Opened up my PS3 and reapplied heatsink paste


Recommended Posts

Just a friendly topic to say I finally cracked open my PS3 Slim tonight, cleaned out the dust, and then put new paste on my heatsinks. I have to say the default application from Sony in the factory is weak - I redone mine with IC Diamond 7.

Seems to be running a little quieter, but that will probably be mostly to do with dust clean out.

Wasn't a hard job at all, simply a little time consuming to take it at a slow pace.

yeah it's really simple. how old is your slim? it takes a few years for that stuff to dry up.

About 2 years (maybe 2.5-3 years actually?). It wasn't half dried up, crumbling and looked like a pretty uneven application to start with.

edit: The PS3 Slim was bought about 2 months after the US launch, whenever that was - It's a US console imported to UK.

I've noticed recently my slim has started to make a slightly different noise from the fan, which I'm sure is dust build-up causing a slight imbalance. Been meaning to give at a clean, might crack it open this weekend. Any idea what size the fan is? I might consider replacing it entirely for a quieter PC fan if it's not too incompatible.

  • 2 weeks later...

Hmmm, after reading this thread, think I might just clean my PS3's just to clean them.

However the other part of me is thinking just leave well enough alone, as they both seem fine. I do also usually blow compressed air on them at least once a month, if not more frequently.

I've had my PS3 for a long time, 3 years perhaps, and there was very little dust in mine. It was a bit of fun to take it apart and have a look around inside, but it was entirely unnecessary for the amount of dust I removed. My fan also looked as if it was brand new. I must take better care of my electronics than I thought I did :laugh:

I have a near launch PS3 (roughly March '07) and the first time I had cleaned it out was maybe a year ago and it was surprisingly clean in there. There's a decent amount of spacing between the fins on the heatsink that it doesn't clog with dust really at all. If you used compressed air that will clean it out just fine, and going any further would likely not be worth the time/effort. I also keep my apartment a lot cleaner than most, if not everyone I know, so maybe that plays some sort of role as well.

I had taken mine apart because the fan was starting to ramp up quicker than it used to, so figured that I'd give it a good cleaning as it had been a while. Turns out it wasn't really dirty at all inside but the thermal paste was pretty dried up (and I ended up sanding down the heatsink further as it wasn't as flat as I would've liked, but that's me being a bit OCD). Definitely noticed a difference afterwards but I'm quite sure it's because of the better thermal contact with the CPU/GPU as the previous paste was kind of crappy.

  • 4 weeks later...

I've read there's no real point replacing the heatsink paste because the chips don't even touch the heat plate. Sure cleaning the dust out is fine but unless you pull the heat plate off the processor and GPU (which is really dangerous) there's no benefit to replacing the paste cause there is even more paste underneath the heat plate.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • My experience in the past with older Windows 11 builds was not great on unsupported machines but I recently used Rufus to put the latest build on a older 5th Gen Core Thinkpad T that we upgraded with a SATA SSD and 8GB of RAM four years ago when hardware was reasonable and it seemed pretty fast and solid. Customer is very happy with the performance and will probably get four more years out of that venerable laptop that he loves so much. Another customer just retired his Dell Studio laptop from 2009 running Windows 10. It got an SSD over 10 years ago and did everything he needed it to for 17 years but he also retired last year and is happy doing everything on his iPad now.
    • Apple's newest AirTag 2 gets first big discount by Taras Buria In late January 2026, Apple introduced its second-generation AirTag trackers, bringing a refresh to the old model that has been on the market for half a decade. Now, you can get these new trackers at an all-time low price, thanks to the first big discount that brought the price down by 17% on Amazon. While the second-generation AirTag looks identical to its predecessor, it packs meaningful upgrades inside. The second-gen ultrawideband chip works 50% farther than the original AirTag, allowing you to detect lost items in a wider range. In addition, the second-generation AirTag features an upgraded Bluetooth chip for extended range and a significantly louder speaker (up to 50%) so that you can hear it better when locating a lost item. Note that the second-gen AirTag only works with iPhones and iPads that run iOS/iPadOS 26 and newer, so you need a compatible device to use the tracker. Like the original AirTag, the AirTag 2 is available in two packs: one and four pieces. Both are now available at a notable discount on Amazon, and you can purchase them using the links below. Apple AirTag 2 tracker - $24 | 17% off on Amazon Apple AirTag 2 tracker (four-pack) - $89 | 10% off on Amazon Good to know This Amazon deal is U.S.- specific and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • I've been on Deezer for over a decade, but glad that Tidal joined them in fighting AI slop. Can't stand such takes as Spotify's: "Spotify's CEO recently pushed back against listeners who call AI music "slop," urging people to stop using the term and instead embrace the creative potential of AI music."
    • “Could” … in the IS the healthcare is run by insurance companies that make indecent profits denying basic treatments to people that are paying money for nothing. Besides, where are all the Trump epigones who were stating that the tariffs were going to paid by foreign companies and not the US citizens? …
    • Microsoft Teams gets smarter at spotting sneaky meeting bots by Usama Jawad Microsoft Teams is set to receive a couple of new features soon, including a dedicated Recap app and a rather controversial location tracking functionality. The Redmond tech giant has also explained how it has made online communication and collaboration a lot more performant this year. Now, the company has detailed more secure bot admission mechanisms, as first reported by us in March 2026, and now available in Teams. As the use of AI has expanded across enterprise environments, Microsoft has begun allowing users to integrate bots into their meetings for various tasks, such as note-taking. While this has a tangible productivity benefit for users, Microsoft has highlighted how misconfiguration has allowed bots to join meetings that they shouldn't. This has created security and privacy risks, which Microsoft is now combating using a new Teams admin policy that allows organizers to control how external bots access meetings. Admins can leverage a policy called Manage external bots and their access to meetings. The default configuration is "When detected, require approval before joining", which places detected bots in a lobby before they are explicitly admitted into the meeting. The other option disables the experience. Microsoft has also requested admins to only allow organizers and co-organizers to manage access to a meeting, so that other people don't randomly allow bots into meetings. Teams will now be able to leverage infrastructure signals to intelligently detect and distinguish between bots and humans. Microsoft will soon also trial a registration experience for independent software vendors (ISVs) to build a system that registers a bot with Microsoft, so it is marked as a "known" bot. Teams will also categorize bots as trusted and suspected threats so that organizers can quickly identify which bots they want to allow into a meeting. Additional safeguards to block accidental admission of a bot into a meeting include: No one-click Admit option for identified bots Confirmation prompts when admitting participants that include bots Warnings when organizers choose Admit all, and bots are included Microsoft has begun rolling out this experience, and it will be retiring the current CAPTCHA verification implementation. In the future, the company plans to roll out new capabilities like allow-lists, organization-wide policies, admin reports, audit logs, and more granular controls.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      538
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!