Recommended Posts

Personally I haven't had any issues with Samsung 830 512gb or Crucial M4 256gb / 512gb, but I've also only been on SSDs for about 6 months. Now two of my friends had 128gb OCZ drives that died within a similar time frame, although many others had lots of positive experience with OCZ. I think the technology has matured enough that all manufacturers are probably decent. I looked at MTBF numbers and warranty when choosing my SSDs.

Ironically, my OCZ drive in my laptop just died a few moments ago. About the 6 month mark... It only makes a high pitched whine and won't actually boot or show up as a drive.

My experience isn't anything more than anecdotal evidence, but there you have it.

Regardless of "reliable" or not, every SSD can and will brick eventually. Imagine what happens if you lost the data on it...if you can't handle losing it, then back it up! Buy a standard WD Green and back it up! Use any tool you want - Windows Backup does a great job.

TLDR: Back it up!!

Oh, most 'brand name' (Crucial, OCZ, Samsung, Intel, Corsair) SSDs are good. Some may be a little better, but they all have a reasonable chance to brick on you.

My gut feeling tells me it is a toss up between the Crucial M4 and Samsung 830,

I have a Crucial M4 128GB, it is my first SSD so i dont really have anything to compare it to, and im not going to say its better than the Samsung because that would be biased!

Its just given me no problems, and i know Crucial are very good with their support should anything go wrong.

Regardless of "reliable" or not, every SSD can and will brick eventually. Imagine what happens if you lost the data on it...if you can't handle losing it, then back it up! Buy a standard WD Green and back it up! Use any tool you want - Windows Backup does a great job.

TLDR: Back it up!!

Oh, most 'brand name' (Crucial, OCZ, Samsung, Intel, Corsair) SSDs are good. Some may be a little better, but they all have a reasonable chance to brick on you.

well, yea, obviously. but it's still a PITA when you have to reinstall everything because the OS disk failed. And although every major brand is good, I'm wondering if there's a clear winner anymore. The old Intel controllers were less than 1 percentage point better than the next best but it was still the undisputed champion in reliability. Is there still someone like that anymore with everyone using either Marvell or Sandforce?

My gut feeling tells me it is a toss up between the Crucial M4 and Samsung 830,

I have a Crucial M4 128GB, it is my first SSD so i dont really have anything to compare it to, and im not going to say its better than the Samsung because that would be biased!

Its just given me no problems, and i know Crucial are very good with their support should anything go wrong.

A couple of people have mentioned Samsung, weren't they pretty bad a while ago? Is the current generation much better?

SSDs and other Flash-based storage devices are on the other side of the "reliability" universe: when they die, they die with a sudden bang and you will never, ever be able to extract a single bit from them.

If you want "reliability", you just need to purchase a server-grade hard disk drive. At least, when the end will come for the drive, you will be able to recover something before (and even after) the drive's demise....

SSDs and other Flash-based storage devices are on the other side of the "reliability" universe: when they die, they die with a sudden bang and you will never, ever be able to extract a single bit from them.

If you want "reliability", you just need to purchase a server-grade hard disk drive. At least, when the end will come for the drive, you will be able to recover something before (and even after) the drive's demise....

I would tend to agree, but the performance you get from the SSD is worth the risk of it dying on you. So to protect my self I run an image of my boot / OS drive 3 times a week to an external USB hard drive. My other two machines with SSDs are imaged manually once in a while; but their contents are mostly static so I don't need a weekly backup. Either-way, whether you go with a SSD or a spindle / mechanical drive, you want to have a backup in place if you have important data or just want to save time during recovery.

Ironically, my OCZ drive in my laptop just died a few moments ago. About the 6 month mark... It only makes a high pitched whine and won't actually boot or show up as a drive.

My experience isn't anything more than anecdotal evidence, but there you have it.

Yep, my OCZ drive lived very shortly, and I've had friend's with failed OCZ drives. Some people have good luck with them, and others don't. I can't recommend them at all. My choice is between the Samsung 830 (or newly released 840, although don't know how reliable they are since it's a new model), Crucial M4, and I've had good luck with Intel 320 series. In any case, the lesson is backup all your data, regardless of the brand.

My OCZ disks have been pretty good.

I had one fail on me, but I overwrote the error flags and it just kept on trucking.

I'd recommend OCZ or Samsung. The Samsungs seen quite good, and as you can see, lots of people recommending them :)

Yarp

I have little experience of my own with SSDs but the Sand Disk Extreme 256GB that I have is been more than good. The price was a steal and the speeds are awesome.

I think many of the early SDD issues like reliability and rewrites have been improved by all manufacturers. I would say try to find the best bang for the buck.

And as other guyhere pointed out: Back everything up just in case. In my case, I keep separate file backups from folders I use on the SSD, not the entire drive because I don't mind reinstall eveything again.

My intuition tells me Crucial m4. Fast and a great Marvell controller.

Three-way tie between Crucial m4 (Marvell controller), Intel 330/520 (modded SandForce controller), and Samsung 83x/84x (Samsung MCX controller).

Note that the generic SandForce controller is not listed (along with the generic Marvell controller) - also MIA is the newer version of the OCZ Vertex 4 (modded Marvell controller, different from the controller of the Crucial m4).

On this topic, we have been switching laptops at work over to Samsung 840's but haven't seen any failures or issues yet, albeit we are just starting to convert over and a few months old. The drives are in laptops with 100% data on SSD. Also drives are encrypted with a third party program so that makes more use I suppose.

I have been wanting to switch to SSD myself in the past but have been too gun shy about it because of the relatively short life on them. I have figured the best practice would be to install OS only on SSD and then use HDD for data/programs etc.. Would this in theory bring the life span of the drive to last longer since the amount of writes is less?

I would tend to agree, but the performance you get from the SSD is worth the risk of it dying on you.

It's a choice you have to make. And until SSD drives won't have something more meaningful for data storage like PCM of memristor chips (let's say, within the next five years?), I will always choose to spend the extra money an SSD will cost on a server-grade hard disk drives with spinning platters....

It seems like the general concensus is a toss-up between Crucial M4 and Samsung 830/840. I read on Anandtech that their review units of the 840 Pro both broke, has that been fixed? And are there significant differences between the Marvell controller on Crucial and the Samsung controllers?

It's a choice you have to make. And until SSD drives won't have something more meaningful for data storage like PCM of memristor chips (let's say, within the next five years?), I will always choose to spend the extra money an SSD will cost on a server-grade hard disk drives with spinning platters....

that's assuming that you value reliability above all else.

Plextor M5 Pro

I second that.

The Plextor M3/M5 series are basically Crucial M4s without the firmware problems (legendary Plextor Firmware engineering and QA) and with an included 5 year parts warranty (the 1st 3 years you don't even pay shipping in case of a RMA, they send someone pick up the drive at your doorstep)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • draw.io Desktop 30.2.6 by Razvan Serea draw.io desktop is a downloadable security-first diagramming application that runs on Windows, MacOS and Linux. Creating diagrams in the desktop app doesn’t need an internet connection. This is useful when you are disconnected or when you must create diagrams in a highly secure environment, where data protection is of the utmost importance. When you use the draw.io desktop app, your diagrams will be stored on your local device. Because this is a stand-alone application, also designed to run offline, there are no interfaces to cloud storage platforms available. Of course, you can still store your diagrams in folders that are synchronised to your cloud storage if you wish. Easy-to-use diagram editor The draw.io apps work just like the office and drawing tools you are used to using. Drag and drop shapes from the shape libraries and drag to draw connectors between them. Drag connectors to add waypoints and set a precise shape and position, or let them reroute automatically. Double click and start typing to add a label to anything. Create tables and swimlane flows with a familiar tool. Style shapes and connectors with customisable palettes, sketch options, fonts and text formatting tools. Search for shapes, including in open-source icon libraries. Use our vast libraries of shapes and templates, organised into logical categories, to create a range of diagrams and infographics. Generate diagrams from text descriptions using our smart templates. Diagram faster with keyboard shortcuts. draw.io Desktop 30.2.6 changelog: Uses electron 42.5.0 #2452 Updates to draw.io core 30.2.6. Download: draw.io 64-bit | Standalone (Open Source) Download: draw.io 32-bit | ARM64 | ARM64 Standalone Links: draw.io Home Page | Project page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      497
    2. 2
      +Edouard
      207
    3. 3
      PsYcHoKiLLa
      146
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!