Recommended Posts

"There! Mark of no-life! If that gets you, you're phouchged."

- Sykes, about Crysis 3

"Dirty screen" overlays and excessive sun glare seems to have been lifted from Frostbite, though. Or it's becoming a trend now, like water splat pixel shaders.

I noticed Black Ops 2 now has grime on the lens and a few more lens flares .

"There! Mark of no-life! If that gets you, you're phouchged."

- Sykes, about Crysis 3

"Dirty screen" overlays and excessive sun glare seems to have been lifted from Frostbite, though. Or it's becoming a trend now, like water splat pixel shaders.

At least it makes sense in Crysis 3 (because of the nanosuit's helmet). It's definitely a trend though. Frostbite 2 had it first, then CryENGINE 3 and Unreal Engine 4.

  • 3 weeks later...

Crytek confirms minimum, recommended, and high-performance system operating requirements for PC version of upcoming shooter.

The Crysis series is known for being a graphically demanding franchise, but just how powerful a rig must a gamer have to run Crysis 3 on PC? Crytek has announced the minimum, recommended, and high-performance system operating requirements for the upcoming shooter.

Crysis 3 does not support aging operating system Windows XP, with compatible options including Windows Vista, Windows 7, and Windows 8. Further, players will need at least 2GB of RAM (3GB for Windows Vista) to run the game.

The full system specifications for Crysis 3 are below. Crysis 3 launches during February 2013 for Xbox 360, PlayStation 3, and PC, but most likely not Wii U.

Minimum:

Windows Vista, Windows 7 or Windows 8

DirectX 11 graphics card with 1Gb Video RAM

Dual core CPU

2GB Memory (3GB on Vista)

Example 1 (Nvidia/Intel):

Nvidia GTS 450

Intel Core2 Duo 2.4 Ghz (E6600)

Example 2 (AMD):

AMD Radeon HD5770

AMD Athlon64 X2 2.7 Ghz (5200+)

Recommended

Windows Vista, Windows 7 or Windows 8

DirectX 11 graphics card with 1GB Video RAM

Quad core GPU

4GB Memory

Example 1 (Nvidia/Intel):

Nvidia GTX 560

Intel Core i3-530

Example 2 (AMD):

AMD Radeon HD5870

AMD Phenom II X2 565

High-performance

Windows Vista, Windows 7 or Windows 8

Latest DirectX 11 graphics card

Latest quad core CPU

8GB Memory

Example 1 (Nvidia/Intel):

NVidia GTX 680

Intel Core i7-2600k

Example 2 (AMD):

AMD Radeon HD7970

AMD Bulldozer FX4150

Far Cry 3 has raised the graphical bar, so I'm really interested to see what Crysis 3 will be like. The gameplay videos are pretty impressive but the levels look very linear and quite constrained. Oh, and I really hope it's released on Steam.

Far Cry 3 in-game:

397C0A24A7B0C78DCC990ACDFF8FF2A3CCCA7A05

9410D500235BDD4164721D2587B1D547E76E2920

I commend developers for dropping DX9 support in their games but Crysis 3 is an exception. I really wish they added DX10 support from the get-go in CryENGINE 3. If the minimum requirement is DX11, then I won't be able to play it with my good ol' Radeon HD 4870. :(

I commend developers for dropping DX9 support in their games but Crysis 3 is an exception. I really wish they added DX10 support from the get-go in CryENGINE 3. If the minimum requirement is DX11, then I won't be able to play it with my good ol' Radeon HD 4870. :(

CryEngine3 isn't DX11 only, since Crysis 2 is not even DX11 capable at all and it uses CryENGINE3.

Also I wonder if my newish Geforce GTX660 will be enough to play this at Max.

CryEngine3 isn't DX11 only, since Crysis 2 is not even DX11 capable at all and it uses CryENGINE3.

Also I wonder if my newish Geforce GTX660 will be enough to play this at Max.

CryENGINE 3 isn't DX11-only but DX9 isn't listed in the minimum requirements for Crysis 3. Also, the alpha test for Crysis 3 doesn't support DX9. I don't know when the beta will start but if it doesn't support DX9 too then it most likely won't be in the final release.

CryENGINE 3 isn't DX11-only but DX9 isn't listed in the minimum requirements for Crysis 3. Also, the alpha test for Crysis 3 doesn't support DX9. I don't know when the beta will start but if it doesn't support DX9 too then it most likely won't be in the final release.

Well ok. I'm only saying before now it wasn't DX11 only.

Crysis 3?s advanced graphics settings revealed, high-res textures at launch confirmed

Crysis-3-3-1024x576-610x289.jpg

Following reveal of Crysis 3?s system requirements over the weekend, I?ve received confirmation from EA and Crytek of which precious secondary settings we?ll be able to tweak in the game. If you remember, Crysis 2 launched with an anemic four tweakable options: v-sync, game resolution, HUD bobbing, and a general quality setting. A patch after release expanded these, and fan-made utilities helped out, but the good news is that EA and Crytek aren?t shipping Crysis 3 in the same state.

Here?s what you?ll see if you click on ?Advanced Graphics Options? in Crysis 3.

  • Game Effects
  • Object
  • Particles
  • Post Processing
  • Shading
  • Shadows
  • Water
  • Anisotropic Filtering
  • Texture Resolution
  • Motion Blur Amount
  • Lens Flares

[...]

Source: PC Gamer

It would've have been a damn shame if Crytek didn't learn from Crysis 2. I'm glad the PC version isn't being ignored at launch this time around.

CryEngine3 isn't DX11 only, since Crysis 2 is not even DX11 capable at all and it uses CryENGINE3.

say what? did you somehow miss this free patch?

http://www.mycrysis.com/dx11

Not to mention this isn't about the engine, this is about Crysis 3, which certainly looks to be DX11 only.

say what? did you somehow miss this free patch?

http://www.mycrysis.com/dx11

Not to mention this isn't about the engine, this is about Crysis 3, which certainly looks to be DX11 only.

Oh yea I forgot about that patch. Also, it was Anaron who brought up the engine bits, I was just correcting it.

If any game should have dropped DX9 support it had to be a new Crysis game. And seriously, it's long overdue, DX9 has to go already. Looks like I'll have to upgrade my HD5770 though but I was planning on doing this already.

Oh yea I forgot about that patch. Also, it was Anaron who brought up the engine bits, I was just correcting it.

I think you misunderstood me. I've known for a long time that CryENGINE 3 supports DX11 as well as DX9. When I said DX11-only, I was specifically referring to Crysis 3.

I think you misunderstood me. I've known for a long time that CryENGINE 3 supports DX11 as well as DX9. When I said DX11-only, I was specifically referring to Crysis 3.

However, only the PC can take advantage of that support - consoles cannot (yet).

The sheer breadth of PC hardware that supports DX11, though (in terms of GPUs alone) runs the gamut from the pricey to the ubiquitous.

(The floor of DX11 includes HD4000 (Intel) and HD5xxx (AMD), and those are designed into CPUs (Intel) and motherboard chipsets (AMD) respectively - hence *ubiquitous*.)

However, only the PC can take advantage of that support - consoles cannot (yet).

The sheer breadth of PC hardware that supports DX11, though (in terms of GPUs alone) runs the gamut from the pricey to the ubiquitous.

(The floor of DX11 includes HD4000 (Intel) and HD5xxx (AMD), and those are designed into CPUs (Intel) and motherboard chipsets (AMD) respectively - hence *ubiquitous*.)

I can afford to buy a new video card but I can't afford to buy a new computer. It'd be pointless to upgrade my Radeon HD 4870 when I'm still using an Intel Core2Duo E6750 and a motherboard that doesn't support DDR3 RAM.

Other games that dropped support for DX9 can run on DX10 hardware (e.g. Black Ops 2, Battlefield 3, Need for Speed: Most Wanted). According to the Steam Hardware & Software Survey, 32% of Steam users have DX10 systems. It's not as big as the 53% that have DX11 systems but it's still big enough to warrant attention. I know that Crysis 3 won't be released on Steam but the survey is a good indication of the hardware that PC gamers use.

Anyway, it's unlikely that Crytek will add DX10 support to Crysis 3 so the only real hope that's left is for them to leave DX9 support in (since CryENGINE 3 supports it).

My graphics card is already overheating, just thinking about it.

:laugh:

This topic is now closed to further replies.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!