[RANT] I wish .NET would burn in hell!


Recommended Posts

First, let me say that I'm not a developer. Whether .Net is a good platform for programming is out of my realm of expertise, nor do I care. As someone who services/maintains multiple PCs at work and on the side, .NET infuruates me. Effing large installers to download, time seems to stop as the POS installs itself and once thats done, you get to download/install patch after patch that all take what is IMO, an unreasonable amount of time to actually install. The fun is then multiplied several times over should you have applications that require different versions of .Net. Microsoft either needs to release a single update rollup for supported versions of .NET or package the installer fully updated. I sincerely hope that .NET dies a firey death sooner rather than later.

Sorta related but Microsft also wastes your time with a fresh Windows 7 Install. Rather than offer you SP1 straight away, they want you to download a **** ton of pre SP1 patches and then offer you SP1. Completely unnecessary! I downloaded the SP1 installer, patched a fresh W7 install, and proceeded to install all post SP1 updates without a problem. Office 2010? Same **** there too!

Eff you Microsoft...just eff you!

[RANT/OFF]

Link to comment
https://www.neowin.net/forum/topic/1109973-rant-i-wish-net-would-burn-in-hell/
Share on other sites

SCCM does it for me. OSD, patch management, desired configuration, config audits, the works.

We went to SCCM for our domain, and gawd was it expensive... over $79,000 just for SCCM and the licenses.. server licenses are $1,500 each... $150 per workstation...

If you were halfway decent at your job, you would have an imaging system setup so you would only have to install updates once.

Don't be a dick. I work for a non-profit. Money is tight and I'm not permitted to purchase snazzy applications like you get. I do use some free imaging software on the newer PCs being donated to save time. We're still running Server 2003 R2 and most of our PCs are donated = few years old by the time I get them.

Your rant has very little to do with the .NET programming language itself.

Yes...you picked up on that I see.

Still beats Java. :p

Unfortunately, you're right, but only from a security standpoint.

I've been trying to get a silent install of Net 4.5 for months. I need to go back and try 4.0, which is the one I need, but though I'd go ahead and get the newest. We're looking at moving to SCCM, but I didn't have time to play with it. Using ZENworks as I'm familiar with it. Just can't get this to work correctly.

Will WSUS install 4.5 or just the updates to installed versions?

Your rant has very little to do with the .NET programming language itself.

Considering .NET isn't a programming language..it's a group of languages and related technologies, I don't see how it could.

Also I vote for slipstreaming as well. Massive time saver.

We went to SCCM for our domain, and gawd was it expensive... over $79,000 just for SCCM and the licenses.. server licenses are $1,500 each... $150 per workstation...

Either I got really lucky, or you got royally screwed. We licensed about 50 copies of Forefront Endpoint Protection 2010 and when they 2012 version came around, we were automatically entitled to the new version. Since they changed Forefront to System Center Endpoint Protection 2012, and integrated It into SCCM, we got a license for SCCM and a SQL Server 2008 Standard license included. We originally paid less than $3000 for 3 years.

.NET updates are indeed really annoying and incredibly slow. I'm not talking about an enterprise system here but whenever I've got to fix computers for friends and family the numerous .NET updates always make everything take AGES.

.NET is going no where, if anything it will get bigger over time

I hope your kidding, .NET is great for developing tools, remember MFC :/. Applications can greatly benefit from .net especially with portability.

If you were halfway decent at your job, you would have an imaging system setup so you would only have to install updates once.

You can slipstream .NET into any windows installer using free tools that are out there. If your just updating workstations, you could always update all workstations at once with a login script :p.

I've got to fix computers for friends and family the numerous .NET updates always make everything take AGES.

You could always stop volunteering to be so helpful :p, or you could teach them how to do it themselves.

I agree .net takes forever to install, but someone can correct me if i'm wrong, MS .net installers do a lot more than just install the .net runtimes, it also creates a system restore point which by itself takes ages.

Sorta related but Microsft also wastes your time with a fresh Windows 7 Install. Rather than offer you SP1 straight away, they want you to download a **** ton of pre SP1 patches and then offer you SP1. Completely unnecessary! I downloaded the SP1 installer, patched a fresh W7 install, and proceeded to install all post SP1 updates without a problem.

That's funny, seeing as how in November of 2011, I bought Win7 that includes SP1!

That's funny, seeing as how in November of 2011, I bought Win7 that includes SP1!

Companies who have VL agreements or MSDN subscriptions can download Win7 with or without sp1. MS updates tend to break things, so some companies might not do the full sp1 update for whatever reason.

Sorta related but Microsft also wastes your time with a fresh Windows 7 Install. Rather than offer you SP1 straight away, they want you to download a **** ton of pre SP1 patches and then offer you SP1. Completely unnecessary! I downloaded the SP1 installer, patched a fresh W7 install, and proceeded to install all post SP1 updates without a problem. Office 2010? Same **** there too!

Or you could spend some time looking through the updates and figure out which one is for the updating process, write down which one it was, install that one, and then install SP1.

Or, I could just ask Seriously? But then I'd be a dick.

Just put the updates on your USB Key. .net version 4.5 includes all updates from 2.0 to 4.5. .net version 1.1 includes all the ones before. Same for Windows Service Packs. Use the FULL installers, not web installers.

.net framework is actually more BENEFICIAL to admins, because it is supposed to be a collection of all the DLL runtimes ever needed for an application, rather than having to hunt down an obsure DLL or OCX file in the old days that you end up downloading from some dodgy website because you can'tfind it anywhere else.

Just put the updates on your USB Key. .net version 4.5 includes all updates from 2.0 to 4.5. .net version 1.1 includes all the ones before. Same for Windows Service Packs. Use the FULL installers, not web installers.

.net framework is actually more BENEFICIAL to admins, because it is supposed to be a collection of all the DLL runtimes ever needed for an application, rather than having to hunt down an obsure DLL or OCX file in the old days that you end up downloading from some dodgy website because you can'tfind it anywhere else.

4.5 should only update 4.0. 3.5 does 3.0 and 2.0.

MS should roll all .net runtimes into a single installer.

And it should be part of the initial Windows install.

I always forget it download it when I first format.. then when I need an app, time to wait lol..

That being said, as someone who has developed with .Net.. it's great for what it is.. and it's not going anywhere.

First, let me say that I'm not a developer. Whether .Net is a good platform for programming is out of my realm of expertise, nor do I care. As someone who services/maintains multiple PCs at work and on the side, .NET infuruates me. Effing large installers to download, time seems to stop as the POS installs itself and once thats done, you get to download/install patch after patch that all take what is IMO, an unreasonable amount of time to actually install. The fun is then multiplied several times over should you have applications that require different versions of .Net. Microsoft either needs to release a single update rollup for supported versions of .NET or package the installer fully updated. I sincerely hope that .NET dies a firey death sooner rather than later.

Sorta related but Microsft also wastes your time with a fresh Windows 7 Install. Rather than offer you SP1 straight away, they want you to download a **** ton of pre SP1 patches and then offer you SP1. Completely unnecessary! I downloaded the SP1 installer, patched a fresh W7 install, and proceeded to install all post SP1 updates without a problem. Office 2010? Same **** there too!

Eff you Microsoft...just eff you!

[RANT/OFF]

Now learn how to do your job properly ;)

  • Like 2

To the OP who was complaining about the cost of software then why don't you talk to Microsoft about their charity licensing?

http://www.microsoft.com/licensing/licensing-options/for-industries.aspx#tab=4

You said you were a non-profit organisation so why not ring them up and find out whether your eligible?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • yes AND no the "original" or plain/normal Optiplex 7010 won't be getting any more new firmware updates BUT the Optiplex SFF/SFF Plus {small form factor}, Micro/Micro Plus & Tower/Tower Plus 7010 editions DO get new updates such as this new one   and here are similar guides from the Dell web site for Dell systems: https://www.dell.com/support/kbdoc/en-us/000390990/secure-boot-transition-faq https://www.dell.com/support/kbdoc/en-us/000347876/microsoft-2011-secure-boot-certificate-expiration
    • AT&T has been spying on US citizens with the NSA for decades.. they just know how to keep it more under wraps.. the evil level is still there.
    • >Improved system sounds when using Windows in dark mode. The story behind that bug would be an interesting one.
    • Edifier S3000MKII hi-fi audiophile grade bookshelf speaker is at its lowest price now by Sayan Sen Yesterday we covered a bunch of Dolby Atmos soundbar deals with several ones from Sony, as well as from JBL, Samsung, Polk Audio, and more. You can check them out in this dedicated piece. Those are not audiophile category speakers though as they are built with home theater use in mind. If you are searching for the former then Edifier has its S3000MKII at its lowest price at the moment (purchase link under the specs table down below). This is a two-way bookshelf monitor speaker designed to produce accurate sound. While it may not produce the best high-fidelity audio possible out there, it should still be significantly better than what you will get on soundbars of this price range. As such it will do justice to high-res audio played back through it. The only thing that may feel lacking is sub-bass as Edifier claims the unit can go down to 38 Hz, which should be enough for studio monitor purposes, but not for deep room-shaking rumbling bass. Where this does excel though is in its treble reproduction. With its super-tweeter, it claims to go as high as 40 kHz in the frequency spectrum, which should offer a sense of "air"yness. This is an active speaker which means it packs its own amplfication. It has a top-notch Class D amp that may be able to rival many Class AB designs too in terms of sound reproduction quality. The technical specs of the Edifier S3000MKII are given in the table below: Specification Value RMS Output Power 256W RMS (Treble: 8W × 2, Mid-Low: 120W × 2) Tweeter Driver 107mm × 107mm Planar Magnetic Tweeter Mid-Low Driver 6.5-inch (179mm) Long-Throw Aluminum Diaphragm Driver Frequency Response 38Hz – 40kHz Signal-to-Noise Ratio ≥ 85dB (A) Bluetooth Version Bluetooth 5.0 Bluetooth Codec Qualcomm® aptX™ HD Wireless Speaker Link Proprietary 5.8GHz wireless connection between speakers Supported Hi-Res Audio Hi-Res Audio Certified, up to 24-bit/192kHz Digital Processing XMOS XU216 Digital Signal Processor Audio Inputs Balanced XLR, Optical, Coaxial, USB Type-B, Line In, Bluetooth Input Sensitivity (USB) 400 ± 50mFFs Input Sensitivity (Optical) 400 ± 50mFFs Input Sensitivity (Coaxial) 400 ± 50mFFs Input Sensitivity (Bluetooth) 450 ± 50mFFs Input Sensitivity (Balanced XLR) 1000 ± 50mV Input Sensitivity (Line In) 600 ± 50mV ADC Capability Up to 24-bit/192kHz DSP Capability Up to 24-bit/192kHz DIX Capability Up to 24-bit/216kHz DAC Capability Up to 32-bit/384kHz XMOS Processing Power Up to 2,000 MIPS Edifier S3000MKII Audiophile Active (Powered) Wireless Speakers: $799.99 (Sold by Edifier US, Shipped by Amazon US) If you do not have the kind of budget to spend on the S3000MKII, you can also check out the Edifier R1280Ts which is right now on sale at just $114 (its lowest price in a very long time). Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      442
    2. 2
      +Edouard
      200
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!