Digital Speedometer


Recommended Posts

Okay so I am looking at buying a car so I can eventually move out and keep my current job and I am looking at buying a 2006 For Focus LX 1.8 but I want to get a Digital Speedometer, Fuel Indicator and RPM Indicator for the car but I've searched online and cant find ANYTHING at all > <.

Anyone know where I can get a Digital Speedometer etc online.

Link to comment
https://www.neowin.net/forum/topic/1107543-digital-speedometer/
Share on other sites

Any reason why?

You can get devices that hook into the car's diagnostics bus and give you readouts like this, but they're invariably slow to update ? the fastest I could ever get a dedicated diagnostics system to read this stuff was about 1Hz on a modern CAN bus when I was doing research for my degree. Dedicated consumer digital reader devices may fake it faster by interpolating, though.

Also, it's worth noting that many, many cars these days use digital readouts already ? they just have an analogue dial at the end. I don't think you'll find a single new car on the market today that has a mechanical connection all the way to the dashboard. I had a 2005 Mazda (who were owned by Ford at the time) that used such a digital system.

Back on topic, I can't actually help other than stuff like this for iOS: http://sturminteractive.com/2011/07/26/gopoint-technology-gl1-odb-ii-for-ios/ ? my system wasn't designed to be actually used while driving, only recording for later analysis. If you actually end up replacing the car's stock instruments with something else, make sure you do your research thoroughly since having a device that doesn't have an approved calibration can be tricky, law wise, in some areas.

If you're not replacing the car's internal instruments then this post wraps around to the beginning ? why?

I want to get some with Digital Readouts because if I can see in a clear number the speed I am going nice and big on the dashboard it helps.

I have had a few driving lessons and with the Dial it annoys me because I am looking at this needle and I like to see clear numbers in front of me. I just find it easier.

Like you said about them being slow to update. It doesn't even need to be a full replacement just something with a Digital Readout telling me my speed that is apart of the Dashboard.

You can get a car that has them built in - the only car I can think of in that class is the Honda Civic (2006+, at least in the US market). I know it's not an ideal solution, but ikenndac has a good point

Never really liked the look of a Honda Civic Interior TBH.

Just looking for a nice, decent car for ?2,500 that I can add a Digital Read Out too while keeping the old one I guess.

If you have a phone or gps enabled device, then you can download digital speedometer app.

Go to app store and look up then download it to use it while you use it in your car..

Or look for aftermarket shops and you can replace the analog dashboard with your new digital dashboard.

Never really liked the look of a Honda Civic Interior TBH.

Just looking for a nice, decent car for ?2,500 that I can add a Digital Read Out too while keeping the old one I guess.

My aunt has a Suzuki Areo and it had a stock digital speedo, it was inaccurate at times (I find the one in the civic's to be the same case) Nothing beats a dial.

My aunt has a Suzuki Areo and it had a stock digital speedo, it was inaccurate at times

You know, my Mazda was the same. Then, when I was doing the research mentioned in my post further up I noticed that the speed figure received straight from the car's diagnostics bus was much more accurate, and the display was intentionally inaccurate (by around 5% faster than I was actually travelling).

Turns out it's legal for a speedo to be calibrated to read up to 10% too fast, but not for it to read too slow, so car manufacturers intentionally make their speedos a bit too fast to give them a safer margin.

It *also* turns out that all the cars with dials I've had since then are the same, but because you read it as "almost 50mph" instead of "47mph", you notice it a bit less.

If you can't get an in dash replacement, I would honestly suggest you learn how to use an analogue speedo.

Do not try and use a GPS device as a speedo. There are tons of reasons why, including inaccuracy, but also in most countries you will find it's illegal due to the screen or where it's placed or whatever else.

I'd recommend getting a car with dials until you learn how to drive. I'm sorry, but "I don't like it" is ridiculous, you need to know how to read the needles first, then go to a digital.

My car has a standard cluster, with digital speed read out, it came standard with the car. Addons and GPS are not accurate.

You know, my Mazda was the same. Then, when I was doing the research mentioned in my post further up I noticed that the speed figure received straight from the car's diagnostics bus was much more accurate, and the display was intentionally inaccurate (by around 5% faster than I was actually travelling).

Turns out it's legal for a speedo to be calibrated to read up to 10% too fast, but not for it to read too slow, so car manufacturers intentionally make their speedos a bit too fast to give them a safer margin.

It *also* turns out that all the cars with dials I've had since then are the same, but because you read it as "almost 50mph" instead of "47mph", you notice it a bit less.

This was a tolerance thing with cable drive speedos. This doesn't occur in new vehicles. Our shop diagnostic equipment can confirm this too.

Anyway, people don't seem to worry about their speedo being out, just look at the majority of people who have put biggers wheels on their car, and not had the speedo re-calibrated or the default wheel setting changed in the ECU.

This was a tolerance thing with cable drive speedos. This doesn't occur in new vehicles. Our shop diagnostic equipment can confirm this too.

I think you misread my post. While doing the research, I did a 20 minute-long run at 100mph indicated (circular track at Millbrook in the UK). The speedo read 100 mph the whole way, while the ODB bus was reading 96 mph the whole way. The display had an intentional increase.

I think most modern cars have digital dials (but in analog format) I know my Grand Prix's analog gauges are connected to the car's data bus, no analog connection, just data and power. the ODB2 bus though updates a lot less frequently... if its a newer car you might be able to find a gauge cluster that replaces your "analog" gauges with digital ones

but seriosusly though, learn to drive with gauges... even new digital cluster cars have analog gauges on them shown graphically

I'd recommend getting a car with dials until you learn how to drive. I'm sorry, but "I don't like it" is ridiculous, you need to know how to read the needles first, then go to a digital.

I 100% agree. Learn to drive your car the "normal" way, then look at changes.

I 100% agree. Learn to drive your car the "normal" way, then look at changes.

Honestly, I quite agree. If you can't tell how fast you are going by either looking at the dial (which come on, is not a difficult task AT ALL) or by just a judgement of speed, I do not want you driving on the same roads as me. Fortunately, OP is in England.

Let's face it, learn it the "normal" way, because 95%+ of the cars have analog dials. Some may have digital only or a combination of both. Just learn or adapt.

I wouldn't bother, just learn the analogue way (is it even learning?) you tilt your eyes slightly now and then to see the speed. Honestly as you learn to drive you'll find you're able to judge the speed when you're used to the car, same way you learn to change gear by hearing the revs.

If you can't learn to drive with an analogue speedo (everyone else has). Then i doubt you'll be able to put a dash replacement in the car :laugh:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Didn’t Dbrand once complain that Casetify was ripping off their designs a well? seems pretty bad of them to try and get around Valve’s copyright this way with that in mind.
    • Dbrand thought they could get away with this Steam Machine case, Valve disagreed by David Uzondu Image via Dbrand Dbrand has cancelled its highly anticipated Companion Cube enclosure for the Valve Steam Machine, which it teased back in November of last year with a concept render and sign-up page, because it did not ask Valve for permission first before manufacturing the case. According to Dbrand, it took the "backwards approach" of building the product first before asking for permission from the copyright holder. Seven months of work went into the project, requiring over a thousand engineering hours from the design team. Workers developed forty-four sets of injection molding tools, making a unique mold for each sub-component of the crate. When the Companion Cube went live on Monday last week, it, according to Dbrand, quickly became the second-fastest-selling product in the company's fifteen-year history, racking up orders for hundreds of thousands of units. Customers eagerly bought the $129.95 deluxe edition or the bare-bones $99.95 version, which the manufacturer cheekily branded as the "Poverty Cube". It was around this time that the legal eagles at Valve descended on the accessory maker with a formal demand. The developer pointed out that the iconic block design remains protected intellectual property from the game Portal, so unlicensed sales had to stop. Dbrand said that all its pleas to salvage the project with the Valve team, including proposals to run a properly licensed release under official terms "with their blessing", fell on deaf ears, so it had no choice but to obey and remove every trace of the product from the internet. If you bought the enclosure, the company said that banks will process your refund by the end of this week, but if it still hasn't arrived in your account by then, you should not hesitate to contact support. The Steam Machine itself is a high-performance console that Valve designed directly to bring PC gaming into the living room. It was announced on 12th November 2025 (the same day Dbrand announced the Cube) and runs on the Linux-based SteamOS, the same OS that powers the Steam Deck. As for the price, due to the shortage of memory and storage chips, the hardware cost landed much higher than people were expecting, starting at $1,049 for the 512 model (without a controller) or $1,128 with the new gamepad. The premium 2 TB model pushes those prices even higher, selling at $1,349 for the standalone console and hitting $1,428 if you want the bundle.
    • It's listed #399.99 on Amazon, per your link. It's not $299.99.
  • Recent Achievements

    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      264
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      97
    5. 5
      macoman
      58
  • Tell a friend

    Love Neowin? Tell a friend!