My OCZ Vertex 2 Is Dead


Recommended Posts

Date purchased: January 2, 2011

Date died: November 24, 2012

Place of purchase: Amazon

Model: OCZ Vertex 2 120GB

Firmware: 1.34

Noticeable things that occur before it died, note that it has been happening for ~1 week until it died:

-Some programs took a while to startup but the most noticeable one is BitDefender 2013

-Explorer.exe hangs for about 10-30 seconds when accessing folders

-Invisible icons at startup but after ~30 seconds they reappear

-Shortcuts were unable to locate programs but after ~30 seconds it finds it

Leaving my SSD disconnected for ~2 hours in hoping that will reset the whole thing and get it out of panic mode. Will report back after 2 hours..

Link to comment
https://www.neowin.net/forum/topic/1121914-my-ocz-vertex-2-is-dead/
Share on other sites

I've read a lot of warnings about OCZ ssd's -- R.I.P.

No kidding, I even took care of it by preventing lots of writes (according to the SSD life tool the health was at 100%) and unfortunately no backups of the SSD were made.

You sure its not just Windows that has died ?

Can Windows cause it to go into panic mode?

Might be worth checking the warranty period on them, I think it might be more than a year.

As long as you can find a copy of the receipt/order confirmation they seem to be pretty good at sorting an RMA.

The Repair/Replacement centre for Europe is in the Netherlands, Had a vertex 2E die in a machine we used at work took 2 days after shipping the faulty one to receive a replacement. Seems they shipped the replacement on the same day they received the faulty one.

Can Windows cause it to go into panic mode?

If something gets corrupted / malware infection / possibly even bad RAM, could cause Windows to start doing a whole range of weird stuff

I'd try reinstalling before giving up on the SSD, not saying that is definitely the problem but before blaming hardware I would always test software first

If something gets corrupted / malware infection / possibly even bad RAM, could cause Windows to start doing a whole range of weird stuff

I'd try reinstalling before giving up on the SSD, not saying that is definitely the problem but before blaming hardware I would always test software first

Um, panic mode?

Unfortunate you didn't make backups. Long term reliability of some SSDs is a gamble. Can folks tell me which SSDs they have had good long-term experience with? How is people's Intel X25-M G2 doing?

Well, I also have a Vertex 2 64Gb inside my Windows Desktop, no problem at the moment.... No problem with the Crucial M4 256Gb inside my Mac mini.

The problem with SSD is that when they fail, they fail QUICK.... No warning... They go from working fine to corrupting data and die....

Will do, I'm hoping that the next replacement won't have this issue or else I'll have to purchase a different brand.

I know that there has been people with issues with this series, but IMO I'd say you were just unlucky. I've got 2 Vertex 2E 60gb's in separate systems which I've had since 2010 that are working fine to this day (knock on wood haha).

Avoid OCZs, you hear nothing but bad things about them.

Also if it's in a desktop and you have a large enough HDD, I recommend to regularly make a system image onto the HDD. I have my computer set to automatically backup (differential) the whole SSD onto my 3TB HDD every morning at 5AM.

Unfortunate you didn't make backups. Long term reliability of some SSDs is a gamble. Can folks tell me which SSDs they have had good long-term experience with? How is people's Intel X25-M G2 doing?

I bought a Vertex 2 two years ago and it's still working. Cross fingers.

SSD or HDD one should always make a backup to an external HDD.

While HDD last for a longer period of time let's be honest often after 3-4 years they start making lot of noise while seeking. My 250GB WD Caviar is really noisy and has been for a good 2 years.

Personally i would try to re-install Windows. A slow installation can be caused by a lot of things other than the SSD or HDD.

snip

My Vertex 2 died not too long ago. I RMA'd it with OCZ and they gave me a brand spankin' new one. There is a 5 year warranty on it, so you are fine. Go here and create an RMA ticket.: http://www.ocztechno...pport/warranty/

They will send you a series of emails on where and how to mail it. The first one will be a conformation that they have your RMA, the second will be approval, and the 3rd will be shipping info. I got the 3rd email two days after it died so just be patient. Hope this helps! :) BTW: OCZ's support is awesome. They put my new drive on overnight shipping.

My Vertex 2 died not too long ago. I RMA'd it with OCZ and they gave me a brand spankin' new one. There is a 5 year warranty on it, so you are fine. Go here and create an RMA ticket.: http://www.ocztechno...pport/warranty/

They will send you a series of emails on where and how to mail it. The first one will be a conformation that they have your RMA, the second will be approval, and the 3rd will be shipping info. I got the 3rd email two days after it died so just be patient. Hope this helps! :) BTW: OCZ's support is awesome. They put my new drive on overnight shipping.

How long did the process take from shipping to receiving?

Can folks tell me which SSDs they have had good long-term experience with? How is people's Intel X25-M G2 doing?

Mine's been spinning for - I think - about two and a half years now. I also have an OCZ Vertex 4. Lovely device, I say.

Experienced the same symptoms with my Vertex 3 a few months back. A secure wipe using the OCZ Bootable Linux Tools was enough to bring the drive back to full working order, but of course I lost everything. It took a few evenings to rebuild and re-install everything that I needed but eventually I was back up and running. In my case I didn't loose too much as the drive was solely hosting the OS and programs. Data is stored on a regular HDD.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I have one of these monitors, i picked one up last year for cheap they work pretty well for everyday use and they are pretty clear and color isnt bad
    • Internet Download Manager (IDM) 6.43 Build 2 by Razvan Serea Internet Download Manager (IDM) is a tool to increase download speeds by up to 8 times due to its smart dynamic file segmentation technology. Unlike other download managers and accelerators, Internet Download Manager segments downloaded files dynamically during download process, and it reuses available connections without additional connect and login stages to achieve the best possible acceleration performance. Comprehensive error recovery and resume capability will restart broken or interrupted downloads due to lost connections, network problems, computer shutdowns, or unexpected power outages. All popular browsers are supported IDM integrates seamlessly into Google Chrome, FireFox, Microsoft Edge, Opera, Safari, Internet Explorer, Maxthon and all other popular browsers to automatically handle your downloads. You can also drag and drop files, or use Internet Download Manager from command line. The program supports proxy servers, ftp and http protocols, firewalls, redirects, cookies, authorization, MP3 audio and video content processing. IDM includes web site spider and grabber IDM downloads all required files that are specified with filters from web sites, for example all pictures from a web site, or subsets of web sites, or complete web sites for offline browsing. It's possible to schedule multiple grabber projects to run them once at a specified time, stop them at a specified time, or run periodically to synchronize changes. Easy downloading with one click When you click on a download link in a browser, IDM will take over the download and accelerate it. You don't need to do anything special, just browse the Internet as you usually do. IDM will catch your downloads and accelerate them. IDM supports HTTP, FTP, HTTPS and MMS protocols. Changes in Internet Download Manager 6.43 Build 2: Resolved the problem that caused a "403 Forbidden" error when downloading some files Fixed a problem causing IDM download panel not to appear on some websites Fixed a bug that caused a crash when converting some TS files to MP4 Download: Internet Download Manager 6.43 Build 2 | 11.9 MB (Shareware) Links: Internet Download Manager Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • It's in Experimental (26H2). Settings->Windows Update->Windows Insider Program. Then a) select Experimental, b) below that, select "Advanced Options" (where you will see the three options for "Experimental" builds -> select 26H2 (name change from 25H2 is rolling; so might be 25H2)
  • Recent Achievements

    • Dedicated
      Zeynel earned a badge
      Dedicated
    • One Month Later
      JKR earned a badge
      One Month Later
    • Dedicated
      Asgardi earned a badge
      Dedicated
    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      246
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      Steven P.
      86
    5. 5
      macoman
      65
  • Tell a friend

    Love Neowin? Tell a friend!