Recommended Posts

So I am going to buy an engagement ring today. I narrowed it down to 3 rings. Looking for some feedback from you guys on them, preferably from our female members. Couldn't tell you what her tastes are, I always bought her stones in the past.

http://www.zales.com/product/index.jsp?productId=13148083

pZALE1-2745312t400.jpg

http://www.zales.com/product/index.jsp?productId=12268342

pZALE1-11577571t400.jpg

http://www.zales.com/product/index.jsp?productId=17579916

pZALE1-11088006t400.jpg

Link to comment
https://www.neowin.net/forum/topic/1123538-buying-a-ring-today/
Share on other sites

I like the last one..

I bought my rings from Zales.. NIGHTMARE experience. I have bought a lot from there and only had that one horrible experience . but when I researched them a lot of people had alot of the same issues I had with them..

GET THE PROTECTION plan. I did and very thankful that I did.. This was a painless experience.

If you can't get what she likes before you propose then maybe after you propose you can give her the choice to take it back and get something similar if she likes. You can also talk to her friends to get an idea if you can trust them being quite. Some woman like to wear the engagement ring with the wedding ring. If that is something your woman might like to do then keep that in mind when picking a ring.

Also, do not be afraid to try to push the price down. Jewelery has a high markup and they will go way down if you haggle them. You can get them to drop the price down even if there is a current discount. You can go from store to store to compare prices and rings and make sure the sales person knows that. That way they are more likely to try to get your business by giving you a percentage of the jewelry.

Usually they have an insurance you can buy that is a one time fee and will replace damaged or lost jewelry. The insurance usually requires an annual inspection which is a pain in the ass and over time you will forget to do. If you do not do the inspection it will void the insurance. So keep that in mind before buying the insurance. Some places will still do the inspection even though you missed it. As long as nothing is damaged or mission they will update the insurance and sign off the inspection.

i would by from a diamond broker not zales ... like blue nile .com

the markup is huge!!! do you know what diamond cut she likes does she have sisters or a really good friend to ask the cut style that she likes ... princess etc.... just saying .. the cuts matters the price also ring size you can use a ring she has already that she is not wearing .. just trying to help

I shopped around for one earlier this year, and there are two pieces of advice that I can give you.

Do not get a princess cut diamond. It is the easiest cut to do. Gemologists literally learn to cut diamonds with this cut. Princess cut diamons are generally the worst ones in terms of quality that you can get. That's why they gave it a name that would attraction more attention. In my opinion, go with a round-cut. It's THE classic cut for a diamond ring, and it will never go out of style. So go with that one, unless your significant other explicitly stated they wanted another cut. (And if they said they wanted a princess-cut, get them to change their mind)

Do not buy a diamond or buy from a jeweler that is not AGS certified. Otherwise, you could be (read: probably are) paying way more money for a diamond than what you should be. A diamond certified by the AGS will get an appraisal that is guaranteed, no matter where you go. A certified jeweler is basically a jeweler that stands behind all of their diamonds. The AGS can and does randomly visit these jewelers, select any number of diamonds on display, and appraises them. If a certified jeweler misrepresents any of their diamonds, the AGS will revoke that jeweler's certification. I would never buy from a jeweler that is not certified with the AGS. Zales, Hannoush, Jareds, Kays are not certified. In CT, the only close certified dealer is Michael's, and that is the only place I would buy one. But Michael's is a local jeweler. I don't know what is out there in IL.

As for the style to get, that is totally up to the person receiving it. If you don't know what they want, ask. Or, shop for the ring together. Trust me, you don't want to spend thousands of dollars on a ring that they hate or find unattractive.

I'd go with a pack of these:

ring_pops.jpg

Pros: Tasty

Get more for less

Edible

Chicks Dig Guys who pay for food

Bigger than any gem any of her friends have

Cons: Too many Pros, and not enough cons.

But.. if you don't agree, and want to spend more money.. then go with the third.

First of all, congrats :D

Secondly, I love the last one :D I prefer round to square cuts (but I notice a lot more women like the squares, so probably a good choice) and I'm a total sucker for the three-stone look like that. The first one's pretty too.

personally i prefer the last one.

However, I have being told many times of this rules:

1.Get it from a store in person so you can negotiate!!! 10% down is not much, sometimes you can have 40% down

2. Diamond cuts have grades! The fine cuts have higher prices. Unless you girlfirend is a specialist, get the the LARGEST diamond in your budget, with the ********* cut. Trust me, it is for her girlfirends to see, and none of them will carry a magnifying glass with them.

I have seen people buy locally a ring with a giant diamond and two tiny ones around it for the same price as you ring number 3. it looked WAAAAY more impressive! and it was not the best diamonds, but for inexperienced person it looked DAMN IMPRESSIVE! much more so then any of your examples.

good luck, depending on where you are in might be hard to find a deal... but never buy based on a grade! buy based on size!

personally i prefer the last one.

However, I have being told many times of this rules:

1.Get it from a store in person so you can negotiate!!! 10% down is not much, sometimes you can have 40% down

2. Diamond cuts have grades! The fine cuts have higher prices. Unless you girlfirend is a specialist, get the the LARGEST diamond in your budget, with the ********* cut. Trust me, it is for her girlfirends to see, and none of them will carry a magnifying glass with them.

I have seen people buy locally a ring with a giant diamond and two tiny ones around it for the same price as you ring number 3. it looked WAAAAY more impressive! and it was not the best diamonds, but for inexperienced person it looked DAMN IMPRESSIVE! much more so then any of your examples.

good luck, depending on where you are in might be hard to find a deal... but never buy based on a grade! buy based on size!

Just.. no.

imo i'd avoid chain jewerly stores like the plague. as others have mentioned, their mark-up is huge. plus, all the rings look kinda the same. of those 3, however, i like the 3rd one. everyone's tastes and priorities are different though!

in my case, last year my wife and i went ring shopping together. i didnt want to guess and pick something she wouldnt like. buying together, she now has a ring that we both love. in our case, i bought the diamond separately from Zoara, then we went to a local, family-owned store to pick out the setting. we had the setting custom-made by Gelin Abaci and the diamond set. we are very happy w/ our purchase.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft's fast coding model MAI-Code-1-Flash comes to Copilot Business and Enterprise by Karthik Mudaliar Microsoft’s recently announced MAI-Code-1-Flash model is now generally available to GitHub Copilot Business and Copilot Enterprise customers. With this support, organizations can have more centralized policy controls and billing while finally being able to use Microsoft’s lightweight, first-party coding model. According to GitHub’s announcement, Business and Enterprise plan administrators must enable the MAI-Code-1-Flash policy in Copilot settings before developers can access the model. Microsoft says that MAI-Code-1-Flash is for fast, iterative coding work rather than the most demanding architectural or debugging tasks. GitHub’s official model comparison page says that the model is great for "general-purpose coding and writing," while it excels at fast, accurate code completions and explanations Microsoft introduced MAI-Code-1-Flash on June 2 as part of a broader collection of internally developed MAI models. GitHub subsequently expanded support to Copilot CLI, the Copilot cloud agent, GitHub.com chat, GitHub Mobile, Visual Studio, JetBrains IDEs, Eclipse, and Xcode, but said support for managed Business and Enterprise customers was still on the way. In Microsoft’s own benchmark testing, MAI-Code-1-Flash scored 51.2% on SWE-Bench Pro, compared with 35.2% for Anthropic’s Claude Haiku 4.5. Microsoft also claimed that the model used up to 60% fewer tokens on SWE-Bench Verified. Do note that these are vendor-run results rather than independent measurements. The model is billed at provider list pricing under GitHub’s usage-based system. GitHub currently lists MAI-Code-1-Flash at $0.75 per million input tokens, $0.075 per million cached input tokens, and $4.50 per million output tokens. For organizations, the main incentive to use MAI-Code-1-Flash is likely to be efficiency rather than maximum capability. A smaller model that responds quickly and limits unnecessary output is quite useful for repetitive agent tasks at scale, especially after GitHub Copilot’s move toward usage-based billing. The "Flash" model is recommended for fast work and not necessarily for huge repositories with loads of context. It's better if teams compare their output with other larger models, especially if they're working on security-sensitive changes and complex, multi-file work.
    • yes AND no the "original" or plain/normal Optiplex 7010 won't be getting any more new firmware updates BUT the Optiplex SFF/SFF Plus {small form factor}, Micro/Micro Plus & Tower/Tower Plus 7010 editions DO get new updates such as this new one   and here are similar guides from the Dell web site for Dell systems: https://www.dell.com/support/kbdoc/en-us/000390990/secure-boot-transition-faq https://www.dell.com/support/kbdoc/en-us/000347876/microsoft-2011-secure-boot-certificate-expiration
    • AT&T has been spying on US citizens with the NSA for decades.. they just know how to keep it more under wraps.. the evil level is still there.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      462
    2. 2
      +Edouard
      213
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!