Recommended Posts

So I actually fired a Taurus Judge on camera for the first time today. I recorded a video of the experience for YouTube which is currently uploading, but I noticed something. I had a very hard time shooting it accurately. I felt like I had a good grip and put the bead right where I wanted it, but I found it difficult to tell exactly how my sights were lined up. I'd say it'll just take some getting used to because I picked up my pistol and put a round right in the bulls-eye.

Anybody here have a Judge? What do you think of it? Have you had similar issues shooting it accurately?

Link to comment
https://www.neowin.net/forum/topic/1123180-taurus-judge-first-impression/
Share on other sites

So here's the video of the Taurus Judge. I'm willing to blame myself for the poor performance because I've seen other people do well with a Judge, but for some reason I hit almost dead center with the first round out of my pistol, and couldn't really hit anything with the Judge. Anyway, here's the video:

Practice Practice Practice

What are you primarily going to use this firearm for, self-defense?

From the day I bought my Kimber 1911, I could put tight groupings on a target without a problem. Then I got my concealed carry license and didn't want to carry such a bulky gun all day. I then bought a Kahr PM9 which took quite a while to get accurate with. Such a light and small gun chambered in 9mm has quite a kick to it. But after quite a bit of practice at the range, I am now as accurate with it as I am with my 1911.

Long story short, you're new to this firearm, put some practice into it and you'll get accurate.

The Judge is not very accurate. It was developed to be a very close quarters weapon to be used by South American judges & prosecutors - very high risk professions down there.

The Judge is also rather stocky at 29 oz empty. OTOH, the Ruger LCR-357 (.357 Mag/38 Spl +P) polymer framed compact revolver runs about 17 oz. The standard .38 Spl only model is just 13.5 oz, and a .22 8-shot is coming.

  • 2 weeks later...

Last I heard the judge takes 410 shells as well right?

Yep, it can take either .45 LC or 410 shotgun shells. The model I used in this video has a 3" cylinder, so you can fire standard length or 3" magnum .410 shells. Just an FYI, do NOT use those "self defense" .410 shells with discs and stuff inside them. The barrel on a Judge is rifled, and I had a guy at a gun store tell me that he saw one blow apart when somebody tried to fire one of those non-standard .410 shells through it. Regular buckshot will travel just fine, but something about those discs and stuff in the self defense rounds caught on the rifling and caused an excess of pressure.

Another problem with The Judge stems from its ability to shoot shotgun shells; in at least one state (California) it's considered a sawed-off shotgun under state law and is thus illegal. Not so under Federal law though. Outstate owners of it, MIL Thunder 5, S&W Governor, T/C Contender (interchangeable barrel single shot, including shotshell calibers) and similarly chambered .45/.410 handguns beware of transporting them to or through there.

Another problem with The Judge stems from its ability to shoot shotgun shells; in at least one state (California) it's considered a sawed-off shotgun under state law and is thus illegal. Not so under Federal law though. Outstate owners of it, MIL Thunder 5, S&W Governor, T/C Contender (interchangeable barrel single shot, including shotshell calibers) and similarly chambered .45/.410 handguns beware of transporting them to or through there.

Yeah but that's because they're a communist country.

  • Like 2
This topic is now closed to further replies.
  • Posts

    • With the current hardware prices Microsoft should lift the restriction. Then if you have the correct TPM then allow you to use X feature, if you don't have the correct TPM then don't but still actually let you run windows. 11. With a disclaimer during install that X features would be unavailable.
    • It's good for recycling of course. But commence inflation of a second hand RAM bubble and price gouging on DDR 4 inventory in 3... 2... 1...
    • Bypassed Windows 11 shows surprising stability on ancient, completely unsupported hardware by Sayan Sen When Windows 11 was first released, one of the most complained-about issues with the new desktop Microsoft OS was its higher system requirements, which pushed many relatively modern and powerful processors and devices onto the officially unsupported list. Thankfully, they have not been updated again for the base OS, though systems require four times the memory and storage if they want to run AI-powered apps and features. As such, Windows 11 technically runs on 4GB of memory, and there is no imposed restriction on the generation of memory it supports. Speaking of memory, prices are extremely high nowadays for hardware, especially DDR5 and DDR4 kits due to the current silicon shortage, and there are also reports of it affecting DDR2 as well, and it might only be a matter of time before even DDR1 gets affected. Before that could happen, an enthusiast took an ancient DDR1-based system and decided to try out Windows 11 on it to see how well the modern OS would fare on such hardware. The system runs an outdated graphics card interface standard based on AGP, or Advanced Graphics Port, called AGP 3.0 or AGP8x. AGP was essentially succeeded by the modern PCI Express (PCIe) bus standard. The user behind the experiment is retro hardware enthusiast Omores, who built the system around an ASRock ConRoe865PE motherboard based on Intel's i865PE chipset from way back in 2003, around the time when AGP was still in fashion. What made this board special back in the day was its unusual support for newer Core 2 Duo and even Core 2 Quad processors while still retaining older DDR1 memory support and an AGP8X graphics slot, making it an ideal bridge or link between two vastly different generations. Powering the machine was Intel's Core 2 Quad Q6600 alongside 3GB of DDR1 RAM and an ATI Radeon HD 4650 AGP graphics card, one of the final and most capable GPUs released for the aging AGP interface. While installing Windows 11 itself was relatively easy by bypassing Microsoft's hardware checks, getting the graphics card fully functional proved to be some challenge. Microsoft had quietly dropped native AGP support after the earliest releases of Windows 10, meaning newer versions of Windows no longer include the necessary Graphics Address Remapping Table (GART) drivers required for proper AGP acceleration. Without them, AGP graphics cards typically boot up, though with limited functionality, and can often throw a Code 43 error in Device Manager. To work around the limitation, Omores extracted Intel's legacy AGP440 SYS driver from an early Windows 10 release and paired it with a modified INF file so Windows 11 would correctly recognize the chipset. Following this and combined with AMD's final 64-bit Catalyst AGP drivers from 2012, the Radeon HD 4650 was able to operate with full AGP 8X acceleration intact. The result was said to be surprisingly usable for hardware that is over two decades old. Hardware-accelerated H.264 video playback worked correctly and benefited apps like Firefox, while legacy applications and games ran without major graphical issues. The system also successfully completed the 3DMark 2001 benchmark, although performance naturally lagged behind what the same hardware achieves under Windows 7, which is significantly lighter than Windows 11. There was, however, one unavoidable limitation as Microsoft's Windows 11 version 24H2 introduces a mandatory SSE4.2 CPU instruction requirement that cannot be bypassed through installer modifications or registry tweaks. Since no AGP-era processor supports SSE4.2, Windows 11 version 23H2 effectively becomes the final release capable of running on such systems. Regardless, it is still a very cool feat and quite fascinating to see just how stable Windows 11 turned out to be on such unfamiliar hardware. Source: Omores (Patreon) via O_MORES (Reddit)
    • That will only really help other players that are also responsible for creating the problem.
    • Well, it's good to know that they have found a workaround to a problem that they helped create, I guess...
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      539
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!