Why does the "System Reserved" parititon keep removing its own labe


Recommended Posts

so how about a screenshot now showing its current state, then will have as reference when you say it changes.

As you wish :)

This is working (showing the label and hibernate works):

dsfz.png

The "photoshop" version of what happens is usually this (next time it happens Ill show you the official screenshot:

choppedu.png

Found this on hibernation issues- Seems as if in some systems it gets set 75 which is not enough for some systems causing random hibernation issues.

Change the registry setting HKLM\System\CurrentControlSet\Control\Power\HiberFileSizePercent to 100.

Rebooted. Now hiberfile size is 100% of RAM size. Hibernation now works.

Here is the picture you asked of when it happens:

..

You don't happen to have any 3rd party boot managers or an antivirus that protects the boot partition, do you?

Also, what type of Windows install is this? OEM, Retail or Volume License?

Found this on hibernation issues- Seems as if in some systems it gets set 75 which is not enough for some systems causing random hibernation issues.

Change the registry setting HKLM\System\CurrentControlSet\Control\Power\HiberFileSizePercent to 100.

Rebooted. Now hiberfile size is 100% of RAM size. Hibernation now works.

Done. Ill fix it like always and see if it does any difference...

You don't happen to have any 3rd party boot managers or an antivirus that protects the boot partition, do you?

Also, what type of Windows install is this? OEM, Retail or Volume License?

Nope.

This is VL.

Nope.

This is VL.

Just a longshot, but can I assume you're activated normally and don't have a 3rd party bootloader? Some 3rd party bootloaders tend to overwrite partition tables.

Who says it get removed? Looks to me like the disk just didn't get read correctly - since your file type is gone. If just label was removed you would still see that its a NTFS file system still.

Go to a command line and use disk part to see if you can view it that way. Elevated prompt!

C:\Windows\system32>diskpart

Microsoft DiskPart version 6.1.7601

Copyright ? 1999-2008 Microsoft Corporation.

On computer: I5-W7

DISKPART> sel disk 1

Disk 1 is now the selected disk.

DISKPART> list vol

Volume ### Ltr Label Fs Type Size Status Info

---------- --- ----------- ----- ---------- ------- --------- --------

Volume 0 E DVD-ROM 0 B No Media

Volume 1 I DVD-ROM 0 B No Media

Volume 2 System Rese NTFS Partition 100 MB Healthy System

Volume 3 C OS NTFS Partition 931 GB Healthy Boot

Volume 4 D stuff NTFS Partition 232 GB Healthy

Volume 5 Removable 0 B No Media

Volume 6 Removable 0 B No Media

Volume 7 Removable 0 B No Media

Volume 8 Removable 0 B No Media

DISKPART>

Who says it get removed? Looks to me like the disk just didn't get read correctly - since your file type is gone. If just label was removed you would still see that its a NTFS file system still.

Go to a command line and use disk part to see if you can view it that way. Elevated prompt!

C:\Windows\system32>diskpart

Microsoft DiskPart version 6.1.7601

Copyright ? 1999-2008 Microsoft Corporation.

On computer: I5-W7

DISKPART> sel disk 1

Disk 1 is now the selected disk.

DISKPART> list vol

Volume ### Ltr Label Fs Type Size Status Info

---------- --- ----------- ----- ---------- ------- --------- --------

Volume 0 E DVD-ROM 0 B No Media

Volume 1 I DVD-ROM 0 B No Media

Volume 2 System Rese NTFS Partition 100 MB Healthy System

Volume 3 C OS NTFS Partition 931 GB Healthy Boot

Volume 4 D stuff NTFS Partition 232 GB Healthy

Volume 5 Removable 0 B No Media

Volume 6 Removable 0 B No Media

Volume 7 Removable 0 B No Media

Volume 8 Removable 0 B No Media

DISKPART>

Right now it is working (I added and removed the drive letter as always to fix it)

Here it is currently fixed:

Microsoft DiskPart version 6.1.7601

Copyright © 1999-2008 Microsoft Corporation.

On computer: SUM

DISKPART> sel disk 1

Disk 1 is now the selected disk.

DISKPART> list vol

Volume ### Ltr Label Fs Type Size Status Info

---------- --- ----------- ----- ---------- ------- --------- --------

Volume 0 E DVD-ROM 0 B No Media

Volume 1 F DVD-ROM 0 B No Media

Volume 2 System Rese NTFS Partition 100 MB Healthy System

Volume 3 C NTFS Partition 465 GB Healthy Boot

Volume 4 D NTFS Partition 8 TB Healthy

Volume 5 G Removable 0 B No Media

DISKPART>

Ill post it again when it breaks again...

  • 2 weeks later...

Here it is again broke:

Microsoft DiskPart version 6.1.7601

Copyright © 1999-2008 Microsoft Corporation.

On computer: SUM

DISKPART> sel disk 1

Disk 1 is now the selected disk.

DISKPART> list vol

Volume ### Ltr Label Fs Type Size Status Info

---------- --- ----------- ----- ---------- ------- --------- --------

Volume 0 E DVD-ROM 0 B No Media

Volume 1 F DVD-ROM 0 B No Media

Volume 2 Partition 100 MB Healthy Offline

Volume 3 C NTFS Partition 465 GB Healthy Boot

Volume 4 D NTFS Partition 8 TB Healthy

Volume 5 G Removable 0 B No Media

DISKPART>

Shows offline for whatever reason - so yeah its not going to show you label or type. So there is NOTHING in your event log on why the volume was set offline?? I find that almost impossible to believe.

what do you get if you just set it back online

sel vol 2

online volume

Shows offline for whatever reason - so yeah its not going to show you label or type. So there is NOTHING in your event log on why the volume was set offline?? I find that almost impossible to believe.

What and where do I look in my Event Log? Anything specific?

What and where do I look in my Event Log? Anything specific?

generally what I do is let it load up-- then sort by type-- look for anything red -

When you sort by type depending on the sort they will either be at the top or bottom of the list.

I would start there... usually those will tell you if there are serious issues.

Found something! :) Finally. I just don't know how the **** this arrived like this. And how the **** do I remove it?

Encrypted volume check: Volume information on \\?\Volume{b692cea4-1ccd-11e2-80c8-806e6f6e6963} cannot be read.

Source: BitLocker-Driver

User: SYSTEM

The thing is I have never used Bitshit in my life. How the **** do I nuke this piece of ****?

And now even stranger: I used to be able to assign it a letter (therefore recovering the label), deassign it the letter and then hibernate. Now I do the same process but when I hibernate it, the display goes black but the PC keeps running and it never hibernates.

I don't think that error is related to drive being encrypted or using bitlocker, just think that is a generic type error that that volume can not be read in general. While your bitlocker driver checked to see if it was encrypted.

Seems you have issues with that disk if you ask me... You ran checkdisk against that specific partition?

Does that guid for that volume match up with your system reserved partition? A quick way to list all volumes by guid is mountvol

example

C:\>mountvol
Creates, deletes, or lists a volume mount point.

MOUNTVOL [drive:]path VolumeName
MOUNTVOL [drive:]path /D
MOUNTVOL [drive:]path /L
MOUNTVOL [drive:]path /P
MOUNTVOL /R
MOUNTVOL /N
MOUNTVOL /E

	path		Specifies the existing NTFS directory where the mount
				point will reside.
	VolumeName  Specifies the volume name that is the target of the mount
				point.
	/D		  Removes the volume mount point from the specified directory.
	/L		  Lists the mounted volume name for the specified directory.
	/P		  Removes the volume mount point from the specified directory,
				dismounts the volume, and makes the volume not mountable.
				You can make the volume mountable again by creating a volume
				mount point.
	/R		  Removes volume mount point directories and registry settings
				for volumes that are no longer in the system.
	/N		  Disables automatic mounting of new volumes.
	/E		  Re-enables automatic mounting of new volumes.

Possible values for VolumeName along with current mount points are:

	\\?\Volume{2964090a-db60-11e0-ba2f-806e6f6e6963}\
		*** NO MOUNT POINTS ***

	\\?\Volume{594c943c-dbb1-11e0-a78d-180373b10dd3}\
		D:\

	\\?\Volume{2964090b-db60-11e0-ba2f-806e6f6e6963}\
		C:\

	\\?\Volume{2964091f-db60-11e0-ba2f-806e6f6e6963}\
		*** NO MOUNT POINTS ***

	\\?\Volume{29640920-db60-11e0-ba2f-806e6f6e6963}\
		*** NO MOUNT POINTS ***

	\\?\Volume{29640921-db60-11e0-ba2f-806e6f6e6963}\
		*** NO MOUNT POINTS ***

	\\?\Volume{29640922-db60-11e0-ba2f-806e6f6e6963}\
		*** NO MOUNT POINTS ***

	\\?\Volume{6cc911ca-db53-11e0-80fa-806e6f6e6963}\
		E:\

	\\?\Volume{6cc91246-db53-11e0-80fa-180373b10dd3}\
		I:\

Now that first one is my reserved volume - and I can real simple verify that with just opening it

post-14624-0-79922100-1356360838.png

If while system reserved partition is listed, not a drive letter can you open it with that volume guid listed? If not it might be some other mount point that is no longer even connected to your drive and could be a red herring in your quest for the cause of the problem.

I would run a chkdsk against that system reserved partition. This thread has been going on for a while - you did run a FULL drive test with the tools from your drive maker??

I don't believe you can run a check disk with say

C:\>chkdsk \\?\Volume{2964090a-db60-11e0-ba2f-806e6f6e6963}\

The specified volume name does not have a mount point or drive letter.

So give it a drive letter and then run chkdsk against that drive letter.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • (Topic to get the juices flowing this Sunday morning!...) Actually, the situation has almost nothing to do with "lack of skills", especially since assembly-line skills can be taught to anyone, including Americans, certainly. Rather, the inadequacy-to-impossibility of large-scale tech manufacturing in America today, and the reasons why America finds tech manufacturing completely onerous in the 21st century, has to do with politically driven laws amid a plethora of non-scientific, utterly politicized "science-fact" that is patently false, punitive business taxation at every turn, an array of judicial fines of unimaginable scope and complexity, and, last but not least, American unionization strictures that serve to actually slay job creation and hobble all such manufacturing endeavors in America before they can get off the ground. Globalism emerged, they tell us, as the needed answer to American hubris and an unholy American drive to excel. Unless one is buried under mounds of political propaganda, it's easy to see the absurdity of labeling the employees of SpaceX, for instance, as "unskilled labor"... Etc. ad infinitum. At one time in the recent past, American manufacturing prowess was the envy of the world in a wide variety of technical fields! The current federal and state government roadblocks against America becoming competitive globally in tech manufacturing are considerable, it's true, as anyone with a working brain knows. But remarkably, that is only half the story! The other half of the story is, of course, the corporations themselves... Chinese tech manufacturing is simply unassailable in terms of profits, because the Chinese government wants to see its tech manufacturing second-to-none globally so that no companies/nations can compete in terms of ROI, and China has completely succeeded in that goal. Let's tic-off a few things: *Chinese tariff policies are set according to what is considered best for Chinese business, Chinese employees, and the Chinese people. Huge difference with how things are done with tariffs in the US--as the US government (SCOTUS in this case, Congress in others) plainly feels that tariffs are "unfair" for the limited number of citizens who may pay them, whereas nothing is "unfair" when Congress considers the Personal Income Tax rates to be infinitely hike-able, along with infinitely enlarging annual budget deficits. *The Chinese government boldly subsidizes Chinese companies to artificially amplify their profits. *The Chinese government deliberately refuses to avidly demonize Chinese businesses and does not consider Chinese businesses "the enemy", so very unlike American (D)s these days. *Chinese labor laws and businesses are allowed to set their own labor policies according to what Chinese companies consider is best for companies and their employees... Simply put, American workers in tech manufacturing are not allowed to set their own labor policies! It is the height of hypocrisy for Americans to decry working conditions in China while simultaneously ensuring that American products are manufactured in China, not in the US, simply to maximize profits. There is nothing wrong with making a profit, of course, absolutely nothing. But there is plenty wrong with attempts to normalize hypocrisy of this kind! But rank hypocrisy and the (D) party in the US are longtime bedfellows... The current government in Washington is working overtime to see if it can toss out the horribly poor, failed economic policies of the past, while the (D)s still in Washington work very hard to bring back the stupidity whenever possible. With the right policies in place, America can be an infinitely competitive manufacturer.
    • eSound Music 3.0.0 by Razvan Serea eSound Music is a free music streaming app that gives you access to over 150 million tracks from all genres. It allows you to search and listen to your favorite songs, create personalized playlists, and explore trending music. With an intuitive interface and smart search, discovering new artists and hits is fast and easy. You can even stream music in the background while using other apps. One of eSound’s standout features is its offline mode, letting you download and listen without internet access. eSound is widely compatible, working seamlessly across Windows, macOS, Linux, iPhone, iPad, Android, HarmonyOS, Amazon Fire devices, CarPlay, Android Auto, and more. eSound Music key features: Over 150 million tracks available Smart search for songs, artists, albums, and playlists Personalized song recommendations Continuous playback with auto-generated playlists Offline mode with song and playlist downloads Daily-updated trending charts and top songs Sleep timer to auto-stop playback High-quality audio support Customizable playlists and favorites Support for Apple CarPlay and Android Auto Works on Windows, macOS, Linux, iOS, Android, HarmonyOS, Amazon Fire, and more Cross-device sync via account login Background playback while using other apps Download: eSound Music 64-bit | Portable | ~160.0 MB (Free, paid upgrade available) Download: ARM64 | 116.0 MB Links: eSound Music Website | Screenshot | Web Player | Other OSes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • All these CEOs got the biggest boners thinking about firing employees for AI. Turned out it was just a wet dream.
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      73
    5. 5
      FloatingFatMan
      65
  • Tell a friend

    Love Neowin? Tell a friend!