Motherboard making dial-up sounds whenever there's activity


Recommended Posts

Originally, I thought the issue was my mechanical hard drive making annoying "loading" sounds whenever the PC loaded anything or whenever I moved the mouse over certain areas of the screen, but I've since replaced that HDD with an SSD, and I'm still hearing the same issue. If I move the mouse or load something, then put my ear up to the case, the sound seems to be coming from the right side of the motherboard. It's an annoying squeal / buzz, similar to a dial up modem but not as harsh. Unfortunately, the noise also travels into my new Studio Monitors, even through an external firewire sound card. I am at a loss. I have no idea what is making the noise and I have no idea how to stop it.

Bad grounding on your power supply / bad or no ground on your wall outlet? I've seen issues like that occur when this was the issue... or a lot of noise on your electical line (thats why they have isolated grounds for equipment)

try taking it to someone elses house and see if you get the same noise, if so, it is probably an electical issue in the house causing it

If you hear it handshake like a modem and then ask "Would you like to play a game", i would be worried :)

Ive had a machine do that, and it was, for me, line noise and its effect on the power supply and on to the motherboard, in the end i put in a surge/noise filtering powerboard

It sounds like a ground loop. Had a friend with the same problem, every time he moved the mouse it was making a "zipping" noise.

He ended up putting passive DI boxes in line with the speakers and using the ground lift to eliminate the noise.

Bad grounding on your power supply / bad or no ground on your wall outlet? I've seen issues like that occur when this was the issue... or a lot of noise on your electical line (thats why they have isolated grounds for equipment)

try taking it to someone elses house and see if you get the same noise, if so, it is probably an electical issue in the house causing it

I leave for work in a few minutes. I'll try taking it over there.

So 3 questions.

Onboard Sound?

What PSU & Motherboard do you have?

Have you tried to see if it's coming from the same spot on the motherboard as the BIOS beeps? Usually the buzz is coming from that speaker.

Mobo and PSU should be in sig specs. EX58 UD3R and...I can't remember the name of the PSU. Doesn't happen with onboard sound. Well, I can still hear it inside of the PC Case / Mobo, but it doesn't travel through my old speakers. It's only really noticeable with the new speakers via external firewire soundcard. (But I've had the sound card for years and it works fine on my laptop). If it's coming from the mobo speaker, can I just disable the speaker somehow?

Dial up sounds ah memories. Maybe your motherboard is just feeling nostalgic :)

Sorry couldnt help, ill depart so that others can continue to offer help.

Haha. The good old days...

If you hear it handshake like a modem and then ask "Would you like to play a game", i would be worried :)

Ive had a machine do that, and it was, for me, line noise and its effect on the power supply and on to the motherboard, in the end i put in a surge/noise filtering powerboard

Man, just looked into noise filtering power strips aren't exactly cheap! But I Actually have one already and it doesn't help. Should I plug the PC into it or the Speakers? With the PC plugged in, it made no difference.

It sounds like a ground loop. Had a friend with the same problem, every time he moved the mouse it was making a "zipping" noise.

He ended up putting passive DI boxes in line with the speakers and using the ground lift to eliminate the noise.

Yeah... That might be an option, but I'd like to eliminate the problem at the source so I don't have to worry about it traveling through the speakers to begin with.

One of my friends had this sorta issue with his computer. He had slightly damaged a capaciter whilst putting a gfx card in and it resulted in this noise. He tried to repair the slightly broken connection and all was well.

Zero explanation why that would cause this problem but it was resolved that way.

maybe it's a bad built in speaker and it just sounds like dial up? there's nothing on your board that would sound like that, i mean 10/100/1000 LAN controllers do not make sounds. disconnet the front panel speaker if you have one and see what happens.

I don't have a front speaker, but there are a lot of issues reported with static on the Antec 900 front out jack. Except I'm not even using that jack...I'm using an external firewire card.

If you go here and scroll down to the second post, then click "Noise while installing a program", that's what I'm hearing. But mine is a bit stronger than that. http://www.gearslutz.com/board/studio-building-acoustics/450785-ground-loop-i-think-problem.html

If possible, try swapping out the power supply. Based on the amount of electrical interference in your computer case, you're probably going to have to switch out everything one at a time if you want to narrow it down, although it's most often your PSU or motherboard.

If possible, try swapping out the power supply. Based on the amount of electrical interference in your computer case, you're probably going to have to switch out everything one at a time if you want to narrow it down, although it's most often your PSU or motherboard.

The only extra PSU I have is too weak, so that probably isn't an option. Man this is awful. I wonder if buying better speaker cables would help. It's weird; when I use my old mouse, there's no "cursor moving" noise, but I still hear the PC's activity.

New progress -

Adjusting the polling rate from 1,000 to 125 Khz got rid of the mouse noise. On the negative side, there's a bit more mouse latency but it's worth the noise going away.

Now all that's left is the noise coming from any sort of activity, such as a program loading or closing a window. I'm going to buy new 1/4 TRS Cables, but it'd still be nice if I could eliminate the issue from the source (the pc) somehow.

Last bump because I'm desperate. Got my new 20gauge braided shield TRS cables today. They GREATLY reduced the noise, but it's still there. I guess I'm screwed at this point because the speakers work fine with everything but my desktop. Everything is grounded into the same outlet. I even tried plugging the desktop into my hallway outlet to try and space everything out, but I still get interference. I wish I knew how to eliminate the noise at the source.

There is NO interference in the BIOS, but it starts immediately when windows begins to load.

I'm not even using the onboard sound. I'm using my firewire external sound card. And onboard is disabled via BIOS just to be safe.

And the firewire audio interface isn't faulty, because it works on other computers and my laptop. The noise is originated form somewhere inside of my PC case and is making its way into my speakers....

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Could you come up with a slightly less depressing background for Tux instead of that gray gradient? Doesn't have to be cheerful, just less of a downer...
    • Linux 7.2's first release candidate gets off to a good start by Paul Hill Credit: Larry Ewing It has been a few weeks since the release of Linux 7.1, and in that time, the Linux 7.2 merge window has been open, where developers can submit their features and patches ready for the upcoming release. That window is now shut, and the release candidate phase has begun so that new features can be tested and further fixes applied. According to the founder of Linux, Linus Torvalds, this week’s release candidate looks “reasonably normal”. Although we are super early in the release candidates, this is a good sign as it makes it more likely that an eighth release candidate will not be needed. Torvalds even mentioned that the update’s stats are only larger than they really are because there was another AMD header drop with a third of the patch just being AMD GPU register definitions, which aren’t big changes but make the code contributed look larger overall. In addition to this, he noted that just over half the patch is drivers, even when excluding the AMD register dump. The rest of the changes are spread out over architecture updates, tooling, documentation, and core kernel updates. In the next week, Torvalds says that he will be chilling out, taking the week “mostly off”. Despite this, he will be reading emails and keeping up with things, so if he is slow responding, now you know why. He said he is hoping for a calm week, but we will just have to see if the second release candidate is actually like that. We should expect seven or eight release candidates before Linux 7.2 is released, so expect it around the end of August. If you missed it a few weeks ago, be sure to check out our coverage of Linux 7.1's release.
    • Ridiculous claim that the labor cost difference of $6000 annually would increase cost per phone by $200. The employees produce 3 phones per month or what?
    • Sparkle 2.20.1 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.1 changelog: You can now change the Animation Direction from Up, Left, or Off. Added configurable animation direction (Up, Left, Off) for improved accessibility Added TTL caching to the system info backend Refactored tweak application flow to await NvidiaProfileInspector Improved IPC listener cleanup to correctly remove specific listeners Fixed online status not updating after successful network requests Updated system info tests to support backend caching Removed electron-toolkit utils dependency in favor of internal is.dev helper Fixed unwanted files and folders being included in application bundles Download: Sparkle 2.20.1 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Never used the G7 Pro, but I've never had a good experience with that style of d-pad and fighting games.
  • Recent Achievements

    • One Month Later
      JKR earned a badge
      One Month Later
    • Dedicated
      Asgardi earned a badge
      Dedicated
    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      496
    2. 2
      +Edouard
      247
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      Steven P.
      86
    5. 5
      macoman
      65
  • Tell a friend

    Love Neowin? Tell a friend!