Recommended Posts

Got the RTM from Technet, and all the issues Ive had accross Windows 8 CP, Windows 8 RP are still present, as well as a new issue.

I performed clean installs each time.

Windows Media player still cannot play any video file, I get a black screen with just audio. AVI, MP4, WMV same result.

X5NoY.png

Also with the Window colour set to Black I cannt read the text on the title bar, it doesnt glow white like it used to in Win7,

wDPkJ.png

Link to comment
https://www.neowin.net/forum/topic/1098785-windows-8-issues/
Share on other sites

If you have enabled Hyper-V, DXVA will be corrupted in many circumstances.

The most common symptoms are no picture, or a green picture displayed. Try using a third party video player with DXVA disabled to determine if this is the issue you're experiencing.

If it is, you can use a video player with DXVA disabled, and also disable hardware acceleration in Flash. Or, uninstall Hyper-V.

If you have enabled Hyper-V, DXVA will be corrupted in many circumstances.

The most common symptoms are no picture, or a green picture displayed. Try using a third party video player with DXVA disabled to determine if this is the issue you're experiencing.

If it is, you can use a video player with DXVA disabled, and also disable hardware acceleration in Flash. Or, uninstall Hyper-V.

All videos play fine in VLC, it's a slight annoyance because sometimes I have record video games and use Movie Maker to edit them, Movie Maker only gets a black screen and audio with any video footage too. I ignored the issue in the CP and RP because they were just betas, now this is RTM I can't ignore them anymore.

When i close the laptop and reopening it, it shows blackscreen again i have to shutdown the PC

that's more than likely the video driver

All videos play fine in VLC, it's a slight annoyance because sometimes I have record video games and use Movie Maker to edit them, Movie Maker only gets a black screen and audio with any video footage too. I ignored the issue in the CP and RP because they were just betas, now this is RTM I can't ignore them anymore.

hmm, i can see how that'd be annoying.

maybe try installing a codec pack to see if it's just a problem with the included codecs

Same issue here. When window color set to black the text on the title bar is unreadable. Could it be possible change it to white with some registry edit?

Is there any Safe Boot mode? I tried F8 during start, no luck.

Yes.

Option 1) Hold SHITF key while clicking on restart.

Option 2) Charm ->Settings -> PC Settings -> General -> Advanced Startup

More info here: http://blogs.msdn.co...ver-before.aspx

so it's been that way since the previews? (on your end)

Yea, never had the issue with Windows 7, did a clean install of the Consumer Preview, the issue struck, later did a clean install of Release Preview, the issue was still present. Done a clean install of Windows 8 Pro now, and the issue is still here.

Yea, never had the issue with Windows 7, did a clean install of the Consumer Preview, the issue struck, later did a clean install of Release Preview, the issue was still present. Done a clean install of Windows 8 Pro now, and the issue is still here.

Do you have Hyper-V enabled?

If so, this is likely causing your issue with video. Your options are to let the issue persist, or disable Hyper-V.

Without Hyper-V enabled, I haven't heard of any issues playing video.

Do you have Hyper-V enabled?

If so, this is likely causing your issue with video. Your options are to let the issue persist, or disable Hyper-V.

Without Hyper-V enabled, I haven't heard of any issues playing video.

I have Client Hyper-V enabled and failed to reproduce the issues. No issues with video playback.

post-65771-0-90959700-1345103601_thumb.p

Also with the Window colour set to Black I cannt read the text on the title bar, it doesnt glow white like it used to in Win7,

Where is the quality control at microsoft these days? Why they leave that like this? Even the window control buttons not visible with black...

Hello,

I have few issues coming into mind now, I have listed them below:

1. Three icons those are Up, Create, Menu are not visable in open window. Software is real apk. I'm not sure its software fault or os. However, had no such issue in windows 7.

post-454645-0-60921400-1345130729.jpg

2. Thumb buttons on PowerDVD 12 taskbar thumbnail isn't showing. i.e previous, play/pause, next. However, it works fine on Aimp, WMP and etc. Of cource its the software fault, even though I'm using latestest version which says windows 8 supported.

post-454645-0-42527500-1345131143.png

PowerDVD 12

post-454645-0-09821400-1345131146.png

AIMP 3

3. In Windows 7 when I click bottom right corner, it would take me right to desktop but that thing isn't working in windows 8. I need to press within the show desktop button. Not outside the screen corner. Its fine when we are free but on busy works, this thing makes annoying. :(

Will post more later.

Thanks...

Best Regards

All videos play fine in VLC, it's a slight annoyance because sometimes I have record video games and use Movie Maker to edit them, Movie Maker only gets a black screen and audio with any video footage too. I ignored the issue in the CP and RP because they were just betas, now this is RTM I can't ignore them anymore.

I know this is a bit off topic but try using Fraps in combination with Virtualdub, and a good X264 or DivX compressor. Much better results IMHO

Do you have Hyper-V enabled?

If so, this is likely causing your issue with video. Your options are to let the issue persist, or disable Hyper-V.

Without Hyper-V enabled, I haven't heard of any issues playing video.

How do I disable Hyper-V? I thought that was only for Virtual Machines?

Also with the Window colour set to Black I cannt read the text on the title bar, it doesnt glow white like it used to in Win7,

To be fair windows 7 didn't display text on explorer's title bar to begin with, I wish I could disable the text all together.

Not sure if its a bug but in the desktop I.E 10 when you close a tab the other tabs double in size before shrinking. Strange behaviour.

Noticed this as well since RP.

I noticed too if you have multiple monitors you still can't snap an app to one and open another one on the other monitor. When you open the second app the first one collapses and shows the desktop.

I have Client Hyper-V enabled and failed to reproduce the issues. No issues with video playback.

Many people have had this issue with Hyper-V, and it is well known.

http://answers.micro...m=1345175932561

It is the only reference to a substantial issue involving video playback that I have experienced, or heard of.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No. The file manager is a lost cause. After all, its dev receives all the undeserved praise he could evre wish from Neowin, without having actually earned it. This has never lead to improvements.
    • TechPowerUp GPU-Z 2.70.0 by Razvan Serea GPU-Z is a lightweight system utility designed to provide vital information about your video card and graphics processor. At launch, it automatically scans your system and reports the card name, GPU, release date and transistors, BIOS version, ROPs, memory type, and memory size. Main Features: Supports NVIDIA, AMD, ATI and Intel graphics devices Displays adapter, GPU and display information Displays overclock, default clocks and 3D clocks (if available) Includes a GPU load test to verify PCI-Express lane configuration Validation of results GPU-Z can create a backup of your graphics card BIOS No installation required, optional installer is available Support for Windows XP / Vista / Windows 7 / Windows 8 / Windows 10 (both 32 and 64 bit versions are supported) GPU-Z 2.70.0 changelog: Improved kernel driver security Added die size for Qualcomm Adreno 741 Added support for NVIDIA RTX 6000D, RTX Pro 500 Blackwell Embedded, Tesla V100-DGXS-32GB, PG500-216 Added support for Intel Arc Pro B70, B65, A60 ES, Alder Lake ES Added support for Qualcomm Snapdragon X2 Elite, 778G/782G Added vendor detection for HKC/Sambada, AWES Download page: GPU-Z 2.70.0 | 11.1 MB (Freeware) View: GPU-Z Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I know I won't ever be using it to make my game. I'd rather pay humans.
    • Nah. For every indie dev that needs to create code for "stuff" or textures, it's a godsend enabler to possibly tackle a project that you may not otherwise. The end result and testing will tell the truth if everything works or doesn't, or a game is just mediocre slop, but now these tools are now there and it's the developer's duty to judge the outcome, and even more so for pro studios. And you gotta remember that they will be at an early stage.
    • whoosh my comment went over your head. Enjoy your notchless 3:2 OLED device
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      159
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Steven P.
      67
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!