[RANT] I wish .NET would burn in hell!


Recommended Posts

First, let me say that I'm not a developer. Whether .Net is a good platform for programming is out of my realm of expertise, nor do I care. As someone who services/maintains multiple PCs at work and on the side, .NET infuruates me. Effing large installers to download, time seems to stop as the POS installs itself and once thats done, you get to download/install patch after patch that all take what is IMO, an unreasonable amount of time to actually install. The fun is then multiplied several times over should you have applications that require different versions of .Net. Microsoft either needs to release a single update rollup for supported versions of .NET or package the installer fully updated. I sincerely hope that .NET dies a firey death sooner rather than later.

Sorta related but Microsft also wastes your time with a fresh Windows 7 Install. Rather than offer you SP1 straight away, they want you to download a **** ton of pre SP1 patches and then offer you SP1. Completely unnecessary! I downloaded the SP1 installer, patched a fresh W7 install, and proceeded to install all post SP1 updates without a problem. Office 2010? Same **** there too!

Eff you Microsoft...just eff you!

[RANT/OFF]

Link to comment
https://www.neowin.net/forum/topic/1109973-rant-i-wish-net-would-burn-in-hell/
Share on other sites

SCCM does it for me. OSD, patch management, desired configuration, config audits, the works.

We went to SCCM for our domain, and gawd was it expensive... over $79,000 just for SCCM and the licenses.. server licenses are $1,500 each... $150 per workstation...

If you were halfway decent at your job, you would have an imaging system setup so you would only have to install updates once.

Don't be a dick. I work for a non-profit. Money is tight and I'm not permitted to purchase snazzy applications like you get. I do use some free imaging software on the newer PCs being donated to save time. We're still running Server 2003 R2 and most of our PCs are donated = few years old by the time I get them.

Your rant has very little to do with the .NET programming language itself.

Yes...you picked up on that I see.

Still beats Java. :p

Unfortunately, you're right, but only from a security standpoint.

I've been trying to get a silent install of Net 4.5 for months. I need to go back and try 4.0, which is the one I need, but though I'd go ahead and get the newest. We're looking at moving to SCCM, but I didn't have time to play with it. Using ZENworks as I'm familiar with it. Just can't get this to work correctly.

Will WSUS install 4.5 or just the updates to installed versions?

Your rant has very little to do with the .NET programming language itself.

Considering .NET isn't a programming language..it's a group of languages and related technologies, I don't see how it could.

Also I vote for slipstreaming as well. Massive time saver.

We went to SCCM for our domain, and gawd was it expensive... over $79,000 just for SCCM and the licenses.. server licenses are $1,500 each... $150 per workstation...

Either I got really lucky, or you got royally screwed. We licensed about 50 copies of Forefront Endpoint Protection 2010 and when they 2012 version came around, we were automatically entitled to the new version. Since they changed Forefront to System Center Endpoint Protection 2012, and integrated It into SCCM, we got a license for SCCM and a SQL Server 2008 Standard license included. We originally paid less than $3000 for 3 years.

.NET updates are indeed really annoying and incredibly slow. I'm not talking about an enterprise system here but whenever I've got to fix computers for friends and family the numerous .NET updates always make everything take AGES.

.NET is going no where, if anything it will get bigger over time

I hope your kidding, .NET is great for developing tools, remember MFC :/. Applications can greatly benefit from .net especially with portability.

If you were halfway decent at your job, you would have an imaging system setup so you would only have to install updates once.

You can slipstream .NET into any windows installer using free tools that are out there. If your just updating workstations, you could always update all workstations at once with a login script :p.

I've got to fix computers for friends and family the numerous .NET updates always make everything take AGES.

You could always stop volunteering to be so helpful :p, or you could teach them how to do it themselves.

I agree .net takes forever to install, but someone can correct me if i'm wrong, MS .net installers do a lot more than just install the .net runtimes, it also creates a system restore point which by itself takes ages.

Sorta related but Microsft also wastes your time with a fresh Windows 7 Install. Rather than offer you SP1 straight away, they want you to download a **** ton of pre SP1 patches and then offer you SP1. Completely unnecessary! I downloaded the SP1 installer, patched a fresh W7 install, and proceeded to install all post SP1 updates without a problem.

That's funny, seeing as how in November of 2011, I bought Win7 that includes SP1!

That's funny, seeing as how in November of 2011, I bought Win7 that includes SP1!

Companies who have VL agreements or MSDN subscriptions can download Win7 with or without sp1. MS updates tend to break things, so some companies might not do the full sp1 update for whatever reason.

Sorta related but Microsft also wastes your time with a fresh Windows 7 Install. Rather than offer you SP1 straight away, they want you to download a **** ton of pre SP1 patches and then offer you SP1. Completely unnecessary! I downloaded the SP1 installer, patched a fresh W7 install, and proceeded to install all post SP1 updates without a problem. Office 2010? Same **** there too!

Or you could spend some time looking through the updates and figure out which one is for the updating process, write down which one it was, install that one, and then install SP1.

Or, I could just ask Seriously? But then I'd be a dick.

Just put the updates on your USB Key. .net version 4.5 includes all updates from 2.0 to 4.5. .net version 1.1 includes all the ones before. Same for Windows Service Packs. Use the FULL installers, not web installers.

.net framework is actually more BENEFICIAL to admins, because it is supposed to be a collection of all the DLL runtimes ever needed for an application, rather than having to hunt down an obsure DLL or OCX file in the old days that you end up downloading from some dodgy website because you can'tfind it anywhere else.

Just put the updates on your USB Key. .net version 4.5 includes all updates from 2.0 to 4.5. .net version 1.1 includes all the ones before. Same for Windows Service Packs. Use the FULL installers, not web installers.

.net framework is actually more BENEFICIAL to admins, because it is supposed to be a collection of all the DLL runtimes ever needed for an application, rather than having to hunt down an obsure DLL or OCX file in the old days that you end up downloading from some dodgy website because you can'tfind it anywhere else.

4.5 should only update 4.0. 3.5 does 3.0 and 2.0.

MS should roll all .net runtimes into a single installer.

And it should be part of the initial Windows install.

I always forget it download it when I first format.. then when I need an app, time to wait lol..

That being said, as someone who has developed with .Net.. it's great for what it is.. and it's not going anywhere.

First, let me say that I'm not a developer. Whether .Net is a good platform for programming is out of my realm of expertise, nor do I care. As someone who services/maintains multiple PCs at work and on the side, .NET infuruates me. Effing large installers to download, time seems to stop as the POS installs itself and once thats done, you get to download/install patch after patch that all take what is IMO, an unreasonable amount of time to actually install. The fun is then multiplied several times over should you have applications that require different versions of .Net. Microsoft either needs to release a single update rollup for supported versions of .NET or package the installer fully updated. I sincerely hope that .NET dies a firey death sooner rather than later.

Sorta related but Microsft also wastes your time with a fresh Windows 7 Install. Rather than offer you SP1 straight away, they want you to download a **** ton of pre SP1 patches and then offer you SP1. Completely unnecessary! I downloaded the SP1 installer, patched a fresh W7 install, and proceeded to install all post SP1 updates without a problem. Office 2010? Same **** there too!

Eff you Microsoft...just eff you!

[RANT/OFF]

Now learn how to do your job properly ;)

  • Like 2

To the OP who was complaining about the cost of software then why don't you talk to Microsoft about their charity licensing?

http://www.microsoft.com/licensing/licensing-options/for-industries.aspx#tab=4

You said you were a non-profit organisation so why not ring them up and find out whether your eligible?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Payday TWO!! Is 13 years old man I feel old - I remember trying it out and if I did not know I would say 5-6 years ago or something
    • Payday 2 engine upgrade adds 64-bit and DX11 support, drastically shrinks install size by Pulasthi Ariyasinghe Payday 2, the most popular entry in the heisting game franchise, is getting a surprising update after all these years. This is slated to be a complete engine upgrade that will enhance almost every aspect of the 13-year-old title, targeting performance, loading times, file size, rendering backend, and more. Developer Sidetrack Games is planning a beta to test out the new version ahead of the full public launch. The development team today revealed that the long-awaited upgrade to the 64-bit architecture is happening with this Diesel 3.0 engine update. By letting the game use more ram than 4GB, it is said to improve stability and compatibility on most hardware. It should also help modders in the long term with implementing larger changes too. "While many of the changes are made on the backend and not everything will be visible to you guys because it is a massive rewrite of the entire codebase, there will be a lot of things that you can look forward to," Sidetrack explained. Payday 2 will also hop over from DirectX 9 to 11. Instead of visual improvements, this is slated to reduce the amount of VRAM used by the title, letting more lower-end hardware access the title and run it better. Since these changes would require a complete redownload of the game anyway, Sidetrack says it has revamped "the game's packaging and bundling system." This should reduce the installation size from 86GB to 32GB. "So, now it's time to finally move the game to your SSDs," added the studio. The Payday 2 Diesel Engine 3.0 update is entering open beta on June 30 for Steam users. No console release plans were announced today. Sidetrack Games says it has been working on this complete rewrite of the codebase for the last nine months. While these changes should break most mods, the studio encouraged modders to use the beta period to repair their creations with support from the development team.
  • Recent Achievements

    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
    • First Post
      Kolakid60 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      440
    2. 2
      +Edouard
      194
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      68
  • Tell a friend

    Love Neowin? Tell a friend!