My OCZ Vertex 2 Is Dead


Recommended Posts

Date purchased: January 2, 2011

Date died: November 24, 2012

Place of purchase: Amazon

Model: OCZ Vertex 2 120GB

Firmware: 1.34

Noticeable things that occur before it died, note that it has been happening for ~1 week until it died:

-Some programs took a while to startup but the most noticeable one is BitDefender 2013

-Explorer.exe hangs for about 10-30 seconds when accessing folders

-Invisible icons at startup but after ~30 seconds they reappear

-Shortcuts were unable to locate programs but after ~30 seconds it finds it

Leaving my SSD disconnected for ~2 hours in hoping that will reset the whole thing and get it out of panic mode. Will report back after 2 hours..

Link to comment
https://www.neowin.net/forum/topic/1121914-my-ocz-vertex-2-is-dead/
Share on other sites

I've read a lot of warnings about OCZ ssd's -- R.I.P.

No kidding, I even took care of it by preventing lots of writes (according to the SSD life tool the health was at 100%) and unfortunately no backups of the SSD were made.

You sure its not just Windows that has died ?

Can Windows cause it to go into panic mode?

Might be worth checking the warranty period on them, I think it might be more than a year.

As long as you can find a copy of the receipt/order confirmation they seem to be pretty good at sorting an RMA.

The Repair/Replacement centre for Europe is in the Netherlands, Had a vertex 2E die in a machine we used at work took 2 days after shipping the faulty one to receive a replacement. Seems they shipped the replacement on the same day they received the faulty one.

Can Windows cause it to go into panic mode?

If something gets corrupted / malware infection / possibly even bad RAM, could cause Windows to start doing a whole range of weird stuff

I'd try reinstalling before giving up on the SSD, not saying that is definitely the problem but before blaming hardware I would always test software first

If something gets corrupted / malware infection / possibly even bad RAM, could cause Windows to start doing a whole range of weird stuff

I'd try reinstalling before giving up on the SSD, not saying that is definitely the problem but before blaming hardware I would always test software first

Um, panic mode?

Unfortunate you didn't make backups. Long term reliability of some SSDs is a gamble. Can folks tell me which SSDs they have had good long-term experience with? How is people's Intel X25-M G2 doing?

Well, I also have a Vertex 2 64Gb inside my Windows Desktop, no problem at the moment.... No problem with the Crucial M4 256Gb inside my Mac mini.

The problem with SSD is that when they fail, they fail QUICK.... No warning... They go from working fine to corrupting data and die....

Will do, I'm hoping that the next replacement won't have this issue or else I'll have to purchase a different brand.

I know that there has been people with issues with this series, but IMO I'd say you were just unlucky. I've got 2 Vertex 2E 60gb's in separate systems which I've had since 2010 that are working fine to this day (knock on wood haha).

Avoid OCZs, you hear nothing but bad things about them.

Also if it's in a desktop and you have a large enough HDD, I recommend to regularly make a system image onto the HDD. I have my computer set to automatically backup (differential) the whole SSD onto my 3TB HDD every morning at 5AM.

Unfortunate you didn't make backups. Long term reliability of some SSDs is a gamble. Can folks tell me which SSDs they have had good long-term experience with? How is people's Intel X25-M G2 doing?

I bought a Vertex 2 two years ago and it's still working. Cross fingers.

SSD or HDD one should always make a backup to an external HDD.

While HDD last for a longer period of time let's be honest often after 3-4 years they start making lot of noise while seeking. My 250GB WD Caviar is really noisy and has been for a good 2 years.

Personally i would try to re-install Windows. A slow installation can be caused by a lot of things other than the SSD or HDD.

snip

My Vertex 2 died not too long ago. I RMA'd it with OCZ and they gave me a brand spankin' new one. There is a 5 year warranty on it, so you are fine. Go here and create an RMA ticket.: http://www.ocztechno...pport/warranty/

They will send you a series of emails on where and how to mail it. The first one will be a conformation that they have your RMA, the second will be approval, and the 3rd will be shipping info. I got the 3rd email two days after it died so just be patient. Hope this helps! :) BTW: OCZ's support is awesome. They put my new drive on overnight shipping.

My Vertex 2 died not too long ago. I RMA'd it with OCZ and they gave me a brand spankin' new one. There is a 5 year warranty on it, so you are fine. Go here and create an RMA ticket.: http://www.ocztechno...pport/warranty/

They will send you a series of emails on where and how to mail it. The first one will be a conformation that they have your RMA, the second will be approval, and the 3rd will be shipping info. I got the 3rd email two days after it died so just be patient. Hope this helps! :) BTW: OCZ's support is awesome. They put my new drive on overnight shipping.

How long did the process take from shipping to receiving?

Can folks tell me which SSDs they have had good long-term experience with? How is people's Intel X25-M G2 doing?

Mine's been spinning for - I think - about two and a half years now. I also have an OCZ Vertex 4. Lovely device, I say.

Experienced the same symptoms with my Vertex 3 a few months back. A secure wipe using the OCZ Bootable Linux Tools was enough to bring the drive back to full working order, but of course I lost everything. It took a few evenings to rebuild and re-install everything that I needed but eventually I was back up and running. In my case I didn't loose too much as the drive was solely hosting the OS and programs. Data is stored on a regular HDD.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Yes, it was amusing at the time because even then dbrand was well known for stealing the designs of products from other companies. That’s what they do.
    • Didn’t Dbrand once complain that Casetify was ripping off their designs a well? seems pretty bad of them to try and get around Valve’s copyright this way with that in mind.
    • Dbrand thought they could get away with this Steam Machine case, Valve disagreed by David Uzondu Image via Dbrand Dbrand has cancelled its highly anticipated Companion Cube enclosure for the Valve Steam Machine, which it teased back in November of last year with a concept render and sign-up page, because it did not ask Valve for permission first before manufacturing the case. According to Dbrand, it took the "backwards approach" of building the product first before asking for permission from the copyright holder. Seven months of work went into the project, requiring over a thousand engineering hours from the design team. Workers developed forty-four sets of injection molding tools, making a unique mold for each sub-component of the crate. When the Companion Cube went live on Monday last week, it, according to Dbrand, quickly became the second-fastest-selling product in the company's fifteen-year history, racking up orders for hundreds of thousands of units. Customers eagerly bought the $129.95 deluxe edition or the bare-bones $99.95 version, which the manufacturer cheekily branded as the "Poverty Cube". It was around this time that the legal eagles at Valve descended on the accessory maker with a formal demand. The developer pointed out that the iconic block design remains protected intellectual property from the game Portal, so unlicensed sales had to stop. Dbrand said that all its pleas to salvage the project with the Valve team, including proposals to run a properly licensed release under official terms "with their blessing", fell on deaf ears, so it had no choice but to obey and remove every trace of the product from the internet. If you bought the enclosure, the company said that banks will process your refund by the end of this week, but if it still hasn't arrived in your account by then, you should not hesitate to contact support. The Steam Machine itself is a high-performance console that Valve designed directly to bring PC gaming into the living room. It was announced on 12th November 2025 (the same day Dbrand announced the Cube) and runs on the Linux-based SteamOS, the same OS that powers the Steam Deck. As for the price, due to the shortage of memory and storage chips, the hardware cost landed much higher than people were expecting, starting at $1,049 for the 512 model (without a controller) or $1,128 with the new gamepad. The premium 2 TB model pushes those prices even higher, selling at $1,349 for the standalone console and hitting $1,428 if you want the bundle.
  • Recent Achievements

    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      97
    5. 5
      macoman
      57
  • Tell a friend

    Love Neowin? Tell a friend!