pondering over getting a 2nd 7970


Recommended Posts

Are you running the latest 12.11 Beta 8 drivers and latest CAP 2? You should be getting better FPS than that, I average about those speeds sometimes more with everything maxed out except for AA

I will never go CFX again, when it works its great, but that is a rare phenomenon, most things had better FPS with 1 card when I was running 2 x 6850s

Personally, investing in a better single card is the better option, but you shouldn't be having many issues with a 7970, new games and beta drivers are the problem here imo

If you were gaming at 2560x1600 then I'd recommend it but you'd be pretty much buying a second card for just Far Cry 3. You're better off dialling back anti-aliasing to 4x and then waiting for a patch or two and a driver update. I have a GTX680 SLI setup and can only run 2x AA at 2560x1600, plus I get framerate drops. At this point I'm inclined to think that performance will improve, given that the previous nVidia driver update increased performance by up to 38% - that suggests the drivers were very poorly optimised before and probably still are.

im running beta 11 drivers? remember i have AA on 8x too.

Beta 11, yea thats what I meant, we were stuck with Beta 8 for so long I forgot we had an update

Drop AA down halfway and your FPS should get a nice boost

Also check what you have AA set in CCC, I dropped mine to the lowest and just use in-game AA

farcry3_d3d11_2012_12_04_14_11_37_526.png

farcry3_d3d11_2012_12_04_15_38_33_655.png

hmmm, i have a decent enough cooler. is it best to manually OC, or use some asus sofware. any reccoemnedations ot tips? its been a while since i OC anything.

rest of my rig:

CPU - AMD FX-6 6100 Black Edition 6 Core 3.3Ghz Socket AM3+ 8MB L3

MOBO - ASUS Sabertooth 990FX Socket AM3+ 8 Channel Audio ATX

GPU - AMD HD 7970

RAM - 8GB DDR3 1600MHz

SSD- Corsair 120GB Force 3 SSD 2.5" SATA

OS - Win7 x64 Profesional

PSU - Corsair TX 850W V2 PSU

hmmm, i have a decent enough cooler. is it best to manually OC, or use some asus sofware. any reccoemnedations ot tips? its been a while since i OC anything.

rest of my rig:

CPU - AMD FX-6 6100 Black Edition 6 Core 3.3Ghz Socket AM3+ 8MB L3

MOBO - ASUS Sabertooth 990FX Socket AM3+ 8 Channel Audio ATX

GPU - AMD HD 7970

RAM - 8GB DDR3 1600MHz

SSD- Corsair 120GB Force 3 SSD 2.5" SATA

OS - Win7 x64 Profesional

PSU - Corsair TX 850W V2 PSU

I use the BIOS, easiest way is to bump up the Multiplier, it works in simple terms like this

FSB is 200MHz

Multiplier is x17

200x17 = 3.4GHz (That is my CPU config)

Bump the multiplier from x17 to x18 and you get another 200MHz = 3.6GHz or 3600MHz

Same if you up the FSB, 200>210 x 17 = 3570MHz

But increasing the FSB will also OC your RAM so best to stick with the multiplier unless you want to try OCing other things too

If you get a bluescreen or no boot, bump the CPU voltage up a tiny amount

My CPU from 3.4GHz to 4GHz = from 1.35v to 1.49v but always try to stabilize the OC with the least amount of voltage

  • Like 1

let us know how it goes - AMDs CPUs arent as powerful for gaming as Intels CPUs. That's a great processor, but i feel that it's still holding you back.

Get that CPU stable then check your fps. After that, just get another 7970 :shifty:

  • Like 1

well

let us know how it goes - AMDs CPUs arent as powerful for gaming as Intels CPUs. That's a great processor, but i feel that it's still holding you back.

Get that CPU stable then check your fps. After that, just get another 7970 :shifty:

I believe, if I can remember correctly, 6100, when overclocked to around 4.2 or 4.4 GHz was, then, able to match i3' performance

Do let us know anyway how it goes

I use the BIOS, easiest way is to bump up the Multiplier, it works in simple terms like this

FSB is 200MHz

Multiplier is x17

200x17 = 3.4GHz (That is my CPU config)

Bump the multiplier from x17 to x18 and you get another 200MHz = 3.6GHz or 3600MHz

Same if you up the FSB, 200>210 x 17 = 3570MHz

But increasing the FSB will also OC your RAM so best to stick with the multiplier unless you want to try OCing other things too

If you get a bluescreen or no boot, bump the CPU voltage up a tiny amount

My CPU from 3.4GHz to 4GHz = from 1.35v to 1.49v but always try to stabilize the OC with the least amount of voltage

well im currently at 4.11GHz and appears to be now stable after a couple of minor cranks of the voltage. i had only two freeze ups, mid game. no bsods. didnt take much additional voltage to get her stable either. May push her a little further tomorrow. added 0.4 onto my windows score too! think she will go further. but i'll be honest, cant say im noticing much if any increase in FPS in game!

well

well im currently at 4.11GHz and appears to be now stable after a couple of minor cranks of the voltage. i had only two freeze ups, mid game. no bsods. didnt take much additional voltage to get her stable either. May push her a little further tomorrow. added 0.4 onto my windows score too! think she will go further. but i'll be honest, cant say im noticing much if any increase in FPS in game!

Nice work :)

You will mainly see better FPS in games that are heavily CPU dependant and/or your CPU was, in the first place the bottleneck, nothing bad about gaining over 700MHz on your CPU for free though ;)

Prime95 is one of the favourites for CPU stability, personally I gage it on real life use, if I can use my machine 100% with no problems, then it is 100% stable for me, P95 will crash the most stable machines

But also, I have seen OC's pass hours of P95 only to crash during gaming so take it as you will :)

Nice work :)

You will mainly see better FPS in games that are heavily CPU dependant and/or your CPU was, in the first place the bottleneck, nothing bad about gaining over 700MHz on your CPU for free though ;)

Prime95 is one of the favourites for CPU stability, personally I gage it on real life use, if I can use my machine 100% with no problems, then it is 100% stable for me, P95 will crash the most stable machines

But also, I have seen OC's pass hours of P95 only to crash during gaming so take it as you will :)

Is there a better AMd CPU that would benefit me without swapping out my mobo? better of with a phenom II?

well im currently at 4.11GHz and appears to be now stable after a couple of minor cranks of the voltage. i had only two freeze ups, mid game. no bsods. didnt take much additional voltage to get her stable either. May push her a little further tomorrow. added 0.4 onto my windows score too! think she will go further. but i'll be honest, cant say im noticing much if any increase in FPS in game!

i read this Techspot article the other day. They compare the fps increase by overclocking the cpu in FC3. Check it out and take it for what it's worth.

http://www.techspot.com/review/615-far-cry-3-performance/page6.html

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hasleo Backup Suite Free 5.8.2.2 by Razvan Serea Hasleo Backup Suite Free is a free Windows backup and restore software, which embeds backup, restore and cloning features, it is designed for Windows operating system users and can be used on both Windows PCs and Servers. The backup and restore feature of Hasleo Backup Suite can help you back up and restore the Windows operating systems, disks, partitions and files (folders) to protect the security of your Windows operating system and personal data. The cloning feature of Hasleo Backup Suite can help you migrate Windows to another disk, or easily upgrade a disk to an SSD or a larger capacity disk. System Backup & Restore / Disk/Partition Backup & Restore Backup Windows operating system and boot-related partitions, including user settings, drivers and applications installed in these partitions, which ensures that you can quickly restore your Windows operating system once it crashes. Viruses, power failure, or other unknown reasons may cause data loss, so it is a good habit to regularly back up the drive that stores important files, you can at least recover lost files from the backup image files in the event of a disaster. System Clone / Disk Clone / Partition Clone Migrate the Windows operating system from one disk to another SSD or larger disk without reinstalling Windows, applications and drivers. Clone entire disk to another disk and ensure that the contents of the source disk and the destination disk are exactly the same. Clone a partition completely to the specified location on the current disk or another disk and ensure that the data will not be changed. File Backup & Restore Back up specified files(folders) instead of the entire drive to another location to protect your data, so you can quickly restore files(folders) from the backup image files when needed. Incremental/Differential/Full Backup Different backup modes are supported, you can flexibly choose data protection schemes, which can improve backup performance and save storage space while ensuring data security. Delta Restore Delta restore uses advanced delta detection technology to check the changed blocks on the destination drive and restore only the changed blocks, so it has a faster restore speed than the traditional full restore. Universal Restore This feature can help us restore the Windows operating system to computers with different hardware and ensure that Windows can work normally without any hardware compatibility issues. Hasleo Backup Suite 5.8.2.2 changelog: Improved creation of bootable media that supports the UEFI CA 2023 certificate Fixed an issue that caused system restore to fail Fixed an issue where file backup could not list drives under Windows ARM64 Fixed an issue that caused backup of MacOS files/folders shared via Samba to fail Fixed an issue that caused "Smart Backup" to not work properly Fixed other minor bugs Download: Hasleo Backup Suite 5.8.2.2 | 39.7 MB (Freeware) Links: Hasleo Backup Suite Website | Hasleo Backup Suite Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Shotcut 26.6.25 by Razvan Serea Shotcut is a free, open source, cross-platform video editor for Windows, Mac and Linux. Major features include support for a wide range of formats; no import required meaning native timeline editing; Blackmagic Design support for input and preview monitoring; and resolution support to 4k. Editing Features Trimming on source clip player or timeline with ripple option Append, insert, overwrite, lift, and ripple delete editing on the timeline 3-point editing Hide, mute, and lock track controls Multitrack timeline with thumbnails and waveforms Unlimited undo and redo for playlist edits including a history view Create, play, edit, save, load, encode, and stream MLT XML projects (with auto-save) Save and load trimmed clip as MLT XML file Load and play complex MLT XML file as a clip Drag-n-drop files from file manager Scrubbing and transport control Video Effects Video compositing across video tracks HTML5 (sans audio and video) as video source and filters 3-way (shadows, mids, highlights) color wheels for color correction and grading Eye dropper tool to pick neutral color for white balancing Deinterlacing Auto-rotate Fade in/out audio and fade video from and to black with easy-to-use fader controls on timeline Video wipe transitions: bar, barn door, box, clock (radial), diagonal, iris, matrix, and custom gradient image Track compositing/blending modes: Over, Add, Saturate, Multiply, Screen, Overlay, Darken, Dodge, Burn, Hard Light, Soft Light, Difference, Exclusion, HSL Hue, HSL Saturation, HSL Color, HSL Luminosity. Video Filters: Alpha Channel: Adjust, Alpha Channel: View, Blur, Brightness, Chroma Key: Advanced, Chroma Key: Simple, Contrast, Color Grading, Crop, Diffusion, Glow, Invert Colors, Key Spill: Advanced, Key Spill: Simple, Mirror, Old Film: Dust, Old Film: Grain, Old Film: Projector, Old Film: Scratches, Old Film: Technocolor, Opacity, Rotate, Rutt-Etra-Izer, Saturation, Sepia Tone, Sharpen, Size and Position, Stabilize, Text, Vignette, Wave, White Balance Speed effect for audio/video clips Hardware Support Blackmagic Design SDI and HDMI for input and preview monitoring Leap Motion for jog/shuttle control Webcam capture Audio capture to system audio card Capture (record) SDI, HDMI, webcam (V4L2), JACK audio, PulseAudio, IP stream, X11 screen, and Windows DirectShow devices Multi-core parallel image processing (when not using GPU and frame-dropping is disabled) DeckLink SDI keyer output OpenGL GPU-based image processing with 16-bit floating point linear per color component Shotcut 26.6.25 changelog highlights: Added basic support for OpenFX (OFX) video plugins. Added VST2 audio plugin support for third-party audio effects. Added Safe Mode to launch Shotcut without external plugins for easier crash recovery. Added an experimental plugin UI generator (--experimental) for supported filters and plugins. Added a new Noise Reduction audio filter powered by RNNoise. Added HDR export support. Added PQ HDR metadata options for HDR exports. Added the ability to view HDR previews in full-screen mode. Improved Vulkan display support on Linux. Fixed DeckLink and UltraStudio external monitor deadlocks. Fixed Opus audio export warnings related to frame_duration. Improved plugin discovery and compatibility for supported OpenFX and VST2 plugins. Expanded command-line options for testing experimental features. Improved overall application stability when using third-party plugins. Enhanced HDR editing and preview workflow. Included numerous bug fixes, performance optimizations, and general stability improvements throughout the application.[full release notes] Download: Shotcut 26.6.25 | Portable | ARM64 ~200.0 MB (Open Source) View: Shotcut Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I looked into a few echo devices to find they were riddled with adverts over time. No thanks ill stick to my homeassistant, smart plugs, smart bulbs and cameras that don't cost me a monthly fee and are cheaper to buy. No adverts also.
    • Brave Browser 1.91.180 is out.
    • Putin or Farage had nothing to do with me voting out. I did so because I got fed up of the E.U telling us what we could and could not do. Fed up with our country being run by a load of unelected Europrats. We never joined the E.U in the first place.
  • Recent Achievements

    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      229
    3. 3
      PsYcHoKiLLa
      163
    4. 4
      Steven P.
      77
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!