Upgrading RAID5: Destroy it or leave it as is and upgrade


Recommended Posts

Finally readying to do the upgrade :)

Last question: On controller 1, I have my current RAID5. I have to the drives as physically I have no space to put the new HDDs. Should I go into the controller 1's BIOS and destory it or just leave it as is, remove the drives, put in the new ones plugged into controller 2 and make the new RAID5 on controller 2's BIOS?

Thanks

Since it does not matter, what do you think is the best option you will pick?

There is a reason I asked Neowin :p

Personally, Id leave it alone; In theory if I remove the disks and replug them all in one day, the RAID5 would still work since it isnt missing any members. I just hope it doesnt nag about it.

So should I just remove the drives and thats it? I want to start the initialization of the new RAID5 as it takes time so please ASAP....

You don't have "Fast Initialize" on your controller? I'm doing an upgrade/switcharound today too and I did my initialize in less than 60 seconds :D

I would just plug in the new drives and build a new array since i'm guessing you aren't worried about data.

Also i'm switching away from RAID5 - how many drives are you using? :)

I would just plug in the new drives and build a new array since i'm guessing you aren't worried about data.

Theres the problem: One of the drives of the new RAID5 contains ALL of the data of the old RAID5. I copied it. So I cant "initialize" it because it says it will erase all the data.

I also have another issue now: Since I put in the new RAID5 controller, now I cannot boot off my boot drive (on another controller). Doesnt give me the optioon.

Having said that, this is a issue Ive read so....

You had a old RAID with your stuff on it before so why move it off to a new drive?

Ok so do you have three drives out of four not in use right? If so make a RAID 5 with three then move your data to the RAID 5 and then add the drive to your RAID 5 by expanding the array.

You had a old RAID with your stuff on it before so why move it off to a new drive?

Ok so do you have three drives out of four not in use right? If so make a RAID 5 with three then move your data to the RAID 5 and then add the drive to your RAID 5 by expanding the array.

Lets see as I might have made a mistake or misunderstood you :)

I had a RAID5 (lets say) 200 GB x 4. About 600 GB

I bought 3 TB x 4. About 9 TB

I transfered all of the 600 GB to ONE of the 3 TB

What should I do now? Continue please :) As I didnt understand you correctly, sorry

Make a RAID 5 with the three 3TB drives move date from your one 3TB to the array and expand the array by adding your 3TB to it.

OK :) Now I understood you! :) Thanks for the tip.....

I still have that small boot error Id like to fix before actually doing this

Make a RAID 5 with the three 3TB drives move date from your one 3TB to the array and expand the array by adding your 3TB to it.

I feel stupid asking this but I dont find this option anywhere....The only place is a "Spare Pool" but it doesnt relate it to my RAID5.....

Then it does not have that feature unlike the Intel RAID.

You go and get 4x3TB blank drives

https://www.neowin.net/forum/topic/1110205-just-spent-58798-euros-to-upgrade-my-raid

You then want a RAID card to which I said you be much better off using the Intel RAID.

https://www.neowin.net/forum/topic/1110259-recommend-a-raid5-pci-or-pci-e-card

You have booting problems because your old RAID was boot drive with your OS on another drive

https://www.neowin.net/forum/topic/1113575-installed-raid-controller-cant-boot-off-other-controller/

You go and use one of them 4x3TB blank drives and move your date off your old RAID to it

https://www.neowin.net/forum/topic/1113553-upgrading-raid5-destroy-it-or-leave-it-as-is-and-upgrade/

Your not making things easy with that last thing considering you intended to make a RAID with them 4x3TB blank drives from the start.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Segra 1.6.3 by Razvan Serea Segra is a free, open-source OBS-powered game recorder offering fast gameplay capture, instant clips, AI highlights, deep game integration, and seamless uploads—perfect for gamers, streamers, and content creators. Lightweight, fast, zero bloat. Segra key features: Automatic Game Recording: Begin capturing gameplay the moment your game launches, with zero manual setup. Instant Clipping: Save important moments instantly using a customizable hotkey—perfect for highlights, montages, or quick shares. Segra AI Highlights: Let Segra automatically detect kills, assists, deaths, and key events to generate polished highlight reels without manual editing. Gameplay Uploads: Upload recordings and clips directly to Segra.tv for fast sharing and cloud access. Deep Game Integration: Enjoy advanced game-data tracking across hundreds of supported titles, enabling smart highlight generation and stat-informed clipping. High-Performance Capture: Record up to 4K at 144 FPS using OBS-powered technology with minimal performance impact, supporting NVENC, AMD VCE, and custom quality controls. Segra Editor: Edit recordings easily with timeline controls, segment management, and event-based navigation to build the perfect clip. Customization Options: Adjust hotkeys, output formats, storage paths, codecs, capture quality, and performance settings for a tailored recording experience. Segra 1.6.3 changelog: Recording: Reworked the whitelist/blacklist into per-game recording with individual setting overrides. Settings: Added Windows Game Mode and Startup window mode options. Audio: Improved noise suppression for microphone capture. Clips: Added a separate export mode for segment clips. Updates: Fixed pending update state not showing by replaying it when the frontend reconnects. Recording: Fixed an issue where audio could break or sources could linger between recordings. Stability: Fixed a rare crash that could happen when a game closed. Settings: Fixed settings not applying correctly on some non-English systems. Download: Segra 1.6.3 | 74.5 MB (Open Source) View: Segra Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • So, recently, I saw on the news (yes, on this website) that Samsung is introducing features where it can provide education using AI-powered sets, and because of this, I got concerned about whether the AI gives out wrong info during education sessions, causing controversies in the process. What are your thoughts on this? 
    • TCL's Bang & Olufsen soundbar is 40% off on Amazon by Ivan Jenic The TCL Design Series A65K is currently $299.99, down from $499.99. That's 40% off and $200 saved on a soundbar tuned by Bang & Olufsen, which is not a combination you'd normally expect at this price point (purchase link below). Bang & Olufsen doesn't typically show up in the sub-$500 category. The Danish audio brand is known for speakers that cost several times more, so having their acoustic tuning on a $300 soundbar is very appealing. TCL handles the hardware, B&O handles the sound engineering, and the result is what the company calls "accessible luxury." Still, accessible luxury isn’t full-fledged luxury, so don’t expect wonders. But this is a decent soundbar, nevertheless. The A65K is a true 3.1.2 channel system with nine physical drivers, including genuine up-firing height speakers for Dolby Atmos and DTS:X. Many soundbars at this price simulate overhead effects through virtual processing, rather than actual hardware. So, you’re getting the real deal. The design is unusually slim for a system with Atmos compatibility. The bar is just under 2 inches deep and should fit beneath most TV screens. The wireless subwoofer is also compact at roughly 14 x 14 x 5 inches. Total output is 460W, and you can connect to the soundbar via HDMI eARC, Bluetooth 5.3, or USB. There are also eight sound modes through the TCL Home app and an AI calibration capability. Although it’s worth mentioning that AI capabilities in most of these devices are inconsistent, to say the least, and that shouldn’t be the biggest selling point. Still, at $299.99, the A65K is a strong buy for anyone who wants a soundbar that sounds and looks noticeably better than what this price range usually offers. And the Bang & Olufsen branding surely sounds nice - pun intended. TCL Design Series Bang & Olufsen A65K - $299.99 | 40% off on Amazon Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • And he paid Joe Rogan $30M for podcasts. Terrible company.
    • I sure hope the AI does not give out wrong info during education
  • Recent Achievements

    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
  • Popular Contributors

    1. 1
      +primortal
      529
    2. 2
      +Edouard
      263
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      96
    5. 5
      macoman
      60
  • Tell a friend

    Love Neowin? Tell a friend!