Cant install grub to raid10 /boot


Recommended Posts

okay so this is where i fell down before with grub, according to the wiki

http://en.gentoo-wiki.com/wiki/RAID/Software

Since the /boot partition is a RAID, grub cannot read it to get the bootloader. It can only access physical drives. Thus, you still use (hd0,0) in this step.
Run grub:
grub --no-floppy
You must see GRUB prompt:
grub>

If you are using a RAID 1 mirror disk system, you will want to install grub on all the disks in the system, so that when one disk fails, you are still able to boot. The find command above will list the disks, e.g.
grub> find /boot/grub/stage1
 (hd0,0)
 (hd1,0)
grub>

and this is what i get

grub> find /boot/grub/stage1

Error 15: File not found


also tried


grub> find /boot/grub/stage1
Error 12: Invalid device requested

grub> root (hd0,0)
 Filesystem type is ext2fs, partition type 0xfd

grub> setup (hd0)
 Checking if "/boot/grub/stage1" exists... no
 Checking if "/grub/stage1" exists... no

Error 15: File not found

ls /boot/grub
default     e2fs_stage1_5  ffs_stage1_5  iso9660_stage1_5  menu.lst        reiserfs_stage1_5  stage1  stage2_eltorito  vstafs_stage1_5
device.map  fat_stage1_5   grub.conf     jfs_stage1_5      minix_stage1_5  splash.xpm.gz      stage2  ufs2_stage1_5    xfs_stage1_5

should i just be pointing it to /dev/grub ?

edit: seems grub (legacy) has issues with raid10, should I try grub2 or break md0 and make it raid1?

Link to comment
https://www.neowin.net/forum/topic/1122594-cant-install-grub-to-raid10-boot/
Share on other sites

Good to know that you got it working. Would you mind posting a link to the Gentoo discussion though? It might help someone else who stumbles across this thread, and I'm a little curious.

PS: I'd also be interested to know why you chose GRUB Legacy over GRUB 2.

Havent got it working yet, decided to redo the whole thing, went with grub as that is what the wiki advised if you are using the old 0.90 superblock for autoraid, I could use grub2 shouldn't be that much in it, should just need to add dolvm and domdadm in grub file

http://forums.gentoo.org/viewtopic-t-943666.html

http://forums.gentoo.org/viewtopic-t-943156.html

Thanks for the links! That thread is very interesting (and informative). I've never done anything of the sort before.

I have great respect for the Gentoo developers, but I, along with many other Debian developers it seems, often philosophically disagree with them. For the most part this tends to stem from their reluctance to embrace new ways of doing things. (Take a look at the Gentoo systemd discussion.) They make Debian developers look liberal in that regard -- and that's really saying something! I suspect that's why they (or the Gentoo wiki) recommended GRUB Legacy over GRUB 2.

all sorted now, its encrypted, have added keys to the raid so i dont have to enter a passphrase, had to go with raid1 for /boot - just updating it and putting im a few things i require :) - as for grub and such, like with most things on gentoo it is there but masked, you can use it if you wish, and then use the forums for help should you require it, it will hit the stable branch in time :)

GRUB2 is better than GRUB original in the features it provides, other than that, GRUB legacy trumples GRUB2 in all aspects.

You can boot up to GRUB and boot anything from the command line, for GRUB2 you'd need a book to lookup and type all the rubbish it needs.

Also why would anyone switch from a reliable fully-proven system that's been in use mostly flawlessly for years to a newer system (systemd) that's lined with bugs, much slower, and doesn't actually have any enhancements?

GRUB2 is better than GRUB original in the features it provides, other than that, GRUB legacy trumples GRUB2 in all aspects.

You can boot up to GRUB and boot anything from the command line, for GRUB2 you'd need a book to lookup and type all the rubbish it needs.

Also why would anyone switch from a reliable fully-proven system that's been in use mostly flawlessly for years to a newer system (systemd) that's lined with bugs, much slower, and doesn't actually have any enhancements?

I completely disagree with you. However, I beg you, please don't start this discussion again. You can read a thorough discussion of all sides of this issue on debian-devel here and here. Its gotten nearly as bad as the Windows 8 love/hate threads. (I said nearly. Its not quite that bad yet!)

I completely disagree with you. However, I beg you, please don't start this discussion again. You can read a thorough discussion of all sides of this issue on debian-devel here and here. Its gotten nearly as bad as the Windows 8 love/hate threads. (I said nearly. Its not quite that bad yet!)

Interesting reads.

My point isn't that systemd isn't worth anything, it's that it's been released in a junk state. I switched gdm for xdm now, the first 2 boots it was fine, bit slow to open, but fine. Since then, on every boot, it doesn't load xdm up at all, if I login as root and start is using systemctl then it'll open. There's some other programs that haven't worked either and have needed their systemd files changing so they actually run. If I worked for a bank and replaced their whole system with something that sometimes didn't bother carrying out transactions - I'd be fired, instantly and sued for damages. Systemd is incomplete, if they had waited until it was stable and working with the majority of software, then it'd be worthwhile releasing.

OK, n_k; maybe we agree a little more than I previous thought. I apologize for judging you so quickly.

Honestly, based on what I have read about Arch's switch to systemd, your problems seem to be mostly related to the Arch developer's tendency to jump first. In some cases that's a good thing. Arch is known for having bleeding-edge packages, unlike slower-moving-but-more-stable distributions like Debian. If you take a look at the current status of systemd in Debian Wheezy/Sid, its in similar shape. However, unlike Arch, Debian is still shipping sysvinit as the default in Wheezy; systemd will likely make its appearance as default in Jesse.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft's fast coding model MAI-Code-1-Flash comes to Copilot Business and Enterprise by Karthik Mudaliar Microsoft’s recently announced MAI-Code-1-Flash model is now generally available to GitHub Copilot Business and Copilot Enterprise customers. With this support, organizations can have more centralized policy controls and billing while finally being able to use Microsoft’s lightweight, first-party coding model. According to GitHub’s announcement, Business and Enterprise plan administrators must enable the MAI-Code-1-Flash policy in Copilot settings before developers can access the model. Microsoft says that MAI-Code-1-Flash is for fast, iterative coding work rather than the most demanding architectural or debugging tasks. GitHub’s official model comparison page says that the model is great for "general-purpose coding and writing," while it excels at fast, accurate code completions and explanations Microsoft introduced MAI-Code-1-Flash on June 2 as part of a broader collection of internally developed MAI models. GitHub subsequently expanded support to Copilot CLI, the Copilot cloud agent, GitHub.com chat, GitHub Mobile, Visual Studio, JetBrains IDEs, Eclipse, and Xcode, but said support for managed Business and Enterprise customers was still on the way. In Microsoft’s own benchmark testing, MAI-Code-1-Flash scored 51.2% on SWE-Bench Pro, compared with 35.2% for Anthropic’s Claude Haiku 4.5. Microsoft also claimed that the model used up to 60% fewer tokens on SWE-Bench Verified. Do note that these are vendor-run results rather than independent measurements. The model is billed at provider list pricing under GitHub’s usage-based system. GitHub currently lists MAI-Code-1-Flash at $0.75 per million input tokens, $0.075 per million cached input tokens, and $4.50 per million output tokens. For organizations, the main incentive to use MAI-Code-1-Flash is likely to be efficiency rather than maximum capability. A smaller model that responds quickly and limits unnecessary output is quite useful for repetitive agent tasks at scale, especially after GitHub Copilot’s move toward usage-based billing. The "Flash" model is recommended for fast work and not necessarily for huge repositories with loads of context. It's better if teams compare their output with other larger models, especially if they're working on security-sensitive changes and complex, multi-file work.
    • yes AND no the "original" or plain/normal Optiplex 7010 won't be getting any more new firmware updates BUT the Optiplex SFF/SFF Plus {small form factor}, Micro/Micro Plus & Tower/Tower Plus 7010 editions DO get new updates such as this new one   and here are similar guides from the Dell web site for Dell systems: https://www.dell.com/support/kbdoc/en-us/000390990/secure-boot-transition-faq https://www.dell.com/support/kbdoc/en-us/000347876/microsoft-2011-secure-boot-certificate-expiration
    • AT&T has been spying on US citizens with the NSA for decades.. they just know how to keep it more under wraps.. the evil level is still there.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      459
    2. 2
      +Edouard
      212
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!