iPhone 4/4S + otterbox case + screen protector = your view?


Recommended Posts

Has anyone put an otterbox case on their iPhone which already has a screen protector on it?

Just wondering if the protector bubbles due to it sitting right near the edges. The wife has a Galaxy S3 but her screen protector doesn't sit as close to the edges & as a result her otterbox case doesn't make the screen protector bubble.

Don't know anyone who has one for their iPhone though.

Has anyone put an otterbox case on their iPhone which already has a screen protector on it?

Just wondering if the protector bubbles due to it sitting right near the edges. The wife has a Galaxy S3 but her screen protector doesn't sit as close to the edges & as a result her otterbox case doesn't make the screen protector bubble.

Don't know anyone who has one for their iPhone though.

I had a SGP Ultra on, then an otter box defender. It didn't bother me at all. Though, since I had to get a refurb Iphone, I only have the otterbox display protector :-(.

Kinda doesn't help though. I like the 'flimsy' screen covers.

In the 2 years i owned my 3GS i always had one on. They fitted well - with no bubbles at all, which meant i didn't notice they were even on (so if i don't notice it then i can't not like it). When they got too scuffed or whatever, i'd change them.

So really need to know how they fair with the otterbox case on as well (ideally the commuter case), as i have until the weekend to switch my 4S for an S3, by which point i'm out of time & would have to stick with the 4S.

Got 3 Iphone 4's (one for wife, kid, myself) and 3 of the otterbox defenders. Daughter has wrecked the case and have replaced it once. Phone is pristine. Wife's phone got dropped down the stairs at the Disneyland parking structure and survived w/o any problems with the phone itself! Neither have had any issues with the screen protector. so A+ in my book!

The only issue it does have is the rubber tends to stick to my pockets a bit when so always having to tuck my pockets back in. Small annoyance.

I have purchased a couple defenders. 1 for each iPhone. 3GS, 4s, 5. On my 3GS, I had already purchased an invisishield before I bought the otterbox, and did not want to loose the protection the invisishield gave the phone, so I actually popped the screen protector that was on the otterbox off. Its actually just attached with a thin glue type substance, very easy to remove and clean. The only downfall I had, was the invisishield is kinda "rubbery" and with the otterbox fitting so tight on the 3GS it caused it to leave indention's in the screen protector on the 4 corners where the case and the screen meet. It did not scratch my screen at all or cut through the screen protector, but it left indention's in it. I have since gotten away from using invisishield because I just hate the way they feel.

As far as on the 4s and the 5. I kept the screen protector that came with the otterbox on and used that with no issues. I did however put a defender on my wifes 4 one time when she already had a screen protector on it and it looked horrible. It didnt bubble, but it had this layer of oil look. I cleaned the crap out of both screen protectors inside and out to see if it helped but it didn't.

So I would say. If you have a nice anti glare or expensive screen protector on your phone already. Leave it and pop out the otterbox screen protector. If not, then just take the screen protector off your device and use the otterbox one.

I don't buy expensive protectors. I bought a pack of 10 for my 3GS from eBay for ?1-?3. Nice & cheap but did the job.

Is the otterbox protector any different from these cheap screen protectors? For the record i don't buy the anti glare ones either. I had one of those once & thought it was horrible.

I also wont be buying the defender if that makes much/any difference? It'd be the less bulky commuter i'd be buying.

I don't buy expensive protectors. I bought a pack of 10 for my 3GS from eBay for ?1-?3. Nice & cheap but did the job.

Is the otterbox protector any different from these cheap screen protectors? For the record i don't buy the anti glare ones either. I had one of those once & thought it was horrible.

I also wont be buying the defender if that makes much/any difference? It'd be the less bulky commuter i'd be buying.

I bought my and my wife's iPhone 4s just before the 5 was released and got an Otterbox for each of them. I would have preferred to just get a screen protector because the Otterbox does bulk up the phone considerably imho. Sometimes it even makes it uncomfortable to hold. The reason for buying the Otterboxes though is because I have twin 3 (almost 4) year old boys that tend to find ways to get their hands on the phones. They aren't nearly as careful with them as my wife and I are. They have been great from the protection standpoint but the area around the font and back cameras get really dirty and require the occasional removal of the phone to clean up. In my situation I wouldn't trade them for anything else at the moment however as I said, I would much rather have just had a screen protector if not for the kids.

On another upside note the Otterbox does come with a click-in belt carrier that servers a dual purpose. The belt clip can act as a nice stand in different configurations if you leave you phone attached to it and can prop your phone at various viewing angles from both a portrait and landscape perspective. The clip can lock into the open position to further modify the viewing angles.

Overall it is a nice protective device for the money but that doesn't change my preference of the bare phone with just the screen/back protector on it.

Good luck on your decision.

I bought my and my wife's iPhone 4s just before the 5 was released and got an Otterbox for each of them. I would have preferred to just get a screen protector because the Otterbox does bulk up the phone considerably imho. Sometimes it even makes it uncomfortable to hold. The reason for buying the Otterboxes though is because I have twin 3 (almost 4) year old boys that tend to find ways to get their hands on the phones. They aren't nearly as careful with them as my wife and I are. They have been great from the protection standpoint but the area around the font and back cameras get really dirty and require the occasional removal of the phone to clean up. In my situation I wouldn't trade them for anything else at the moment however as I said, I would much rather have just had a screen protector if not for the kids.

On another upside note the Otterbox does come with a click-in belt carrier that servers a dual purpose. The belt clip can act as a nice stand in different configurations if you leave you phone attached to it and can prop your phone at various viewing angles from both a portrait and landscape perspective. The clip can lock into the open position to further modify the viewing angles.

Overall it is a nice protective device for the money but that doesn't change my preference of the bare phone with just the screen/back protector on it.

Good luck on your decision.

Sorry, I should have mentioned that I did buy the Defender cases. I'm sure they are thicker than the Commuter but I'm not sure if they provide the same level of protection. It also doesn't appear that the Commuter comes with the belt clip so sorry to have included that tidbit.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.1 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) Download: AltSendme 0.4.1 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You are mostly right about the ephemeral nature of it. As I mention in the article, if you dont add a second device or take a backup of your account before uninstalling it, then yes you will lose access to your account. That said, in terms of actual user experience when you sync multiple devices your message history carries across and there's also a Saved Messages chat like there is on Telegram to send messages and attachments between your installs. But yh, what you point out are correct and its not trying to emulate Messenger or Telegram.
    • OK so SearXNG is a meta search engine that you can install locally or use via a public instance. It scrapes other search engines which you choose and then sorts the results. Not as complicated as multiple relays
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      492
    2. 2
      +Edouard
      224
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!