Exchange and DDNS? Possible?


Recommended Posts

I'm sure all you get is a DNS address resolved to an IP with any Dynamic DNS service.

The only way I can think is to have an alias such as mx0.example.com which is a CNAME of test.no-ip.org. mx0.example.com will then need to be a record itself. I guess you could also just have test.no-ip.org as your only MX record.

My first thought though would be to test the possibility of receiving and sending on port 25. I would have thought most domestic ISP's will block this communication.

SK[' timestamp=1343722926' post='595047579]

I'm sure all you get is a DNS address resolved to an IP with any Dynamic DNS service.

The only way I can think is to have an alias such as mx0.example.com which is a CNAME of test.no-ip.org.

My first thought though would be to test the possibility of receiving on port 25 and sending. I would have thought most domestic ISP's will block this communication.

well i think there was also a way around this for using a ddns fqdn as a web server from your home rite? i imagine there is something also like this for stmp (port 25, like you comment)

Can't think of a way as every other SMTP server in the world will be expecting to speak to your server on port 25. If your ISP block it then your pretty much stuffed. DynDNS offer some sort of mail feature though.

As I said test the connectivity first before implementing a solution that won't work. I host my three sites on my home network with the same Dynamic IP being used as an alias. It works fine. I know though that port 25 is blocked outbound as there is no mail functionality working. Kinda annoying as I run forums. Still, they are dead ones these days and are only really used for reference.

SK[' timestamp=1343722926' post='595047579]

I'm sure all you get is a DNS address resolved to an IP with any Dynamic DNS service.

The only way I can think is to have an alias such as mx0.example.com which is a CNAME of test.no-ip.org. mx0.example.com will then need to be a record itself. I guess you could also just have test.no-ip.org as your only MX record.

My first thought though would be to test the possibility of receiving and sending on port 25. I would have thought most domestic ISP's will block this communication.

Not all do. Time Warner for example leaves the port open but adds its residential IP blocks to one or more DNS Block lists, so that all mail that comes from them gets marked as spam by receivers who check against said lists.

I'd imagine using something like DDNS probably would cause a similar issue. Though idk.

If what you want to do is accept incoming mail, yeah not too many issues there - get a MX record pointed to where you want to accept mail. That is about it.

Where the problem comes in is sending, as mentioned already -- most of the major players will block you from sending them email from a dynamic IP. Even if not using a block list, do you have a valid PTR for this IP - not going to accept mail from you.

So if what you want to do is send mail to your friend billy on his HOME smtp server, then sure go for it. If what you want to do is send actual production email that your sure is going to get there. Not so much, not to any of the major player domains, or any companies doing any sort of decent filtering.

  • 5 months later...

I run my own exchange server. Receiving emails are OK but sending gives an error. Tested via Exchange Connectivity and its says that no PTR Record available for the IP. Any solution to this?

by the way, I use Zerigo as my Dynamic DNS.

receiving you will be fine, it is always the sending. Many isps have closed out bound port 25 traffic outside of their network when on their dynamic ip network. Many spam filters have excluded dynamic range from being able to get through. How do you get around the world denying you?

The option would be to send through a mail host, you can use your isp mail host, but they may have a sending limit.

receiving you will be fine, it is always the sending. Many isps have closed out bound port 25 traffic outside of their network when on their dynamic ip network. Many spam filters have excluded dynamic range from being able to get through. How do you get around the world denying you?

The option would be to send through a mail host, you can use your isp mail host, but they may have a sending limit.

Using my ISP Mail Host is a great idea. I don't mind if they have sending limit. Do I only require to get the SMTP for the ISP? or what else info is required?

yeah sure there are lots of people that provide FREE email servers for you to send your mail through :rolleyes:

If you want/need to send email - then you have to be ready to show your not some random box on the net sending spam. No business that needs to use email is going to be on a dynamic IP. Your also going to be able to setup a PTR because again your not a on dynamic IP and your ISP provides you the ability to change the name the IP resolves too. Only the owning ISP can do this, arin controls who where netblocks point for dns here in the US, other parts of the world would be other orgs, lacnic, ripe, apnic, afrinic

Shoot more and more companies are giving up on running their own mail and doing it in the cloud themselves - not even running their own email servers any more. Or contract out companies to be the front man to their exchange boxes - where this other network sends and recv the mail, and exchange gets mail from this company, and sends all email through them "smart host"

Here is the thing - running your own email server on a home connection for anything other than a hobby or for you to get mail from to some bs domain that gets a couple of mails a day and sends a few a day through your isp email server is nothing more than an exercise in futility.

More likely than not your prob just going to end up running a spam machine anyway ;)

edit: What version of exchange are you running? Look up how to setup smarthost. Keep in mind that many isp will not allow you to send mail from other than your email address, ie say account is [email protected] -- many will not allow you to send mail through their servers that say the email is from [email protected]

SMTP you will need as well as your account info to be able to authenticate and send mail through. You will need to send mail as this account though...the mail header needs to show this for your recipients to be able to receive mail. Unless they just do a ip check (which may be the case), but if they do any sort of resolve and the ip doesn't match the header host it won't make it through. There is a lot that goes on to verify authenticity of the sender in a spam filter.

edit: What version of exchange are you running? Look up how to setup smarthost. Keep in mind that many isp will not allow you to send mail from other than your email address, ie say account is [email protected] -- many will not allow you to send mail through their servers that say the email is from [email protected]

am using Exchange Server 2013 over Windows server 2008 R2 (which is a DC as well). My ISP is Saudi Net (worst ISP in the entire middle east with no support at all). Cant even request for PTR. Tried the SMTP for them but still not working, maybe am not configuring Exchange Server properly.

SMTP you will need as well as your account info to be able to authenticate and send mail through. You will need to send mail as this account though...the mail header needs to show this for your recipients to be able to receive mail. Unless they just do a ip check (which may be the case), but if they do any sort of resolve and the ip doesn't match the header host it won't make it through. There is a lot that goes on to verify authenticity of the sender in a spam filter.

I tried tons of ways but none work. Web Server was way easy configuring compared to exchange server :/

"Cant even request for PTR."

I don't know of any ISP that would setup PTR of a dynamic IP other than the generic ones you get.. For example

;; QUESTION SECTION:

;xx.xx.13.24.in-addr.arpa. IN PTR

;; ANSWER SECTION:

xx.xx.13.24.in-addr.arpa. 7200 IN PTR c-24-13-xx-xx.hsd1.il.comcast.net.

Now such a PTR might meet some filtering some domains do in the sense that it exists.. Others might reject it because its not a true reflection of the forward name.. So for example if your mail server IP is resolved via smtp.somedomain.tld, they might like the PTR of the IP that resolves to to reflect the same smtp.somedomain.tld

As I already mentioned, some ISPs won't allow their smtp servers to send mail for anything other than the account holder email address. So if your email address with your isp is [email protected] and your trying to send email from [email protected] - even if you auth with your specific account info, their server might tell you to get lost since the email address is not valid for that account.

Many ISPs don't even allow outbound on 25 from their dynamic client networks, nor allow their smtp server to send email for any other email address then what is listed on the specific account - this is to help reduce spam being sent from their network. If you have such restrictions then your only solution is to pay for a smarthost that allows you to send mail they forward on your behalf on a different port, etc. The dyndns company already mentioned provides such solutions. If you not willing to pay for such services - how are you affording exchange? ;)

If you not willing to pay for such services - how are you affording exchange? ;)

I can afford all the services, but I wanted to setup it for free at all. By the way, setting up all this was a part of my exercise. Wanted to learn about the Web hosting, Domain Controller, Email exchange. All was setup properly except this Exchange. I tried adding the PTR host in Zerigo (my Dynamic DNS service) it was done but my ISP really need to assign me a PTR record to my IP (which seems not possible for Dynamic IP Users). How about if I search for some free SmartHost providers before paying for something :rofl:

Edit: by the way, I get free license for Microsoft Products :D so trying all of them is not that bad :rolleyes:

Your not going to find a FREE smart host.. Not that I can think of - I don't even think google apps when it was free for your domains allowed that?

What would the smarthost get out of it? Other than prob blacklisted because you were using them to send spam ;)

You can study the setup of exchange without really having to send mail to all the major players.. Does your isp allow outbound of their network on 25? Simple enough to test, try connecting to a smtp server somewhere?

Cheap way you could do it is get yourself a VPS somewhere... I have a vps for $15 a year that would be more than capable of sending email for me, etc. And I can setup the PTR on the IP the host gave me. So it can be done for very cheap.

But again if all your doing is playing/learning does not matter if the major players will block you.. there are plenty of domains you can send to for testing that wont filter you.

So telnet to a smtp server on 25, can you connect - if so then your isp allows you to send outbound on 25 and could setup exchange to directly send.. Just some of the major players are not going to accept mail from you.

budman@ubuntu:~$ telnet mailin-01.mx.aol.com 25

Trying 205.188.159.42...

Connected to mailin-01.mx.aol.com.

Escape character is '^]'.

554- (RTR:DU) http://postmaster.info.aol.com/errors/554rtrdu.html

554 Connecting IP: 24.13.xx.xx

Connection closed by foreign host.

so you see my ISP allows me outbound on 25, but mail server for AOL told me to get lost ;) Because

54 RTR:DU[/url]

Cheap way you could do it is get yourself a VPS somewhere... I have a vps for $15 a year that would be more than capable of sending email for me, etc. And I can setup the PTR on the IP the host gave me. So it can be done for very cheap.

Where? can I get that too?

Will post the telnet results once I get the exact SMTP for the ISP :wacko:

smtp for the isp? Just do a dns look for any smtp server for any domain. Use aol for an example

As to a vps -- here are some listings of cheap ones

http://www.lowendbox.com/

http://lowendstock.com/

Mine is with http://buyvm.net/

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Did you see their FAQ, its quite good. Have a look in the Advanced section. https://delta.chat/en/help
    • Just install Linux Mint that is a real blessing and many times cheaper because you can continue using your old Windows computer/laptop with the latest Linux updates.
    • Interesting share -- however it does not make sense: Email messages get stored somewhere, so how is Delta Chat "based on email" and decentralized without actually storing anything? By Web3 standard practices, the various Relays would require dedicated storage to make messages available to the recipients (like a large series of message queue channels, akin to racks of traditional post office boxes)... and Contacts must be two-way confirmed in order for encryption keys to be exchanged (ostensibly every key-pair is uniquely bound between sender and recipient) and the Relays would preserve the public keys in order to facilitate message carriage... or every device stores all sorts of keys and contact info. All of this to say, decentralized messaging is like running Bluesky nodes except instead of discovering/browsing public feeds by various posters (at the given node) these Delta Chats would be relaying encrypted messages (via Relays) that only trusted recipients would have the appropriate decryption key (their own private key) to read it. But this doesn't solve the "it's like email" sales pitch. The only way it's like email is that there's encrypted binary stuff being transported from your app into the federated ether of Delta Chat Relays for others to decrypt (hopefully only the intended recipient)... but outside of this federated relays framework, it is absolutely nothing like email.
    • Hasleo Backup Suite Free 5.8.2.2 by Razvan Serea Hasleo Backup Suite Free is a free Windows backup and restore software, which embeds backup, restore and cloning features, it is designed for Windows operating system users and can be used on both Windows PCs and Servers. The backup and restore feature of Hasleo Backup Suite can help you back up and restore the Windows operating systems, disks, partitions and files (folders) to protect the security of your Windows operating system and personal data. The cloning feature of Hasleo Backup Suite can help you migrate Windows to another disk, or easily upgrade a disk to an SSD or a larger capacity disk. System Backup & Restore / Disk/Partition Backup & Restore Backup Windows operating system and boot-related partitions, including user settings, drivers and applications installed in these partitions, which ensures that you can quickly restore your Windows operating system once it crashes. Viruses, power failure, or other unknown reasons may cause data loss, so it is a good habit to regularly back up the drive that stores important files, you can at least recover lost files from the backup image files in the event of a disaster. System Clone / Disk Clone / Partition Clone Migrate the Windows operating system from one disk to another SSD or larger disk without reinstalling Windows, applications and drivers. Clone entire disk to another disk and ensure that the contents of the source disk and the destination disk are exactly the same. Clone a partition completely to the specified location on the current disk or another disk and ensure that the data will not be changed. File Backup & Restore Back up specified files(folders) instead of the entire drive to another location to protect your data, so you can quickly restore files(folders) from the backup image files when needed. Incremental/Differential/Full Backup Different backup modes are supported, you can flexibly choose data protection schemes, which can improve backup performance and save storage space while ensuring data security. Delta Restore Delta restore uses advanced delta detection technology to check the changed blocks on the destination drive and restore only the changed blocks, so it has a faster restore speed than the traditional full restore. Universal Restore This feature can help us restore the Windows operating system to computers with different hardware and ensure that Windows can work normally without any hardware compatibility issues. Hasleo Backup Suite 5.8.2.2 changelog: Improved creation of bootable media that supports the UEFI CA 2023 certificate Fixed an issue that caused system restore to fail Fixed an issue where file backup could not list drives under Windows ARM64 Fixed an issue that caused backup of MacOS files/folders shared via Samba to fail Fixed an issue that caused "Smart Backup" to not work properly Fixed other minor bugs Download: Hasleo Backup Suite 5.8.2.2 | 39.7 MB (Freeware) Links: Hasleo Backup Suite Website | Hasleo Backup Suite Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Shotcut 26.6.25 by Razvan Serea Shotcut is a free, open source, cross-platform video editor for Windows, Mac and Linux. Major features include support for a wide range of formats; no import required meaning native timeline editing; Blackmagic Design support for input and preview monitoring; and resolution support to 4k. Editing Features Trimming on source clip player or timeline with ripple option Append, insert, overwrite, lift, and ripple delete editing on the timeline 3-point editing Hide, mute, and lock track controls Multitrack timeline with thumbnails and waveforms Unlimited undo and redo for playlist edits including a history view Create, play, edit, save, load, encode, and stream MLT XML projects (with auto-save) Save and load trimmed clip as MLT XML file Load and play complex MLT XML file as a clip Drag-n-drop files from file manager Scrubbing and transport control Video Effects Video compositing across video tracks HTML5 (sans audio and video) as video source and filters 3-way (shadows, mids, highlights) color wheels for color correction and grading Eye dropper tool to pick neutral color for white balancing Deinterlacing Auto-rotate Fade in/out audio and fade video from and to black with easy-to-use fader controls on timeline Video wipe transitions: bar, barn door, box, clock (radial), diagonal, iris, matrix, and custom gradient image Track compositing/blending modes: Over, Add, Saturate, Multiply, Screen, Overlay, Darken, Dodge, Burn, Hard Light, Soft Light, Difference, Exclusion, HSL Hue, HSL Saturation, HSL Color, HSL Luminosity. Video Filters: Alpha Channel: Adjust, Alpha Channel: View, Blur, Brightness, Chroma Key: Advanced, Chroma Key: Simple, Contrast, Color Grading, Crop, Diffusion, Glow, Invert Colors, Key Spill: Advanced, Key Spill: Simple, Mirror, Old Film: Dust, Old Film: Grain, Old Film: Projector, Old Film: Scratches, Old Film: Technocolor, Opacity, Rotate, Rutt-Etra-Izer, Saturation, Sepia Tone, Sharpen, Size and Position, Stabilize, Text, Vignette, Wave, White Balance Speed effect for audio/video clips Hardware Support Blackmagic Design SDI and HDMI for input and preview monitoring Leap Motion for jog/shuttle control Webcam capture Audio capture to system audio card Capture (record) SDI, HDMI, webcam (V4L2), JACK audio, PulseAudio, IP stream, X11 screen, and Windows DirectShow devices Multi-core parallel image processing (when not using GPU and frame-dropping is disabled) DeckLink SDI keyer output OpenGL GPU-based image processing with 16-bit floating point linear per color component Shotcut 26.6.25 changelog highlights: Added basic support for OpenFX (OFX) video plugins. Added VST2 audio plugin support for third-party audio effects. Added Safe Mode to launch Shotcut without external plugins for easier crash recovery. Added an experimental plugin UI generator (--experimental) for supported filters and plugins. Added a new Noise Reduction audio filter powered by RNNoise. Added HDR export support. Added PQ HDR metadata options for HDR exports. Added the ability to view HDR previews in full-screen mode. Improved Vulkan display support on Linux. Fixed DeckLink and UltraStudio external monitor deadlocks. Fixed Opus audio export warnings related to frame_duration. Improved plugin discovery and compatibility for supported OpenFX and VST2 plugins. Expanded command-line options for testing experimental features. Improved overall application stability when using third-party plugins. Enhanced HDR editing and preview workflow. Included numerous bug fixes, performance optimizations, and general stability improvements throughout the application.[full release notes] Download: Shotcut 26.6.25 | Portable | ARM64 ~200.0 MB (Open Source) View: Shotcut Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      +Edouard
      229
    3. 3
      PsYcHoKiLLa
      163
    4. 4
      Steven P.
      76
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!