Recommended Posts

Hey neowin,

So today I have a little story for you. My Cousins fiancee brought his computer to me and asked me to fix it. Through some testing it turned out his GPU (9800gt) BIOS had been corrupted (I assume he tried flashing and screwed it up and just won't admit to it). I replaced it with an old 9500gt I had in my spare parts box. I quoted him a price, returned his PC and he asked if I wanted to keep the 9800gt, maybe fix it. So I did.

I first tried it in my system as is. Of course it didn't post, just gave a beep code and hung. So I took it out, plugged in my second monitor into my IGP, and started it up, went into the BIOS and chose to the IGP instead of PCI-e card. I started all the way to Windows just to be sure it would work properly, restarted and put the 9800gt back in without connecting the monitors to it. Even though the BIOS was set to load from IGP, and the monitor was connected to on-board. I had no video feed.

I could hear the normal start-up beep codes after the GPU codes, and all my peripherals started up, my HDD's loaded into Windows, but yet I still have no video from on-board. I also tried setting the BIOS to load into my Ubuntu partition instead to make sure it wasn't a driver error, and still nothing. Any thoughts on what's going on? Thanks in advance.

-Brennon

Operating System: Microsoft Windows 7 Ultimate 64-bit SP1

CPU: AMD Athlon II X2 215 29 ?C

Regor 45nm Technology

RAM: 3.00 GB Dual-Channel DDR2 @ 334MHz (5-5-5-15)

Motherboard: MSI MS-7309 (CPU 1) 41 ?C <--BIOS AMI v9.9

Graphics:

HP S2031 (1600x900@60Hz)

HF199H (1440x900@60Hz)

1023MB GeForce GT 430 (PNY) 42 ?C <-- My normal Graphics card

Hard Drives:

699GB Western Digital WDC WD75 02AAEX-00Y9A SCSI Disk Device (ATA)

466GB Western Digital WDC WD50 00AAKS-00UU3 SCSI Disk Device (ATA)

Optical Drives

No optical disk drives detected

Audio

Realtek High Definition Audio

Link to comment
https://www.neowin.net/forum/topic/1122340-bricked-graphics-card-revival/
Share on other sites

If its linux and the machine has started up can you vnc to it or ssh? you could then see what is going on.

If the machine has really booted up but the card is dead you could then try flashing it but its possibly beyond help.

How sure are you that the card has been corrupted and it has not just failed? I had an old nvidia card (last one I will ever buy from nvidia) and one day it just up and failed. It was working fine, I shut down my PC, Turned the PC on a few hours later and nothing at all.

I will only buy ati cards now as nvidia cards always do this to me and always when they are just out of warranty. However I'm sure someone will post about how ati cards do the same to them but this is personal experience.

If you do manage to revive the card then fair play but tbh I would just bin it and move on

Well I would try those, but even if I use the internal graphics with the card installed I have no display. The only way I know it's booted is from the HDD gurgle and the LCD on my G15 loads the applets. And I am speculating that the BIOS failed from the beep codes, the codes it was giving were from a corrupted BIOS not so much total failure.

Nah there's no warranty left on it. Its a good 3-4 years old, atleast that's what my cousin's fiancee said. I'm kind of more interested in why I have no video even with onboard graphics, with the card plugged in. If I take the card out its fine, If I put in my 430, no video.

If you are willing to take some risk you can hot plug the pci-e card after the POST. make sure the boot process stops in the boot menu and hot-plug the videocard.

This guy did it successfully:

https://bitcointalk.org/index.php?PHPSESSID=560851125397973585521e4f95408492&topic=56704.msg675736#msg675736

WARNING: This may cause damage to your motherboard, so if it's not really important to revive the graphics card, i would not recommend it.

This topic is now closed to further replies.
  • Posts

    • According to Microsoft, Cause: One of the drivers controlling the device notified the operating system that the device failed in some manner.   https://support.microsoft.com/en-us/topic/error-codes-in-device-manager-in-windows-524e9e89-4dee-8883-0afa-6bca0456324e
    • This looks awesome, I will request access via Steam later this afternoon!
    • Personally, I’ve found that it’s usually worth investing in the infrastructure you don’t want to replace later, especially cabling. Running Cat6A (or better, depending on your needs) during an upgrade is relatively inexpensive compared to having to re-cable a few years down the road. For switches I try to balance current specs with realistic growth. If my budget allows it Ill choose switches with higher uplink speeds which leaves room for expanding later on, but I don’t necessarily overspend on access ports if the endpoints won’t benefit from them anytime soon. One lesson I’ve learned is that planning for scalability pays off. It’s much easier to add devices, VLANs, or higher-bandwidth workloads when your network infrastructure already supports it than to replace hardware later.  What is your budget like?
    • I hate the term, "future-proof." We saw it back in the 90's / 2000's, if not before. You cannot future-proof anything, since there is no definition of how far into the future you plan on prepping for. Best idea is to tell us what you currently have and what its use is at the moment, and we can then offer ideas about some areas that might need an upgrade and other areas that can be left alone.
    • I can agree that it is being used in a small capacity. I worked for a company where their engineers still used XP, and when asked why it was because their sensor software wasn't compatible with newer operating systems and the software was discontinued so they couldn't upgrade the software. Given that the sensors were still in use by companies, they had to continue using XP to support the sensor, otherwise the price to the company would have gone into the millions or billions. Our response was simple: Ok, you can keep the XP machine. But we're removing it from the network. "But then it can't access the Internet or folder shares!" Yup, kinda the point. If someone wants to continue using an unsecure OS they can do, I have no problem with that. But it should be isolated. Simple. I had a fight with a guy in the engineering department for weeks before he finally relented. But we digress.   What do I plan on doing to commemorate the anniversary? Nothing. I have fond memories of the OS, but at the end of the day it's just an OS. If I had some time I might see if I could install it on my Raspberry Pi for a laugh. But my reflex memory with today's OS ideas would probably get me frustrated and I'd uninstall it after 5 mins.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      539
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!