Intel/AMD - Nvidia/ATI Debate


Recommended Posts

Ok, so no posting in the debate. So I'll start this here.

I'm not interested in a flame/bashing war, just thought it was interesting how

far apart the CPU votes are, whereas the Video Card votes continue to stay

extremely close.

In the "old" days, you had Intel, AMD, Cyrix (?), etc... and the debates got

really heated about "bang for buck". Today, it's pretty much Intel's world.

But on the video card side... wow. There's still no real clear winner.

Link to comment
https://www.neowin.net/forum/topic/1110423-intelamd-nvidiaati-debate/
Share on other sites

Last time I helped a mate to buy a laptop, it was the only AMD that we could found here on Sheffield, it was an HP Envy with an A6-4455m, the laptop itself it's almost like a ultrabook, battery last, in words of him "all day"

What amazed me of this laptop though, it was that it could play Max Payne 3 (DX11 in low settings) quite fast, and by fast I mean above 30+ fps, there were no slowdowns. I think AMD pretty much has taken in the ultrabook experience competition by quite a lot.

This was the laptop: http://www8.hp.com/uk/en/products/laptops/product-detail.html?oid=5278389 (with cash back at currys they took of 150 pounds of the price)

I would personally like to see a good quality AMD-based motherboard with dual CPU that allows me to also use the GPU portion of the APU's in Crossfire mode. If they did that then they could really hurt Intel on a Price/Performance ratio even more than what they are doing now.

I think it really depends on what you are looking for in a video card. They all have their strengths and weaknesses.

nVidia tends to be very good with their proprietary drivers (on Windows, Linux, and FreeBSD), but the open-source nouveau graphics driver (integrated into the Linux kernel) is somewhat lacking in both features and hardware support (mostly due to nVidia's refusal to provide help or the necessary documentation from what I understand).

AMD is almost exactly the opposite of nVidia. Their proprietary graphics drivers are fairly descent on Windows, but are severely lacking on Linux. However, AMD has been supporting the development of the open-source Radeon graphics driver integrated into the Linux kernel. It is improving rapidly and already provides excellent performance, even on the latest hardware.

Intel's latest generation of GPUs actually provide descent performance for every-day use, although nowhere close to the power of their modern AMD and nVidia counterparts. Their main advantage is excellent driver support on both Windows and Linux. Their officially supported open-source drivers are integrated into the Linux kernel and support full 2D and 3D acceleration, power management, sleep, and generally perform very well.

Summary:

nVidia: Excellent if you need a powerful GPU with good proprietary drivers.

AMD: Excellent if you need a powerful GPU with good open-source drivers.

Intel: Excellent if you can sacrifice power for rock-solid stability.

Note: I only considered technical factors. While price is certainly a very important factor, it is constantly changing and completely unrelated to my general opinion of each manufacturer.

  • Like 2

Intel + NVIDIA FTMFT

Haven't touched AMD since Athlon 64 and dropped ATI 8 years ago when 2 GFX cards bonked out on me within a month (yes, I know 8 years is a long time to hold a grudge over a product, but first impressions are what counts)

I think it really depends on what you are looking for in a video card. They all have their strengths and weaknesses.

nVidia tends to be very good with their proprietary drivers (on Windows, Linux, and FreeBSD), but the open-source nouveau graphics driver (integrated into the Linux kernel) is somewhat lacking in both features and hardware support (mostly due to nVidia's refusal to provide help or the necessary documentation from what I understand).

AMD is almost exactly the opposite of nVidia. Their proprietary graphics drivers are fairly descent on Windows, but are severely lacking on Linux. However, AMD has been supporting the development of the open-source Radeon graphics driver integrated into the Linux kernel. It is improving rapidly and already provides excellent performance, even on the latest hardware.

Intel's latest generation of GPUs actually provide descent performance for every-day use, although nowhere close to the power of their modern AMD and nVidia counterparts. Their main advantage is excellent driver support on both Windows and Linux. Their officially supported open-source drivers are integrated into the Linux kernel and support full 2D and 3D acceleration, power management, sleep, and generally perform very well.

Summary:

nVidia: Excellent if you need a powerful GPU with good proprietary drivers.

AMD: Excellent if you need a powerful GPU with good open-source drivers.

Intel: Excellent if you can sacrifice power for rock-solid stability.

Note: I only considered technical factors. While price is certainly a very important factor, it is constantly changing and completely unrelated to my general opinion of each manufacturer.

I would concur about Nvidia should you want to dual boot- Linux and Windows- . Still has a box up and running with a Nvidia Ge-force 4 4000 64 mb video card that runs XP and Ubuntu 10.04.

Intel + NVIDIA FTMFT

Haven't touched AMD since Athlon 64 and dropped ATI 8 years ago when 2 GFX cards bonked out on me within a month (yes, I know 8 years is a long time to hold a grudge over a product, but first impressions are what counts)

Remember that ATi/AMD hasn't made their own cards in years. So odds are that what you bought were 3rd party made cards...which is what you get with nVidia as well.

So just because one vendor made some bad cards doesn't meant that ATi/AMD graphics cards are bad. I have certain vendors I won't buy cards from based on the reliability ratings I see at a few places. That goes for both ATi/AMD and nVidia.

I would concur about Nvidia should you want to dual boot- Linux and Windows- . Still has a box up and running with a Nvidia Ge-force 4 4000 64 mb video card that runs XP and Ubuntu 10.04.

I would actually say exactly the opposite. I would go with AMD in that case. I prioritize open-source drivers over proprietary drivers because they tend to support much older cards extremely well, have no ABI problems, and work on more than a few "blessed" architectures (namely i686 and AMD64, occasionally ARMv6/v7 as well).

Are you using the proprietary or open-source driver for your GeForce 4? As far as I know, the proprietary driver doesn't support it anymore (although Canonical may have an older version in the repository). Its likely that nouveau would get better performance with a card that old anyway.

I would actually say exactly the opposite. I would go with AMD in that case. I prioritize open-source drivers over proprietary drivers because they tend to support much older cards extremely well, have no ABI problems, and work on more than a few "blessed" architectures (namely i686 and AMD64, occasionally ARMv6/v7 as well).

Are you using the proprietary or open-source driver for your GeForce 4? As far as I know, the proprietary driver doesn't support it anymore (although Canonical may have an older version in the repository). Its likely that nouveau would get better performance with a card that old anyway.

The Geforce 4 MX4000 is an old card... DX7 open GL 1.2

actually the Nvidia drivers for the old work fine.

The Geforce 4 MX4000 is an old card... DX7 open GL 1.2

actually the Nvidia drivers for the old work fine.

This is what I get when I use aptitude to search for proprietary nVidia drivers on Ubuntu 12.04:


$ aptitude versions '^nvidia[-]([0-9]+$|current$)'
Package nvidia-173:
p 173.14.30-0ubuntu11 precise 500
p 173.14.35-0ubuntu0.2 precise-security,precise- 500

Package nvidia-173:i386:
p 173.14.30-0ubuntu11 precise 500
p 173.14.35-0ubuntu0.2 precise-security,precise- 500

Package nvidia-96:
p 96.43.20-0ubuntu6 precise 500

Package nvidia-96:i386:
p 96.43.20-0ubuntu6 precise 500

Package nvidia-current:
p 295.40-0ubuntu1 precise 500
p 295.40-0ubuntu1.1 precise-security,precise- 500

Package nvidia-current:i386:
p 295.40-0ubuntu1 precise 500
p 295.40-0ubuntu1.1 precise-security,precise- 500
[/CODE]

I'm guessing you are using version 96 or 173, probably not 295. Although it would be pretty cool if I'm wrong; that would prove nVidia has much better old hardware support on Linux than I thought. (Aptitude would show 'i' or 'v' instead of 'p' if you have the package installed.)

This is what I get when I use aptitude to search for proprietary nVidia drivers on Ubuntu 12.04:

$ aptitude versions '^nvidia[-]([0-9]+$|current$)'

Package nvidia-96:

p 96.43.20-0ubuntu6 precise 500

Package nvidia-96:i386:

p 96.43.20-0ubuntu6 precise 500

#sh NVIDIA-Linux-x86-96.43.20-pkg1.run[/CODE]

[/font][/color]

http://www.nvidia.co....20-driver.html

And should I decide to- that will even do the "compiz cube spin"

cube1.png

I don't use the new layout -- still love the old Gnome.

What is the best at the time of purchase.

I've owned both nvidia and Ati/amd video cards. Amd, and intel cpu systems. I figure out what I'm going to spend, look at both ati/nvidia cards in that price range, and buy the one that gives me the best performance (for what I'm wanting to spend).

I do the same thing with amd cpu's,however you reach a certain point that amd has no equivalent in terms of performance of the intel version on the higher end of the processors.

#sh NVIDIA-Linux-x86-96.43.20-pkg1.run[/CODE]

[/font][/color]

http://www.nvidia.co....20-driver.html

I see. So you are using a legacy proprietary driver, just not the one from the repository.

While downloading drivers and other software directly from the vendor's website is common practice on Windows, it is not recommend in most Linux distributions unless the software is not in the repository (and sometimes not even then). As you can see from your aptitude output, you can install nvidia-96 directly from the repository. (It is far less likely to cause breakage, will get updates with your other software, and will hook into DKMS properly.)

Despite the fact that you [i]can[/i] install an obsolete proprietary driver for your video card, you will likely get better performance with the open-source nouveau driver. While I don't have exactly the same card as you, I can verify that nouveau performs well on a GeForce 4 series card. However, there are a couple of packages that you will need to install so nouveau can get full 3D acceleration. Install [i]libgl1-mesa-dri-experimental[/i], [i]xserver-xorg-video-nouveau[/i], and [i]nouveau-firmware[/i] (if you're using Ubuntu or Linux Mint) or [i]firmware-linux-nonfree[/i] (if you're using Debian). Obviously, you will also need to remove the proprietary driver first so there are no driver conflicts.

I don't use the new layout -- still love the old Gnome.

If you really like GNOME 2, you should check out MATE. Basically, it is a project based on the last released version of GNOME 2, plus additional enhancements. Their goal is to continue development of GNOME 2 where the GNOME Project left off. Eventually, they plan to integrate GTK3 support and other newer technologies while still retaining the look-and-feel of GNOME 2.

Instead of sticking with Ubuntu 10.04 forever, you should consider upgrading to a newer version of Ubuntu (or another distribution). Your desktop environment preference doesn't have to hold back the rest of the software on your system. I installed Debian Wheezy on my laptop, selecting the XFCE desktop environment during the installation so a lightweight desktop environment would be installed with the default applications. Then, I added the contrib and non-free repositories and installed the proprietary firmware to make all of my hardware work. Finally, I added the MATE Debian repository to my [i]sources.list[/i] using the instructions in the MATE wiki and installed [i]mate-desktop-environment[/i] from the repository. After reboot, I selected MATE as my default desktop environment from the LightDM login manager and have been using it ever since.

This topic is now closed to further replies.
  • Posts

    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.1 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) Download: AltSendme 0.4.1 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You are mostly right about the ephemeral nature of it. As I mention in the article, if you dont add a second device or take a backup of your account before uninstalling it, then yes you will lose access to your account. That said, in terms of actual user experience when you sync multiple devices your message history carries across and there's also a Saved Messages chat like there is on Telegram to send messages and attachments between your installs. But yh, what you point out are correct and its not trying to emulate Messenger or Telegram.
    • OK so SearXNG is a meta search engine that you can install locally or use via a public instance. It scrapes other search engines which you choose and then sorts the results. Not as complicated as multiple relays
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      492
    2. 2
      +Edouard
      224
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!