Exchange and DDNS? Possible?


Recommended Posts

I'm sure all you get is a DNS address resolved to an IP with any Dynamic DNS service.

The only way I can think is to have an alias such as mx0.example.com which is a CNAME of test.no-ip.org. mx0.example.com will then need to be a record itself. I guess you could also just have test.no-ip.org as your only MX record.

My first thought though would be to test the possibility of receiving and sending on port 25. I would have thought most domestic ISP's will block this communication.

SK[' timestamp=1343722926' post='595047579]

I'm sure all you get is a DNS address resolved to an IP with any Dynamic DNS service.

The only way I can think is to have an alias such as mx0.example.com which is a CNAME of test.no-ip.org.

My first thought though would be to test the possibility of receiving on port 25 and sending. I would have thought most domestic ISP's will block this communication.

well i think there was also a way around this for using a ddns fqdn as a web server from your home rite? i imagine there is something also like this for stmp (port 25, like you comment)

Can't think of a way as every other SMTP server in the world will be expecting to speak to your server on port 25. If your ISP block it then your pretty much stuffed. DynDNS offer some sort of mail feature though.

As I said test the connectivity first before implementing a solution that won't work. I host my three sites on my home network with the same Dynamic IP being used as an alias. It works fine. I know though that port 25 is blocked outbound as there is no mail functionality working. Kinda annoying as I run forums. Still, they are dead ones these days and are only really used for reference.

SK[' timestamp=1343722926' post='595047579]

I'm sure all you get is a DNS address resolved to an IP with any Dynamic DNS service.

The only way I can think is to have an alias such as mx0.example.com which is a CNAME of test.no-ip.org. mx0.example.com will then need to be a record itself. I guess you could also just have test.no-ip.org as your only MX record.

My first thought though would be to test the possibility of receiving and sending on port 25. I would have thought most domestic ISP's will block this communication.

Not all do. Time Warner for example leaves the port open but adds its residential IP blocks to one or more DNS Block lists, so that all mail that comes from them gets marked as spam by receivers who check against said lists.

I'd imagine using something like DDNS probably would cause a similar issue. Though idk.

If what you want to do is accept incoming mail, yeah not too many issues there - get a MX record pointed to where you want to accept mail. That is about it.

Where the problem comes in is sending, as mentioned already -- most of the major players will block you from sending them email from a dynamic IP. Even if not using a block list, do you have a valid PTR for this IP - not going to accept mail from you.

So if what you want to do is send mail to your friend billy on his HOME smtp server, then sure go for it. If what you want to do is send actual production email that your sure is going to get there. Not so much, not to any of the major player domains, or any companies doing any sort of decent filtering.

  • 5 months later...

I run my own exchange server. Receiving emails are OK but sending gives an error. Tested via Exchange Connectivity and its says that no PTR Record available for the IP. Any solution to this?

by the way, I use Zerigo as my Dynamic DNS.

receiving you will be fine, it is always the sending. Many isps have closed out bound port 25 traffic outside of their network when on their dynamic ip network. Many spam filters have excluded dynamic range from being able to get through. How do you get around the world denying you?

The option would be to send through a mail host, you can use your isp mail host, but they may have a sending limit.

receiving you will be fine, it is always the sending. Many isps have closed out bound port 25 traffic outside of their network when on their dynamic ip network. Many spam filters have excluded dynamic range from being able to get through. How do you get around the world denying you?

The option would be to send through a mail host, you can use your isp mail host, but they may have a sending limit.

Using my ISP Mail Host is a great idea. I don't mind if they have sending limit. Do I only require to get the SMTP for the ISP? or what else info is required?

yeah sure there are lots of people that provide FREE email servers for you to send your mail through :rolleyes:

If you want/need to send email - then you have to be ready to show your not some random box on the net sending spam. No business that needs to use email is going to be on a dynamic IP. Your also going to be able to setup a PTR because again your not a on dynamic IP and your ISP provides you the ability to change the name the IP resolves too. Only the owning ISP can do this, arin controls who where netblocks point for dns here in the US, other parts of the world would be other orgs, lacnic, ripe, apnic, afrinic

Shoot more and more companies are giving up on running their own mail and doing it in the cloud themselves - not even running their own email servers any more. Or contract out companies to be the front man to their exchange boxes - where this other network sends and recv the mail, and exchange gets mail from this company, and sends all email through them "smart host"

Here is the thing - running your own email server on a home connection for anything other than a hobby or for you to get mail from to some bs domain that gets a couple of mails a day and sends a few a day through your isp email server is nothing more than an exercise in futility.

More likely than not your prob just going to end up running a spam machine anyway ;)

edit: What version of exchange are you running? Look up how to setup smarthost. Keep in mind that many isp will not allow you to send mail from other than your email address, ie say account is [email protected] -- many will not allow you to send mail through their servers that say the email is from [email protected]

SMTP you will need as well as your account info to be able to authenticate and send mail through. You will need to send mail as this account though...the mail header needs to show this for your recipients to be able to receive mail. Unless they just do a ip check (which may be the case), but if they do any sort of resolve and the ip doesn't match the header host it won't make it through. There is a lot that goes on to verify authenticity of the sender in a spam filter.

edit: What version of exchange are you running? Look up how to setup smarthost. Keep in mind that many isp will not allow you to send mail from other than your email address, ie say account is [email protected] -- many will not allow you to send mail through their servers that say the email is from [email protected]

am using Exchange Server 2013 over Windows server 2008 R2 (which is a DC as well). My ISP is Saudi Net (worst ISP in the entire middle east with no support at all). Cant even request for PTR. Tried the SMTP for them but still not working, maybe am not configuring Exchange Server properly.

SMTP you will need as well as your account info to be able to authenticate and send mail through. You will need to send mail as this account though...the mail header needs to show this for your recipients to be able to receive mail. Unless they just do a ip check (which may be the case), but if they do any sort of resolve and the ip doesn't match the header host it won't make it through. There is a lot that goes on to verify authenticity of the sender in a spam filter.

I tried tons of ways but none work. Web Server was way easy configuring compared to exchange server :/

"Cant even request for PTR."

I don't know of any ISP that would setup PTR of a dynamic IP other than the generic ones you get.. For example

;; QUESTION SECTION:

;xx.xx.13.24.in-addr.arpa. IN PTR

;; ANSWER SECTION:

xx.xx.13.24.in-addr.arpa. 7200 IN PTR c-24-13-xx-xx.hsd1.il.comcast.net.

Now such a PTR might meet some filtering some domains do in the sense that it exists.. Others might reject it because its not a true reflection of the forward name.. So for example if your mail server IP is resolved via smtp.somedomain.tld, they might like the PTR of the IP that resolves to to reflect the same smtp.somedomain.tld

As I already mentioned, some ISPs won't allow their smtp servers to send mail for anything other than the account holder email address. So if your email address with your isp is [email protected] and your trying to send email from [email protected] - even if you auth with your specific account info, their server might tell you to get lost since the email address is not valid for that account.

Many ISPs don't even allow outbound on 25 from their dynamic client networks, nor allow their smtp server to send email for any other email address then what is listed on the specific account - this is to help reduce spam being sent from their network. If you have such restrictions then your only solution is to pay for a smarthost that allows you to send mail they forward on your behalf on a different port, etc. The dyndns company already mentioned provides such solutions. If you not willing to pay for such services - how are you affording exchange? ;)

If you not willing to pay for such services - how are you affording exchange? ;)

I can afford all the services, but I wanted to setup it for free at all. By the way, setting up all this was a part of my exercise. Wanted to learn about the Web hosting, Domain Controller, Email exchange. All was setup properly except this Exchange. I tried adding the PTR host in Zerigo (my Dynamic DNS service) it was done but my ISP really need to assign me a PTR record to my IP (which seems not possible for Dynamic IP Users). How about if I search for some free SmartHost providers before paying for something :rofl:

Edit: by the way, I get free license for Microsoft Products :D so trying all of them is not that bad :rolleyes:

Your not going to find a FREE smart host.. Not that I can think of - I don't even think google apps when it was free for your domains allowed that?

What would the smarthost get out of it? Other than prob blacklisted because you were using them to send spam ;)

You can study the setup of exchange without really having to send mail to all the major players.. Does your isp allow outbound of their network on 25? Simple enough to test, try connecting to a smtp server somewhere?

Cheap way you could do it is get yourself a VPS somewhere... I have a vps for $15 a year that would be more than capable of sending email for me, etc. And I can setup the PTR on the IP the host gave me. So it can be done for very cheap.

But again if all your doing is playing/learning does not matter if the major players will block you.. there are plenty of domains you can send to for testing that wont filter you.

So telnet to a smtp server on 25, can you connect - if so then your isp allows you to send outbound on 25 and could setup exchange to directly send.. Just some of the major players are not going to accept mail from you.

budman@ubuntu:~$ telnet mailin-01.mx.aol.com 25

Trying 205.188.159.42...

Connected to mailin-01.mx.aol.com.

Escape character is '^]'.

554- (RTR:DU) http://postmaster.info.aol.com/errors/554rtrdu.html

554 Connecting IP: 24.13.xx.xx

Connection closed by foreign host.

so you see my ISP allows me outbound on 25, but mail server for AOL told me to get lost ;) Because

54 RTR:DU[/url]

Cheap way you could do it is get yourself a VPS somewhere... I have a vps for $15 a year that would be more than capable of sending email for me, etc. And I can setup the PTR on the IP the host gave me. So it can be done for very cheap.

Where? can I get that too?

Will post the telnet results once I get the exact SMTP for the ISP :wacko:

smtp for the isp? Just do a dns look for any smtp server for any domain. Use aol for an example

As to a vps -- here are some listings of cheap ones

http://www.lowendbox.com/

http://lowendstock.com/

Mine is with http://buyvm.net/

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Save 78% on Microsoft Office 2024 Professional Plus: Lifetime License by Steven Parker Created with ChatGPT Today's highlighted deal comes via our Apps + Software section of the Neowin Deals store, where you can save 78% on Microsoft Office 2024 Professional Plus: Lifetime License. The essentials to get it all done. Microsoft Office 2024 Home is the latest version of Microsoft’s renowned productivity suite, which includes essential applications like Word, Excel, PowerPoint, and OneNote. This version is specifically designed for individuals and families seeking reliable tools for various home tasks, including document creation, spreadsheet management, presentation design, and note-taking. Office 2024 Professional Plus is for students and families who want classic Office apps on their Mac or PC. A one-time purchase installed on 1 PC or Mac for use at home or school. Lifetime license One-time purchase installed on 1 Windows PC for use at home or work Instant Delivery & Download – access your software license keys and download links instantly Free customer service – only the best support! Microsoft Office 2024 Professional Plus includes: Microsoft Word Microsoft Excel Microsoft PowerPoint Microsoft Outlook Microsoft OneNote Microsoft Access Is it legit? Click here to verify Microsoft partnership No faffing about with subscriptions, just classic apps that don't expire. Good to Know ONE-TIME PURCHASE INSTALLED ON 1 DEVICE This licensing type will be connected with your Microsoft Account, NOT your actual device. This is a one-use code. The product you are purchasing is NOT MICROSOFT 365. Please read the product details. Redemption deadline: redeem your code within 30 days of purchase Access options: desktop Full versions No subscriptions – no monthly/annual fees Version: 2024 Updates included A Microsoft Office 2024 Professional Plus: Lifetime License normally costs $249.99, but this deal can be yours for just $54.97, that's a saving of $195. For full terms, specifications, and license info, click the link below. Microsoft Office 2024 Professional Plus for PC for $59.99 (was $249.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • Payday TWO!! Is 13 years old man I feel old - I remember trying it out and if I did not know I would say 5-6 years ago or something
    • Payday 2 engine upgrade adds 64-bit and DX11 support, drastically shrinks install size by Pulasthi Ariyasinghe Payday 2, the most popular entry in the heisting game franchise, is getting a surprising update after all these years. This is slated to be a complete engine upgrade that will enhance almost every aspect of the 13-year-old title, targeting performance, loading times, file size, rendering backend, and more. Developer Sidetrack Games is planning a beta to test out the new version ahead of the full public launch. The development team today revealed that the long-awaited upgrade to the 64-bit architecture is happening with this Diesel 3.0 engine update. By letting the game use more ram than 4GB, it is said to improve stability and compatibility on most hardware. It should also help modders in the long term with implementing larger changes too. "While many of the changes are made on the backend and not everything will be visible to you guys because it is a massive rewrite of the entire codebase, there will be a lot of things that you can look forward to," Sidetrack explained. Payday 2 will also hop over from DirectX 9 to 11. Instead of visual improvements, this is slated to reduce the amount of VRAM used by the title, letting more lower-end hardware access the title and run it better. Since these changes would require a complete redownload of the game anyway, Sidetrack says it has revamped "the game's packaging and bundling system." This should reduce the installation size from 86GB to 32GB. "So, now it's time to finally move the game to your SSDs," added the studio. The Payday 2 Diesel Engine 3.0 update is entering open beta on June 30 for Steam users. No console release plans were announced today. Sidetrack Games says it has been working on this complete rewrite of the codebase for the last nine months. While these changes should break most mods, the studio encouraged modders to use the beta period to repair their creations with support from the development team.
  • Recent Achievements

    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
    • First Post
      Kolakid60 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      439
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      156
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      68
  • Tell a friend

    Love Neowin? Tell a friend!