Digital Speedometer


Recommended Posts

Okay so I am looking at buying a car so I can eventually move out and keep my current job and I am looking at buying a 2006 For Focus LX 1.8 but I want to get a Digital Speedometer, Fuel Indicator and RPM Indicator for the car but I've searched online and cant find ANYTHING at all > <.

Anyone know where I can get a Digital Speedometer etc online.

Link to comment
https://www.neowin.net/forum/topic/1107543-digital-speedometer/
Share on other sites

Any reason why?

You can get devices that hook into the car's diagnostics bus and give you readouts like this, but they're invariably slow to update ? the fastest I could ever get a dedicated diagnostics system to read this stuff was about 1Hz on a modern CAN bus when I was doing research for my degree. Dedicated consumer digital reader devices may fake it faster by interpolating, though.

Also, it's worth noting that many, many cars these days use digital readouts already ? they just have an analogue dial at the end. I don't think you'll find a single new car on the market today that has a mechanical connection all the way to the dashboard. I had a 2005 Mazda (who were owned by Ford at the time) that used such a digital system.

Back on topic, I can't actually help other than stuff like this for iOS: http://sturminteractive.com/2011/07/26/gopoint-technology-gl1-odb-ii-for-ios/ ? my system wasn't designed to be actually used while driving, only recording for later analysis. If you actually end up replacing the car's stock instruments with something else, make sure you do your research thoroughly since having a device that doesn't have an approved calibration can be tricky, law wise, in some areas.

If you're not replacing the car's internal instruments then this post wraps around to the beginning ? why?

I want to get some with Digital Readouts because if I can see in a clear number the speed I am going nice and big on the dashboard it helps.

I have had a few driving lessons and with the Dial it annoys me because I am looking at this needle and I like to see clear numbers in front of me. I just find it easier.

Like you said about them being slow to update. It doesn't even need to be a full replacement just something with a Digital Readout telling me my speed that is apart of the Dashboard.

You can get a car that has them built in - the only car I can think of in that class is the Honda Civic (2006+, at least in the US market). I know it's not an ideal solution, but ikenndac has a good point

Never really liked the look of a Honda Civic Interior TBH.

Just looking for a nice, decent car for ?2,500 that I can add a Digital Read Out too while keeping the old one I guess.

If you have a phone or gps enabled device, then you can download digital speedometer app.

Go to app store and look up then download it to use it while you use it in your car..

Or look for aftermarket shops and you can replace the analog dashboard with your new digital dashboard.

Never really liked the look of a Honda Civic Interior TBH.

Just looking for a nice, decent car for ?2,500 that I can add a Digital Read Out too while keeping the old one I guess.

My aunt has a Suzuki Areo and it had a stock digital speedo, it was inaccurate at times (I find the one in the civic's to be the same case) Nothing beats a dial.

My aunt has a Suzuki Areo and it had a stock digital speedo, it was inaccurate at times

You know, my Mazda was the same. Then, when I was doing the research mentioned in my post further up I noticed that the speed figure received straight from the car's diagnostics bus was much more accurate, and the display was intentionally inaccurate (by around 5% faster than I was actually travelling).

Turns out it's legal for a speedo to be calibrated to read up to 10% too fast, but not for it to read too slow, so car manufacturers intentionally make their speedos a bit too fast to give them a safer margin.

It *also* turns out that all the cars with dials I've had since then are the same, but because you read it as "almost 50mph" instead of "47mph", you notice it a bit less.

If you can't get an in dash replacement, I would honestly suggest you learn how to use an analogue speedo.

Do not try and use a GPS device as a speedo. There are tons of reasons why, including inaccuracy, but also in most countries you will find it's illegal due to the screen or where it's placed or whatever else.

I'd recommend getting a car with dials until you learn how to drive. I'm sorry, but "I don't like it" is ridiculous, you need to know how to read the needles first, then go to a digital.

My car has a standard cluster, with digital speed read out, it came standard with the car. Addons and GPS are not accurate.

You know, my Mazda was the same. Then, when I was doing the research mentioned in my post further up I noticed that the speed figure received straight from the car's diagnostics bus was much more accurate, and the display was intentionally inaccurate (by around 5% faster than I was actually travelling).

Turns out it's legal for a speedo to be calibrated to read up to 10% too fast, but not for it to read too slow, so car manufacturers intentionally make their speedos a bit too fast to give them a safer margin.

It *also* turns out that all the cars with dials I've had since then are the same, but because you read it as "almost 50mph" instead of "47mph", you notice it a bit less.

This was a tolerance thing with cable drive speedos. This doesn't occur in new vehicles. Our shop diagnostic equipment can confirm this too.

Anyway, people don't seem to worry about their speedo being out, just look at the majority of people who have put biggers wheels on their car, and not had the speedo re-calibrated or the default wheel setting changed in the ECU.

This was a tolerance thing with cable drive speedos. This doesn't occur in new vehicles. Our shop diagnostic equipment can confirm this too.

I think you misread my post. While doing the research, I did a 20 minute-long run at 100mph indicated (circular track at Millbrook in the UK). The speedo read 100 mph the whole way, while the ODB bus was reading 96 mph the whole way. The display had an intentional increase.

I think most modern cars have digital dials (but in analog format) I know my Grand Prix's analog gauges are connected to the car's data bus, no analog connection, just data and power. the ODB2 bus though updates a lot less frequently... if its a newer car you might be able to find a gauge cluster that replaces your "analog" gauges with digital ones

but seriosusly though, learn to drive with gauges... even new digital cluster cars have analog gauges on them shown graphically

I'd recommend getting a car with dials until you learn how to drive. I'm sorry, but "I don't like it" is ridiculous, you need to know how to read the needles first, then go to a digital.

I 100% agree. Learn to drive your car the "normal" way, then look at changes.

I 100% agree. Learn to drive your car the "normal" way, then look at changes.

Honestly, I quite agree. If you can't tell how fast you are going by either looking at the dial (which come on, is not a difficult task AT ALL) or by just a judgement of speed, I do not want you driving on the same roads as me. Fortunately, OP is in England.

Let's face it, learn it the "normal" way, because 95%+ of the cars have analog dials. Some may have digital only or a combination of both. Just learn or adapt.

I wouldn't bother, just learn the analogue way (is it even learning?) you tilt your eyes slightly now and then to see the speed. Honestly as you learn to drive you'll find you're able to judge the speed when you're used to the car, same way you learn to change gear by hearing the revs.

If you can't learn to drive with an analogue speedo (everyone else has). Then i doubt you'll be able to put a dash replacement in the car :laugh:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Honestly... 4 wasn't fun, 5 had unlikeable, annoying, or dull characters... Yeah, to me the magic died with San Andreas.
    • Flameshot 14.0 Final by Razvan Serea Flameshot is a free and open-source, cross-platform tool to take screenshots with many built-in features to save you time. Using Flameshot is as simple as launching, dragging the selection box to cover the area you want to capture, making annotations as needed in on-screen and saving the shot to your computer, all with a very simple and straightforward interface. Flameshot allows users to simply upload their screenshots directly to the cloud in order to easily share it with others. You can upload your image directly to Imgur with a single click and share the URL with others. In-app screenshot editing - You can choose to add an arrow mark, highlight text, blur a section (blur or pixelate an area), add a text, draw something, add a rectangular/circular shaped border, add an incrementing counter number, and add a solid color box with Flameshot's built-in editing tools. Command-line interface (CLI) - Flameshot has several commands you can use in the terminal without launching the GUI via a command line interface. The command line interface lets you script Flameshot and use it as the subject of key binds. Flameshot 14.0 release notes: This release brings major improvements to multi-monitor support, fractional scaling support, new capture workflows, and a long list of bug fixes across all platforms. Changelog: New Multi-Monitor Capture Workflow New monitor selection screen before capture for better multi-monitor and mixed-scaling support. Option to auto-capture the monitor under the cursor (X11 & Windows). Tray menu can directly select a monitor. Linux Improvements XDG Desktop Portal is now the primary screenshot method. Added legacy X11 fallback option for minimal window managers. New D-Bus capture API for scripting and automation. Windows Enhancements Global screenshot hotkeys now supported (not limited to Print Screen). New portable mode stores settings next to the executable. Clipboard now always uses PNG format for better compatibility. CLI & Platform Updates Redesigned flameshot screen command with per-monitor capture support. Added native Nix Flake support. More compact launcher UI and improved update notifications. Major Fixes Multiple Wayland stability fixes, including KDE Plasma crash fixes. Clipboard compatibility improvements for GNOME, Wayland, X11, Windows, and macOS. Fixed D-Bus hangs, capture crashes, and HiDPI region issues. Other Changes Dropped Ubuntu 20.04 (Focal) support. Updated translations and build infrastructure. Intel macOS builds are no longer provided. [full release notes] Download: Flameshot 14.0 | 18.1 MB (Open Source) Download: Flameshot Portable | 53.0 MB Links: Flameshot Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      579
    2. 2
      +Edouard
      183
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      73
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!