Recommended Posts

Many users on here using WIFI on their home desktop computer vs Ethernet?

Reason I ask, Most of my WIFI gadgets (Stereo, xbox, boxee, etc) are in the living room. My desktop is in my bedroom. My signal strength in the living room is about 40%

I just bought a wireless bridge ( http://microcenter.com/product/357929/4_Port_Wireless_N__Ethernet_Media_Bridge ), and was thinking of hooking that into my ethernet port on my mb (to become wifi), and move the cable modem/router to the living room.

I assume most users on here try to avoid WIFI on their main desktop pc due to lack of speed vs wired?

Link to comment
https://www.neowin.net/forum/topic/1110453-wifi-on-home-pc/
Share on other sites

what router do you have Brando?

also I recommend NETGEAR wireless products for consumer level and EXTREME NETWORKS for enterprise level.

I recommend you get one that has the USB extension cable and get one that's large, not those compact ones those are weaker and made for looks.

I have one of the "crappier" NETGEAR wireless USB sticks w USB ext. and it works fine for streaming...

It helps to have a repeater setup as well. having those is better then having one powerful router. mesh wireless is even better and lots of hotels and conference centers use those.

Many users on here using WIFI on their home desktop computer vs Ethernet?

Reason I ask, Most of my WIFI gadgets (Stereo, xbox, boxee, etc) are in the living room. My desktop is in my bedroom. My signal strength in the living room is about 40%

I just bought a wireless bridge ( http://microcenter.c...et_Media_Bridge ), and was thinking of hooking that into my ethernet port on my mb (to become wifi), and move the cable modem/router to the living room.

I assume most users on here try to avoid WIFI on their main desktop pc due to lack of speed vs wired?

There are indeed uses for Wi-fi on desktops - especially if you do some of your computing in a room that is impossible or cost-prohibitive to wire.

I have a 42" FP plasma in my bedroom (which, due to the screen developing a black bar down its center, will be replaced at some point) that I sometimes used as an alternate screen (for seriously wide-screen computing, as it also supports HDMI/720p). For 720p, wireless-N is plenty for nonshooter/non-MMO MP (and even MMO MP on small maps) - even low-band N; however, at 1080p and on busier maps and higher loads, wired IS better due to lack of lag.

I use HomePlug wherever possible as I didn't put CAT5e/6 in the walls when I moved in (which in retrospect was a mistake), devices which move around (such as my laptop, tablet and smartphones) are on WiFi.

I find HomePlug much more reliable than WiFi.

I use HomePlug wherever possible as I didn't put CAT5e/6 in the walls when I moved in (which in retrospect was a mistake), devices which move around (such as my laptop, tablet and smartphones) are on WiFi.

I find HomePlug much more reliable than WiFi.

Never heard of homeplug. Ill research it. Can it be bought locally?

There is only 1 use for wifi, that is MOBILE devices. Or devices that just do not have a lan interface, If the device stays in one place - run a wire to that place!!

If your in a building where you can not run cable, you rent for example - then homeplugs would be better than wifi yes.

But if your home - run a wire!! Then put in a switch where you need to connect multiple devices. This is what I have running to my living room where my A/V cabinet it.

Is homeplug a brand or a technology? I noticed best buy sells a Actiontec 500 Mbps Powerline Home Theater Network Adapter Kit. Same thing?

http://www.bestbuy.com/site/Actiontec+-+500+Mbps+Powerline+Home+Theater+Network+Adapter+Kit/5215483.p?id=1218625358741&skuId=5215483&st=homeplug&cp=1&lp=1

powerline adapters is another term, but homeplug is not a brandname

http://en.wikipedia.org/wiki/HomePlug

https://www.homeplug.org/home/

yeah that link you provided to bestbuy is a homeplug/powerline adapter - connect to your router lan on one end, put a switch on the other end if you need multiple ports on the other end.

powerline adapters is another term, but homeplug is not a brandname

http://en.wikipedia.org/wiki/HomePlug

https://www.homeplug.org/home/

yeah that link you provided to bestbuy is a homeplug/powerline adapter - connect to your router lan on one end, put a switch on the other end if you need multiple ports on the other end.

Thanks. Notice most of them are singles. Have 3 devices that would need to plug into it (xbox, av receiver, Dish Hopper). So Ill hunt around.

Wired desks where possible ,wireless for mobile devices . I am using a relatively cheap Rosewill EasyN400 , and havn't had a single glitch in over 2 years with it . I use it for hardware firwall and port forwarding etc. It is a surprisingly fully featured device , and easy to do firmware updates .

I believe they are all going to be singles.. Don't think I have every seen one with built in switch.

You just connect a SWITCH to the powerline adapter if you need more ports.

Let me guess you never heard the term switch either ;)

http://en.wikipedia.org/wiki/Network_switch

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft's fast coding model MAI-Code-1-Flash comes to Copilot Business and Enterprise by Karthik Mudaliar Microsoft’s recently announced MAI-Code-1-Flash model is now generally available to GitHub Copilot Business and Copilot Enterprise customers. With this support, organizations can have more centralized policy controls and billing while finally being able to use Microsoft’s lightweight, first-party coding model. According to GitHub’s announcement, Business and Enterprise plan administrators must enable the MAI-Code-1-Flash policy in Copilot settings before developers can access the model. Microsoft says that MAI-Code-1-Flash is for fast, iterative coding work rather than the most demanding architectural or debugging tasks. GitHub’s official model comparison page says that the model is great for "general-purpose coding and writing," while it excels at fast, accurate code completions and explanations Microsoft introduced MAI-Code-1-Flash on June 2 as part of a broader collection of internally developed MAI models. GitHub subsequently expanded support to Copilot CLI, the Copilot cloud agent, GitHub.com chat, GitHub Mobile, Visual Studio, JetBrains IDEs, Eclipse, and Xcode, but said support for managed Business and Enterprise customers was still on the way. In Microsoft’s own benchmark testing, MAI-Code-1-Flash scored 51.2% on SWE-Bench Pro, compared with 35.2% for Anthropic’s Claude Haiku 4.5. Microsoft also claimed that the model used up to 60% fewer tokens on SWE-Bench Verified. Do note that these are vendor-run results rather than independent measurements. The model is billed at provider list pricing under GitHub’s usage-based system. GitHub currently lists MAI-Code-1-Flash at $0.75 per million input tokens, $0.075 per million cached input tokens, and $4.50 per million output tokens. For organizations, the main incentive to use MAI-Code-1-Flash is likely to be efficiency rather than maximum capability. A smaller model that responds quickly and limits unnecessary output is quite useful for repetitive agent tasks at scale, especially after GitHub Copilot’s move toward usage-based billing. The "Flash" model is recommended for fast work and not necessarily for huge repositories with loads of context. It's better if teams compare their output with other larger models, especially if they're working on security-sensitive changes and complex, multi-file work.
    • yes AND no the "original" or plain/normal Optiplex 7010 won't be getting any more new firmware updates BUT the Optiplex SFF/SFF Plus {small form factor}, Micro/Micro Plus & Tower/Tower Plus 7010 editions DO get new updates such as this new one   and here are similar guides from the Dell web site for Dell systems: https://www.dell.com/support/kbdoc/en-us/000390990/secure-boot-transition-faq https://www.dell.com/support/kbdoc/en-us/000347876/microsoft-2011-secure-boot-certificate-expiration
    • AT&T has been spying on US citizens with the NSA for decades.. they just know how to keep it more under wraps.. the evil level is still there.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      445
    2. 2
      +Edouard
      201
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!