noise. The technology allowed researchers to capture signals that would otherwise be impossible to observe. The team worked with the Human Health Therapeutics Research Centre at the National Research Council of Canada (NRC) in Ottawa to examine photon emissions in mice. Researchers took two-hour exposure images of the animals before and after death and compared the results. “We saw that the level of light that they emit – this biophoton glow – is distinctly different between living and dead animals,” says Dr. Daniel Oblak, PhD, an associate professor in Physics and Astronomy and the corresponding author of the study. The images showed a clear decrease in photon emissions after death across the entire body of each mouse. According to the researchers, this provided direct evidence that living and dead tissue produce different levels of ultraweak photon emission. “It’s a very small amount and it’s, of course, very tricky to detect,” Oblak says. The study grew out of discussions between Simon, whose research interests include quantum biology, and Oblak, whose work focuses on detecting light for quantum communication experiments. Quantum biology is a field that explores whether processes described by quantum physics, which studies matter and energy at very small scales, may also play a role in living systems. “Since I work as a quantum physicist on light detection for quantum communication, I thought that experimentally we have a lot of the tools to be able to detect the light,” Oblak explains. The researchers also investigated UPE in plants and found that the light changed in response to stress. When plants were exposed to higher temperatures or physically injured, their photon emissions increased. Chemical treatments also affected the glow. Among the substances tested, the local anesthetic benzocaine produced the strongest emission response when applied to injured plant tissue. These findings suggest that ultraweak photon emission is closely linked to biochemical and metabolic activity inside living organisms. Metabolism refers to the chemical reactions that allow cells and organisms to stay alive and function. Because these reactions change when an organism experiences stress, injury or disease, researchers believe UPE may provide a way to monitor those changes. The researchers stress that the glow is a physical and biological phenomenon, not a metaphysical one. Oblak says more research is needed to understand exactly how the light is produced and what information it may reveal about the condition of living tissue. “We must understand what that is to figure out what’s happening,” he says. “If we can understand how that relates to certain influences on the body – stress, diseases – then that could be used as a diagnostic tool.” The researchers believe the technique could eventually help scientists study health and disease without invasive procedures. Because UPE can be measured without adding dyes, markers or labels, it may offer a way to monitor whether tissue is healthy, damaged or alive. In plants, it could help researchers better understand how organisms respond to injury, heat and other forms of stress. While the work is still in its early stages, the study demonstrates that ultraweak photon emission imaging can provide a non-invasive and label-free way to observe biological activity. Researchers say the approach could become a useful tool for studying vitality, stress responses and other important processes in both animals and plants. Source: University of Calgary, ACS publication This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      82
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      72
  • Tell a friend

    Love Neowin? Tell a friend!