Recommended Posts

so i have IE and chrome installed on a lenovo laptop with 8gb ram and a i3 processor.

ive noticed recently that opening several tabs in chrome causes it to stall. So all the opened tabs never really load pages, just like you're viewing via a 56kps modem!!! after a few minutes it does load, but the sites are nearly impossible to use, the scrolling is slow as hell.

howwever the rest ofthe computer is fine.

i thought the ram may be corrupt so changed that, reinstalled flash but and cleaned up the browesrs, still no better :( any suggestions as to whats happening?

Link to comment
https://www.neowin.net/forum/topic/1110607-whats-wrong-with-my-browsers/
Share on other sites

so i have IE and chrome installed on a lenovo laptop with 8gb ram and a i3 processor.

ive noticed recently that opening several tabs in chrome causes it to stall. So all the opened tabs never really load pages, just like you're viewing via a 56kps modem!!! after a few minutes it does load, but the sites are nearly impossible to use, the scrolling is slow as hell.

howwever the rest ofthe computer is fine.

i thought the ram may be corrupt so changed that, reinstalled flash but and cleaned up the browesrs, still no better :( any suggestions as to whats happening?

Out of curiosity do you have windows 8 installed? If not... try to disable flash plugin, I also exactly the same issue and I'm trying to pin point the problem...

no just windows 7.

fyi sorry about the typos' was typing when the computer went all m25 clockwise traffic gangdum style

i deleted all extensions/addons for chrome and IE

cpu is fine, it can happen seconds after starting up to hours into laptop usage.

also it's good to keep track of I/O reads and writes... enable those columns in task manager and keep an eye out and try to minimize usage of that. also have the delta enabled as well... when stuff gets too out of hand kill it...

I know when I used WMP my Page fault delta and I/O reads were high as hell.... like 6x more then jriver media jukebox.... I got tired of my drive grinding like enrique iglaseas!!!!

also ... STAY AWAY FROM REALPLAYER/REALDOWNLOADER!!! those have high I/O as well

spoolsv.exe is pretty bad about that as well....

also it's good to keep track of I/O reads and writes... enable those columns in task manager and keep an eye out and try to minimize usage of that. also have the delta enabled as well... when stuff gets too out of hand kill it...

I know when I used WMP my Page fault delta and I/O reads were high as hell.... like 6x more then jriver media jukebox.... I got tired of my drive grinding like enrique iglaseas!!!!

also ... STAY AWAY FROM REALPLAYER/REALDOWNLOADER!!! those have high I/O as well

spoolsv.exe is pretty bad about that as well....

What is "the delta" by the way?

What is "the delta" by the way?

The change in the number of page faults since the last update

WMP's P/F Delta stayed around 2,000-8,000 and spiked to 15,000 sometimes....

(My music would start stuttering and needing to buffer a good bit when it spikes up a lot)

JRMJ's P/F Delta stays around 250-500 and spikes to 1,300 sometimes....

(very rarely does my music stutter or need to buffer)(JRMJ also has a "play files from memory instead of disk" option but I don't use this)

and I use even larger playlists with JRMJ then I do with WMP.

Chrome spikes to 15,000 loading all 22 tabs resuming from sessions... hovers around 500.

How does yours look?

The change in the number of page faults since the last update

WMP's P/F Delta stayed around 2,000-8,000 and spiked to 15,000 sometimes....

(My music would start stuttering and needing to buffer a good bit when it spikes up a lot)

JRMJ's P/F Delta stays around 250-500 and spikes to 1,300 sometimes....

(very rarely does my music stutter or need to buffer)(JRMJ also has a "play files from memory instead of disk" option but I don't use this)

and I use even larger playlists with JRMJ then I do with WMP.

Chrome spikes to 15,000 loading all 22 tabs resuming from sessions... hovers around 500.

How does yours look?

Firefox spikes to 11000... but so far most of the times keepts at 100.

That's not too bad....

Thank you for the delta PF, it's just what I was looking for, for some reason my browser has not frozen though... but if I see something like that now I know where to check it :D

Thank you for the delta PF, it's just what I was looking for, for some reason my browser has not frozen though... but if I see something like that now I know where to check it :D

Ha ha... No problem-o ;-)

I watch over it more and am kinda anal about it cuz my music stutters when that kinda thing spikes high and when it stutters it's very annoying!!!!

  • 1 month later...

where is this in the settings?

Don't remember. Not on my pc at the moment I'm on business trip away from home so...sowwy can't tell yah now just Google it for now

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ridiculous claim that the labor cost difference of $6000 annually would increase cost per phone by $200. The employees produce 3 phones per month or what?
    • Sparkle 2.20.1 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.1 changelog: You can now change the Animation Direction from Up, Left, or Off. Added configurable animation direction (Up, Left, Off) for improved accessibility Added TTL caching to the system info backend Refactored tweak application flow to await NvidiaProfileInspector Improved IPC listener cleanup to correctly remove specific listeners Fixed online status not updating after successful network requests Updated system info tests to support backend caching Removed electron-toolkit utils dependency in favor of internal is.dev helper Fixed unwanted files and folders being included in application bundles Download: Sparkle 2.20.1 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Never used the G7 Pro, but I've never had a good experience with that style of d-pad and fighting games.
    • And I just bought a seat cushion for my mesh chair. The chair feels nice but the first time I sat in it with boxers, I realized I don't like the feel of mesh on my legs. 😂
    • "This Dell 27 inch 4K 120Hz IPS monitor is really cheap after a very long time" ... Lol.
  • Recent Achievements

    • Dedicated
      Asgardi earned a badge
      Dedicated
    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      +Edouard
      247
    3. 3
      PsYcHoKiLLa
      153
    4. 4
      Steven P.
      84
    5. 5
      macoman
      64
  • Tell a friend

    Love Neowin? Tell a friend!