Unable to restore my iPhone 3GS & also have no carrier signal after dow


Recommended Posts

Basically i'm looking to change carrier & found my iPhone was locked to o2. I found that my "Modem Firmware" is 05.16.05 which according to what i've read means that i can't unlock my iPhone & i would need to downgrade the baseband.

I followed the instructions to downgrade the baseband as listed on iClarified. It didn't seem to work - the "Modem Firmware" number remained 05.16.05. It was late so i went to bed.

I start the day today & go to work & i notice that i don't get an o2 signal at all - even when others i work with do. I've clearly done something bad to my phone.

So tonight i figure i'll just upgrade to 5.1.1 (as i am on 5.0.1). I don't want to upgrade to 6.

So again i download the 5.1.1 restore file from iClarified & follow their instructions to jailbreak the phone for 5.1.1.

I select my iPhone in iTunes & then hit shift while clicking on restore. I select the file 5.1.1 & this is where the problem lays ...... it wont let me restore with this file.

At the top of iTunes, it goes through the process & says it's going to verify to restore & then i get the error:

The iPhone "name" could not be restored. An unknown error occurred (3194).

And that is as far as i get.

Anyone able to help with this as i don't want to try updating to 6.0.

Thanks for the reply

I've never used TinyUmbrella in my life though. I followed the instructions all the same, but when it says untick the box - my box wasn't even ticked, in fact it wasn't even available for ticking as it was greyed out.

Problem remains :(

From reading i see i should try putting it in DFU mode & then try to restore.

Problem is, every time i try this, it puts it in recovery mode, which i read is different to DFU mode. Tried about 10 times now & hit recovery mode (not DFU mode) every time.

Upgrading/Downgrading to 5.1.1 is now NO LONGER SUPPORTED by Apple now that Apple IOS 6.0 has been released and ITUNES will now AUTOMATICLY BLOCK any IOS INSTALLATION other than IOS 6.0!

P.S. if you are successful at installing Apple IOS 5.1.1: You will AUTOMATICLY VOID your Apple Care+ Extended Warrenty and your Asurion Wireless Insurance/TEC by NOT installing the Latest IOS software available for your Device.

Further P.S. I installed IOS 6 on my Mom's Verizon Wireless Apple IPhone 4 8GB Device and so far she has NOT had anything to complain about with it just yet, as she uses the Verizon Wireless Maps Program in order to get turn by turn directions, considering the fact that turn by turn directions is NOT supported on the IPhone 4 using Apple Maps Programs. Just FYI.

Well i don't want the new maps tbh. Plus i want to have an untethered jailbreak of my iPhone, although i would forefeit this for 5.0.1 or 5.1.1 & no jailbreak. I just don't want 6.0 at all. No offence, but i don't care how many people are quite happy with 6.0, i just don't want it. I'm also not worried about voiding any extended warranty.

I just want to know how to get 5.0.1 again, or 5.1.1 on my iPhone. I now receive no carrier signal, so i as a bare minimum want to fix that.

First of all, you would have to find the IOS 5.1.1 .IPSW file (which has already been Removed from ITunes Servers due to the Release of Apple IOS 6.0). Next, you would have to find some way of Bypassing the Apple IOS Security Check, which is designed to block any IOS Installation that is NOT the most recent IOS. Sorry but I do not know how to do that as I am an Apple Developer who always keeps my devices up to date in order to file relevant Bug Reports with Apple. BTW if you pay $99 to Apple to join the Apple Developer Program, you will get access to all of the Apple IOS Beta's that get released to that program (and yes we did have access to the IOS 6.0 Beta's 1-4 and early access to the Gold Master Seed, and we also get the ability to file Bug Reports regarding the Beta Seeds/Gold Master Seed as well. Just FYI.

I don't see why paying Apple a further $99 when i've paid enough ? already would help my situation.

I have both the 5.1.1. .IPSW & the 5.0.1 .IPSW.

I've been provided with a link elsewhere which claims to be able to rectify this problem, but the issue remains the DFU - i can't seem to enter it. Every time i try, it enters recovery mode instead.

In order to enter DFU Mode you have to hold both the Power and Home Buttions until the Device Shuts Off then Release the Power Button but Keep Holding the Home Button with the Device Plugged into the Computer/Mac. If it successfully enters DFU Mode it will still say Recovery Mode in ITunes but The Display on the IOS Device will be completely Blank. Hope this helps.

IT seems i was able to enter DFU mode all along.

iTunes said i was in recovery mode, yet the phone was blank/black like the DFU description states. I even timed the 10 seconds with a watch.

Still, i can't restore to 5.0.1 at all. I believe i need my SHSH blobs saved - well they are. Open Cydia & it lists them, including what i believe is the next one 'up' as well (5.1.1.). I have them saved in a file created by redsn0w too, but it all seems pointless as it STILL doesn't work.

P.S. I too have used DFU Mode before, only difference is that I used it to Remove a Beta IOS Release from my Apple IOS Device before taking it in for Service, and/or trading in an IPhone.

You are forgetting that that Apple IOS 5.1 was in between 5.0.1 and 5.1.1 by the way! :-)

By The Way, I know that you are NOT interested in IOS 6 just yet but I just wanted to let you know that a Jail Break is already Available for the Apple IPhone 5 (according to Neowin's Home Page), which means that there should also be a Jail Break for IOS 6.0 since the IPhone 5 is only available with IOS 6.0. Your choice however.

Is this an untethered jailbreak though?

Also, looking into the SHSH blobs via Cydia, 5.1 isn't listed on mine. It lists some before 5.0.1, it lists 5.0.1 which i'm currently on & it lists 5.1.1.

Things aren't looking good for me avoiding 6.0. Plus an official unlock costs ?15 AND you have to wait 10 business days for it. I was wanting to try out a different carrier SIM so that i could [potentially] sign up to another carrier & replace my 3GS in the coming days. I wasn't wanting to wait 2 weeks!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Google pitches Spanner as one database for all AI agents with these new featues by Karthik Mudaliar Google Cloud is introducing new features within Spanner, its distributed database, as a place where enterprises should keep their data, using which AI agents could make smarter and better decisions. In a detailed blog post, Google highlighted quite a few features coming to Spanner, including relational data, graph relationships, vector search, key-value access, full-text search, and operational analytics together in one database architecture. Google says that today's systems aren't well-made for AI agents. There could be data that is present in one system, search indexes in another, embeddings in a vector database, and relationship data in a graph database. This fragmentation isn't great for AI agents to do their jobs because they don't have access to all of this data in one place. This is where Google is positioning Spanner as a solution. Spanner is already a globally distributed relational database with strong consistency, and Google wants its customers to see it as a broader data layer for AI applications. The company introduced something called Spanner Graph, along with integrated vector search, full-text search, a Cassandra-compatible key-value endpoint, and a columnar engine for analytical queries on operational data. Google also added that its ScaNN-powered vector search can support indexes with more than 10 billion vectors, while the columnar engine can make some analytical scans up to 200 times faster. All of this isn't just exclusive to the Google Cloud Platform, and there's support for multi-cloud as well. This comes via Spanner Omni, which Google says is a downloadable, containerized version of Spanner that can run on Kubernetes and in environments outside Google Cloud, including Microsoft Azure and AWS, and even on-premises infrastructure as well as edge deployments. Google says that customers who are interested in the full-featured edition should contact the company, and there's no word on commercial availability or separate pricing. Those interested can read the full blog by Google Cloud, which details these features individually.
    • Kalmuri 4.2.5 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.5 changelog: Fixed an intermittent crash when using Area Capture Improved stability for Area Capture and screen recording Resolved a capture issue that could occur right after startup Download: Kalmuri 4.2.5 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.5 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • They have lots of info on me, I have a facebook account and have done so for years, it was the thing to have then. My phone number is not on it. I don't have the Facebook app on my phone these days, just the messenger part, and only for a couple of people to contact me, most will text me via SMS or phone. I agree, Meta, like others, even without an account will know something about me. Just have to try and keep some things private Also, never saw the need for Whatsapp, people used to ask for me to join it, but as I said to them, I have SMS and a phone, use that, or email
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      +Edouard
      272
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      98
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!