Anyone with a HP Microserver?


Recommended Posts

I have a N40L, bumped to 8GB, modified bios and added 2nd nic - my pfsense router runs as VM along with multiple other VMs and 3 other drives added with VM that is my NAS.

What is your questions/favor?

I have a N40L, bumped to 8GB, modified bios and added 2nd nic - my pfsense router runs as VM along with multiple other VMs and 3 other drives added with VM that is my NAS.

What is your questions/favor?

Why did you add a 2nd NIC? I have the same machine, should probably upgrade my RAM someday.

I guess i should have said anyone in the UK! :)

Ive lost my keys, apparently they are all the same...

You could give these guys a shout, my key says southco W-23 :)

I was wondering what Keys you meant ha! I thought you meant CD Keys but you mean door keys. Did you get a set? I am away this weekend but if you need one I could get one cut and post you one start of next week. Are they really all the same though? ...

Edit! You are about an hour away from me just realised :-p

I did get some, but just lost them somehow! Pretty sure they are the same! If you could d that tthat would be brilliant!

Of course, I will compensate you :)

Where are you?

I was wondering what Keys you meant ha! I thought you meant CD Keys but you mean door keys. Did you get a set? I am away this weekend but if you need one I could get one cut and post you one start of next week. Are they really all the same though? ...

Edit! You are about an hour away from me just realised :-p

Oh right, thought it might be for dual gigabit LAN. I'm running unRAID on mine :)

That's great, but you could just run unraid as VM and then do a bunch more with it as well. You see the storage VM there, that is my nas with raw access to 3 disks it serves up - but then I also have my router and my linux shell running 24/7 and then bunch of play/test boxes for different things.

If just running unraid - then the 2gb it came with it prob more than enough. Now what I have read is it really can go to 16GB, so thinking about doing that - would allow for more ram to each vm and still all running 24/7 etc..

What's ESXi performance like running on the N40L (I have one delivered at home for me to setup this weekend!).

Was going to attempt to either hackintosh it with Snow Leopard, or run ESXi on it and run a newer build. I have 8GB of RAM on order (was supposed to have been delivered yesterday :( ), but if it supports 16GB then I may well do that.

If just running unraid - then the 2gb it came with it prob more than enough. Now what I have read is it really can go to 16GB, so thinking about doing that - would allow for more ram to each vm and still all running 24/7 etc..

Just wondered if upgrading the RAM would make extracting, urm, rar files faster :p

I could not be happier with it.. Freaking thing uses like no power at all! Currently drawing 54.7 watts. That is with all those Vms running and 4 HDD in the thing. I get 70 to 90MBps when writing files to and from the NAS.

Tiny little box - takes up no room. And you could not beat the price. People in the UK had a mucher better deal on them, I know loads got them for like 100 quid.

Looking for a cheap dual port nic -- would like to have that option, and maybe move to 16GB -- if wife wouldn't kill me, I would prob by another one just to have ability to move Vms between hosts ;)

I could not be happier with it.. Freaking thing uses like no power at all! Currently drawing 54.7 watts. That is with all those Vms running and 4 HDD in the thing. I get 70 to 90MBps when writing files to and from the NAS.

Tiny little box - takes up no room. And you could not beat the price. People in the UK had a mucher better deal on them, I know loads got them for like 100 quid.

Looking for a cheap dual port nic -- would like to have that option, and maybe move to 16GB -- if wife wouldn't kill me, I would prob by another one just to have ability to move Vms between hosts ;)

Mine cost ?212 - and then I get the ?100 cashback, so it'll work out at ?112.

My current plan if I go with ESXi is to have the OS and VMs on the 250GB drives that come with it, and then add the other 4 hard drives with my stuff on them (I'm just pulling them from USB caddies :p). I was tempted to get a smallish SSD as the boot/vm drive, but that takes it to being beyond a budget server IMO.

I've also got a second PCI-e NIC for it - it was like ?7 (bought it specifically for hackintosh compatibility just in case :p), but I guess it means I'm not using the onboard LAN (never liked using them for some reason), and I have a spare port :p.

ESXi supports up to 10.7 'officially'. I've got 10.8 working fine though but to use the serial number from my mac (so imessages and icloud works) I've made my own chameleon boot CD, on ESXi 5.0 it was a bit annoying, to boot from a non-EFI CD you had to put a custom EFI bios file in and edit the VM to use it using vi and disable it from using EFI again using vi which was a trick for ESXi and it'd all work fine although on powerup the VM would freeze and you'd get a message asking if you want to release the CD lock or not, you have to manually click cancel or chameleon just errors and this happens on every boot/reboot so it's a bit of a pain but the VM runs perfectly fine and smooth whilst using it from within vSphere client....

I upgraded to 5.1 (didn't need to unpatch/repatch the mac osx thing which I forgot to do which I guess was a bit dump but maybe the files weren't modified from 5.0 -> 5.1?) and it's completely changed, doing the above trick no longer work, it'll boot the CD but the CD will be unable to see the GPT hard drive at all any more, so I had to change the OS from mac osx to 'other 64 bit' and run it as BIOS not EFI, so it boots now without the 'CD ROM locked' message but on the vSphere client, mac runs much slower, the Y of the mouse is inverted so if you move your mouse left-down it actually move left-up, but again it picks up my mac serial fine and iMessage/iCloud works fine. As I don't use the vSphere client to use it, it's no bother to me (I've got remote usage on and just VNC in, everything works fine when doing this).

Hope that helps! :p

I have had no issues with the onboard lan - I needed the other nic so I could isolate wan from lan so vm could be my physical networks router.

I am looking to get a dual nic so that I could break out vswitch for the admin of esxi, or whatever other uses I might find for being able to connect vswitch to different network segment, etc..

I got mine for like $279 with extra ram, extra nic and a 2TB drive to bumpup my storage for nas it was something a bit over $400 i think. Would have to break out the invoices.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No its not, there are ton of Youtube videos to get you started, what do you think people did before AI existed?
    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!