Which Service/Process Keeps Restarting My PC Daily?


Recommended Posts

The computers we use at my job run Windows XP Professional. The computers restart at exactly the same time each morning at 5am. What I'm trying to do is learn as much as possible about what is causing the restart so that I can prevent it.

There have been times where I'll be working on a very important project, the computer will restart, and I will lose significant progress. It isn't the sort of work where you can just hit "Save" and continue where you left off after the restart.

If there is a process running that is causing the restart, I want to be able to identify it so that I can "End" it when necessary. If the restart is being caused by a Windows service then I want to be able to identify it so I can "Stop" and/or "Disable" it when necessary.

I will tell you what steps I've taken and what I've learned. I'm hoping that someone can provide some insight or advice on what I should try next.

Note: I have administrative rights. All steps taken were done with admin privileges active.

a) I've tried the "Start>Run>shutdown -a" method in an attempt to halt the restart when it begins. It didn't work. The restart still occurred at 5am.

b) I tried changing the Windows clock in an attempt to delay the restart. It didn't work. The restart still occurred at 5am.

c) I tried disabling the Windows Time service in Control Panel>Administrative Tools>Services. It didn't work. The restart still occurred at 5am.

d) I tried methods b and c simultaneously. It didn't work. The restart still occurred at 5am.

e) I thought that the restart might be triggered remotely so I disconnected the Ethernet cable from the computer. It didn't work. The restart still occurred at 5am.

f) I tried looking into Control Panel>Task Scheduler to see if the restart was a scheduled task. It wasn't.

g) I tried looking more deeply into the Task Scheduler via the command prompt to see if perhaps there was a scheduled task that was being hidden from the Task Scheduler GUI. There wasn't.

h) I tried looking through the list of running processes (over 50) in Task Manager to see if any of the names seemed like they might be related to restarting or shutting down etc. but nothing stood out.

i) I tried making a list of all processes running before 4:30am to see if any new processes were started between 4:30am and 5am. This wasn't helpful.

j) I tried downloading and using Process Explorer in the hope that it might be able to identify the process that's causing the restart. If the program is capable of doing this then I'm not sure how. Process Explorer seemed to provided a lot of information on each process but nothing that helped me uncover what the intended function of said process was.

I've been trying to solve this puzzle for weeks now. The more time I invest in it, the harder it is for me to give up. Any help would be greatly appreciated. Thank you so much!

It sounds like a remote restart command using the Remote Shutdown Tool.

You said multiple computers do this at the same time?

It may be a script running on your domain server or other server on your network sending the command at 5AM daily.

I'm not sure, but you should see the event in Event Viewer under System.

Might be labeled something line "Power-Troubleshooter" and look for one right around that exact time.

Edit: Nevermind, I missed item e in the list. Although the Event Viewer entry might still be valid.

I am a Linux user but have used Windows XP for many years and all I can think of is that a Windows XP equivalent to a Linux cron job is causing this to happen. In other words this is a scheduled task and that task needs to be turned off or disabled.

This is how to create scheduled tasks in Windows XP:

Creating a Scheduled Task

Open Scheduler:

Go to Start > Programs > Accessories > System Tools > Scheduled Tasks:

Double-click Add Scheduled Task:

The Scheduled Task Wizard will appear. Click Next.

Select the program to run. Choose your browser from the list (for example, Internet Explorer or Mozilla Firefox). Click Next.

Give the task a Name, such as Drupal Cron Job, and choose the Frequency with which to perform the task (for example, Daily)). Click Next.

Choose specific date and time options (this step will vary, depending on the option selected in the previous step). When finished, click Next.

Enter your password if prompted. Change the username if required (for example, you'd like the task to run under a user with fewer privileges security reasons). Click Next.

On the final page, select the checkbox Open advanced properties for this task when I click Finish and click Finish.

Configuring the task

Go to the task's setting page either by checking the checkbox at the end of the last step, or by double-clicking on the task.

In the Run box, after the text that is there now (for example, C:\PROGRA~1\MOZILL~1\firefox.exe), enter a space and then type the address to your website's cron.php page in double quotations (for example, C:\PROGRA~1\MOZILL~1\firefox.exe http://www.example.com/cron.php

To set a frequency more often than Daily (for example, hourly), click the Schedule tab, then click Advanced. Here you can set options such as Repeat task, every 1 hour for 23 hours. Click Ok when finished.

Change the start time on the task to one minute from the current time. This will allow you to test the task and make sure that it is working.

When all settings have been configured to your liking, click Apply and OK (note: you may be prompted for your password)

Reread your post and it all sounds rather odd actually so this is probably not really going to help.

If it's not windows doing it (which I agree with above, it must be), and its not happening remotely, the last thing I can think of is something in the BIOS, try resetting the BIOS to defaults / check the battery ?

Main power issue? Maybe 5am something happens with the power to cause the systems to shutdown due to a power loss / spike ? Bit far fetched though

This topic is now closed to further replies.
  • Posts

    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.1 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) Download: AltSendme 0.4.1 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You are mostly right about the ephemeral nature of it. As I mention in the article, if you dont add a second device or take a backup of your account before uninstalling it, then yes you will lose access to your account. That said, in terms of actual user experience when you sync multiple devices your message history carries across and there's also a Saved Messages chat like there is on Telegram to send messages and attachments between your installs. But yh, what you point out are correct and its not trying to emulate Messenger or Telegram.
    • OK so SearXNG is a meta search engine that you can install locally or use via a public instance. It scrapes other search engines which you choose and then sorts the results. Not as complicated as multiple relays
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      492
    2. 2
      +Edouard
      224
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!