Anyone with a HP Microserver?


Recommended Posts

I have a N40L, bumped to 8GB, modified bios and added 2nd nic - my pfsense router runs as VM along with multiple other VMs and 3 other drives added with VM that is my NAS.

What is your questions/favor?

I have a N40L, bumped to 8GB, modified bios and added 2nd nic - my pfsense router runs as VM along with multiple other VMs and 3 other drives added with VM that is my NAS.

What is your questions/favor?

Why did you add a 2nd NIC? I have the same machine, should probably upgrade my RAM someday.

I guess i should have said anyone in the UK! :)

Ive lost my keys, apparently they are all the same...

You could give these guys a shout, my key says southco W-23 :)

I was wondering what Keys you meant ha! I thought you meant CD Keys but you mean door keys. Did you get a set? I am away this weekend but if you need one I could get one cut and post you one start of next week. Are they really all the same though? ...

Edit! You are about an hour away from me just realised :-p

I did get some, but just lost them somehow! Pretty sure they are the same! If you could d that tthat would be brilliant!

Of course, I will compensate you :)

Where are you?

I was wondering what Keys you meant ha! I thought you meant CD Keys but you mean door keys. Did you get a set? I am away this weekend but if you need one I could get one cut and post you one start of next week. Are they really all the same though? ...

Edit! You are about an hour away from me just realised :-p

Oh right, thought it might be for dual gigabit LAN. I'm running unRAID on mine :)

That's great, but you could just run unraid as VM and then do a bunch more with it as well. You see the storage VM there, that is my nas with raw access to 3 disks it serves up - but then I also have my router and my linux shell running 24/7 and then bunch of play/test boxes for different things.

If just running unraid - then the 2gb it came with it prob more than enough. Now what I have read is it really can go to 16GB, so thinking about doing that - would allow for more ram to each vm and still all running 24/7 etc..

What's ESXi performance like running on the N40L (I have one delivered at home for me to setup this weekend!).

Was going to attempt to either hackintosh it with Snow Leopard, or run ESXi on it and run a newer build. I have 8GB of RAM on order (was supposed to have been delivered yesterday :( ), but if it supports 16GB then I may well do that.

If just running unraid - then the 2gb it came with it prob more than enough. Now what I have read is it really can go to 16GB, so thinking about doing that - would allow for more ram to each vm and still all running 24/7 etc..

Just wondered if upgrading the RAM would make extracting, urm, rar files faster :p

I could not be happier with it.. Freaking thing uses like no power at all! Currently drawing 54.7 watts. That is with all those Vms running and 4 HDD in the thing. I get 70 to 90MBps when writing files to and from the NAS.

Tiny little box - takes up no room. And you could not beat the price. People in the UK had a mucher better deal on them, I know loads got them for like 100 quid.

Looking for a cheap dual port nic -- would like to have that option, and maybe move to 16GB -- if wife wouldn't kill me, I would prob by another one just to have ability to move Vms between hosts ;)

I could not be happier with it.. Freaking thing uses like no power at all! Currently drawing 54.7 watts. That is with all those Vms running and 4 HDD in the thing. I get 70 to 90MBps when writing files to and from the NAS.

Tiny little box - takes up no room. And you could not beat the price. People in the UK had a mucher better deal on them, I know loads got them for like 100 quid.

Looking for a cheap dual port nic -- would like to have that option, and maybe move to 16GB -- if wife wouldn't kill me, I would prob by another one just to have ability to move Vms between hosts ;)

Mine cost ?212 - and then I get the ?100 cashback, so it'll work out at ?112.

My current plan if I go with ESXi is to have the OS and VMs on the 250GB drives that come with it, and then add the other 4 hard drives with my stuff on them (I'm just pulling them from USB caddies :p). I was tempted to get a smallish SSD as the boot/vm drive, but that takes it to being beyond a budget server IMO.

I've also got a second PCI-e NIC for it - it was like ?7 (bought it specifically for hackintosh compatibility just in case :p), but I guess it means I'm not using the onboard LAN (never liked using them for some reason), and I have a spare port :p.

ESXi supports up to 10.7 'officially'. I've got 10.8 working fine though but to use the serial number from my mac (so imessages and icloud works) I've made my own chameleon boot CD, on ESXi 5.0 it was a bit annoying, to boot from a non-EFI CD you had to put a custom EFI bios file in and edit the VM to use it using vi and disable it from using EFI again using vi which was a trick for ESXi and it'd all work fine although on powerup the VM would freeze and you'd get a message asking if you want to release the CD lock or not, you have to manually click cancel or chameleon just errors and this happens on every boot/reboot so it's a bit of a pain but the VM runs perfectly fine and smooth whilst using it from within vSphere client....

I upgraded to 5.1 (didn't need to unpatch/repatch the mac osx thing which I forgot to do which I guess was a bit dump but maybe the files weren't modified from 5.0 -> 5.1?) and it's completely changed, doing the above trick no longer work, it'll boot the CD but the CD will be unable to see the GPT hard drive at all any more, so I had to change the OS from mac osx to 'other 64 bit' and run it as BIOS not EFI, so it boots now without the 'CD ROM locked' message but on the vSphere client, mac runs much slower, the Y of the mouse is inverted so if you move your mouse left-down it actually move left-up, but again it picks up my mac serial fine and iMessage/iCloud works fine. As I don't use the vSphere client to use it, it's no bother to me (I've got remote usage on and just VNC in, everything works fine when doing this).

Hope that helps! :p

I have had no issues with the onboard lan - I needed the other nic so I could isolate wan from lan so vm could be my physical networks router.

I am looking to get a dual nic so that I could break out vswitch for the admin of esxi, or whatever other uses I might find for being able to connect vswitch to different network segment, etc..

I got mine for like $279 with extra ram, extra nic and a 2TB drive to bumpup my storage for nas it was something a bit over $400 i think. Would have to break out the invoices.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • yes AND no the "original" or plain/normal Optiplex 7010 won't be getting any more new firmware updates BUT the Optiplex SFF/SFF Plus {small form factor}, Micro/Micro Plus & Tower/Tower Plus 7010 editions DO get new updates such as this new one   and here are similar guides from the Dell web site for Dell systems: https://www.dell.com/support/kbdoc/en-us/000390990/secure-boot-transition-faq https://www.dell.com/support/kbdoc/en-us/000347876/microsoft-2011-secure-boot-certificate-expiration
    • AT&T has been spying on US citizens with the NSA for decades.. they just know how to keep it more under wraps.. the evil level is still there.
    • >Improved system sounds when using Windows in dark mode. The story behind that bug would be an interesting one.
    • Edifier S3000MKII hi-fi audiophile grade bookshelf speaker is at its lowest price now by Sayan Sen Yesterday we covered a bunch of Dolby Atmos soundbar deals with several ones from Sony, as well as from JBL, Samsung, Polk Audio, and more. You can check them out in this dedicated piece. Those are not audiophile category speakers though as they are built with home theater use in mind. If you are searching for the former then Edifier has its S3000MKII at its lowest price at the moment (purchase link under the specs table down below). This is a two-way bookshelf monitor speaker designed to produce accurate sound. While it may not produce the best high-fidelity audio possible out there, it should still be significantly better than what you will get on soundbars of this price range. As such it will do justice to high-res audio played back through it. The only thing that may feel lacking is sub-bass as Edifier claims the unit can go down to 38 Hz, which should be enough for studio monitor purposes, but not for deep room-shaking rumbling bass. Where this does excel though is in its treble reproduction. With its super-tweeter, it claims to go as high as 40 kHz in the frequency spectrum, which should offer a sense of "air"yness. This is an active speaker which means it packs its own amplfication. It has a top-notch Class D amp that may be able to rival many Class AB designs too in terms of sound reproduction quality. The technical specs of the Edifier S3000MKII are given in the table below: Specification Value RMS Output Power 256W RMS (Treble: 8W × 2, Mid-Low: 120W × 2) Tweeter Driver 107mm × 107mm Planar Magnetic Tweeter Mid-Low Driver 6.5-inch (179mm) Long-Throw Aluminum Diaphragm Driver Frequency Response 38Hz – 40kHz Signal-to-Noise Ratio ≥ 85dB (A) Bluetooth Version Bluetooth 5.0 Bluetooth Codec Qualcomm® aptX™ HD Wireless Speaker Link Proprietary 5.8GHz wireless connection between speakers Supported Hi-Res Audio Hi-Res Audio Certified, up to 24-bit/192kHz Digital Processing XMOS XU216 Digital Signal Processor Audio Inputs Balanced XLR, Optical, Coaxial, USB Type-B, Line In, Bluetooth Input Sensitivity (USB) 400 ± 50mFFs Input Sensitivity (Optical) 400 ± 50mFFs Input Sensitivity (Coaxial) 400 ± 50mFFs Input Sensitivity (Bluetooth) 450 ± 50mFFs Input Sensitivity (Balanced XLR) 1000 ± 50mV Input Sensitivity (Line In) 600 ± 50mV ADC Capability Up to 24-bit/192kHz DSP Capability Up to 24-bit/192kHz DIX Capability Up to 24-bit/216kHz DAC Capability Up to 32-bit/384kHz XMOS Processing Power Up to 2,000 MIPS Edifier S3000MKII Audiophile Active (Powered) Wireless Speakers: $799.99 (Sold by Edifier US, Shipped by Amazon US) If you do not have the kind of budget to spend on the S3000MKII, you can also check out the Edifier R1280Ts which is right now on sale at just $114 (its lowest price in a very long time). Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      442
    2. 2
      +Edouard
      200
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!