OCZ Agility 3 - Buy or Avoid?


Recommended Posts

I've been looking into getting an SSD for a while, now someone I know's offered me a 120GB OCZ Agility 3 for around ?50, so obviously I'm tempted. Is it a good buy though? I've read a few SSD guides online before, and the summary of them was to stick to either the Crucial M4 or the Samsung 830. Would it be best for me to keep waiting and go with either of those instead?

The other concern I have with buying an SSD is cloning my drive over to it. My current system HDD is 1TB, so obviously, I'd have to create a second partition on it, and then go back-and-forth moving files over and decreasing the main partition size until it's small enough to fit on the SSD, but would it be safe if I cloned my system to an SSD? My friend recommended doing a fresh install onto the SSD, but I don't really fancy going through all the hassle of setting everything up and installing everything again unless it's absolutely necessary. Also, I recently did the upgrade from Windows 7 Ultimate to Windows 8 Pro (x64), so I'm not sure if I'd be able to use my serial key again if I had to.

Sorry for all the questions, but thanks in advance to anyone who can answer them.

Link to comment
https://www.neowin.net/forum/topic/1117563-ocz-agility-3-buy-or-avoid/
Share on other sites

I own one, and despite what the OCZ haters say it's been a very reliable drive so far. Granted it doesn't have the raw performance of the Vertex 4 or Samsung 8 series but it's still a very good drive for the price. I wouldn't clone from a mechanical drive to an SSD however I would personally advise doing a fresh install as Windows has to configure itself for optimal running on an SSD and I believe it does that upon install.

  • Like 2

More than likely it will be fine, but it is risky since it runs on SandForce. Honestly, you might as well play it safe and buy a brand new Agility 4 or Vertex 4. I don't think it will be too big of a price difference and then you'll get a warranty with it.

Avoid anything OCZ. They just laid of a bunch of people and are going down probably soon. I have a Vertex 3 and it's good---faster than an HDD, and I'm happy with it, but it could be better. Get the Samsung 830. Don't clone the drive!!! Do a fresh install!!!

  • Like 2

Avoid anything OCZ. They just laid of a bunch of people and are going down probably soon.

OCZ isn't going anywhere. Restructuring is a good thing when the market is down. The Vertex is their prized product and is arguably the best SSD on the market, so you can only expect it to get better since they will be focusing more on it.

If you goto OCZ warranty site, there's option asking if this is your "1st RMA, 2nd RMA, 3rd RMA".

I'm on my 2nd RMA after one died after 3 months and another one dead on arrival.

But Agility and Vertex is their flagship line so it has better chance of working well. But the long term reliability, I'm not willing to risk.

In the meantime, I bought a Kingston Hyper X and it was rated 7.2/7.9 on the windows scale. It is working super good right now.

Definitely avoid OCZ - I have personally had a failure 4 months after I purchased my Vertex, and a few other of my friends had their Vertex2/3's fail. For a company that just switched to making just SSD's, they sure suck at it. They also move the largest amount of drives because they're cheap pieces of ****. I would stick with Samsung 830, or Crucial M4 or Intel SSD's.

One other point to note: The Agility 3 doesn't come with a mounting bracket for a 3.5 inch drive slot so you may need to acquire one separately ;)

If you have to ask the question you probably want to avoid them.

I disagree, this thread on it's own seems to show how polarised people are, often it depends on whose opinions you ask. And I find the best opinions come from people to have used the products.

I have a 240GB Agility 3 in my MacBook Pro (dual booting Windows 7 on it too), and it's been very reliable so far. It's faster than anything I've ever owned, so I wouldn't know how much faster other drives would be (or if it's even a noticeable difference), but I believe the newest firmware fixed any reliability issues it may have had.

I have a 240GB Agility 3 in my MacBook Pro (dual booting Windows 7 on it too), and it's been very reliable so far. It's faster than anything I've ever owned, so I wouldn't know how much faster other drives would be (or if it's even a noticeable difference), but I believe the newest firmware fixed any reliability issues it may have had.

This. As long as you have the latest firmware on the 3 Series, you'll be fine. If you get the 4 Series, you won't have to worry about anything since it uses Indilinx, which is super reliable. Plus a 5 year warranty.

Obviously this all depends on who you talk to. I've build about 50 PCs for a client, many of which with an OCZ SSD. Haven't had a single failure yet with those. I've seen one failure, and it was a Kingston, but I wouldn't say Kingston is less reliable than anything else.

I disagree, this thread on it's own seems to show how polarised people are, often it depends on whose opinions you ask. And I find the best opinions come from people to have used the products.

Every product has failures - that's unavoidable. But, OCZ just has high failure rates, and that should be enough as a consumer to sway you away. Why gamble with a product like an SSD? You're storing information, and it's an inconvenience if it fails. In either case, backup your data regardless of the brand. OCZ's tend to be slightly cheaper than the competition, but I would buy Intel, Crucial, Samsung for a few $ more. Having used an OCZ drive, and seeing it fail (amongst my friends') does not put a good reputation of them in my mind.

But, OCZ just has high failure rates, and that should be enough as a consumer to sway you away. Why gamble with a product like an SSD?

Do you have more than anecdotal proof of this? OCZ has been selling cheap SSDs for a long time, I would expect there to be a fair number of failures. But is it really greater than other drive companies by volume sold? It's hard to say.

Unless someone can point to an actual manufacturing flaw, like the IBM Deathstars, it's hard to say they're actually worse.

Every product has failures - that's unavoidable. But, OCZ just has high failure rates, and that should be enough as a consumer to sway you away. Why gamble with a product like an SSD? You're storing information, and it's an inconvenience if it fails. In either case, backup your data regardless of the brand. OCZ's tend to be slightly cheaper than the competition, but I would buy Intel, Crucial, Samsung for a few $ more. Having used an OCZ drive, and seeing it fail (amongst my friends') does not put a good reputation of them in my mind.

I only use my SSD as a boot drive, all my integral data is stored on mechanical drives so I'm covered on that front, but I've simply not seen anything that tells me using an OCZ drive is a risk. The firmware issues that caused the failures have been fixed as articuno1au pointed out, I know signs of disk failures, I update my firmware for products as soon as it's released and I'm careful. I've never seen evidence that owning an OCZ drive is a bigger risk than any other, you'll always get the odd failure, it's just part of the risk of comupting.

I have yet to have an issue with any of the four OCZ drives I have. My Vertex 2 is two years old, Vertex 3 just over a year and two Vertex 4s are a few months old.

OCZ has the highest failure rates, but its negligible (last time I checked they were within half a percent from Intel). The failure rates of mechanical drives are astronomical in comparison.

Every product has failures - that's unavoidable. But, OCZ just has high failure rates, and that should be enough as a consumer to sway you away. Why gamble with a product like an SSD? You're storing information, and it's an inconvenience if it fails. In either case, backup your data regardless of the brand. OCZ's tend to be slightly cheaper than the competition, but I would buy Intel, Crucial, Samsung for a few $ more. Having used an OCZ drive, and seeing it fail (amongst my friends') does not put a good reputation of them in my mind.

As I like to say... If you didn't have a backup then it wasn't important.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.5 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.5 changelog: Fixes crashes related to audio devices on Windows (DirectSound and ASIO) Fixes several crashes and memory corruption issues Fixes opening several headerless files at once, which previously dropped all but one Improves batch export by suggesting and remembering the destination folder Fixes accented and non-Latin characters in VST plug-in and compressed-archive file names Adds zstd compression support and updates the archive library Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I did think about a Echo show once and it would be useful to see what my cameras see. But my brother got one and I changed my mind. Adverts and not really worth the price just to see my cameras. I have a load of dots and a Echo Gen 4, they will do.
    • I asking where you are from or live, because if you don't live in the U.K, why are you so bothered? That is another reason I voted out, E.U and people poking their noses in where they should not be. Sadly we still have it, Trump, and his cronies. Putin as well and no doubt others. It makes no difference what we believe, if we made the right choice or not, we are out. As I said to someone when the news first broke we have voted out, we just need to make the best of it. I have no problems with closer ties to the E.U, we still need to trade. Just don't want to be in their club.
    • So you think I voted out because i am anti-immigrant. I am fed up with those that come over and think that we owe them something. The ones that are at the moment coming over from France where they are already in a safe country because they think and no doubt will get everything chucked at them. While people who were born and bred here get very little. I have nothing against as i have said before those that come here and work. In fact I know full well that our NHS would struggle without them. I do have a problem with those that come over here and try to push their religion and their way of life onto us. My reasons for voting out was because of what the E.U is and is also becoming. I did not agree with Freedom of movement, not because I don't want people over here, but because people need to be checked before being allowed to cross borders and that goes both ways. But my main thing was because the E.U is becoming if not already a united states of Europe. The only reason countries like Poland and Romania joined was because they had no money. When my partner left Poland, she had nothing, Poland had nothing, that is why she left. Wanted to learn something and earn a living. The E.U would have us back according to Michel Barnier. https://www.euronews.com/my-eu...ator-barnier-tells-euronews Why are you so scared to say what country you are in?
    • I wonder what that line really meant...
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!