pondering over getting a 2nd 7970


Recommended Posts

Are you running the latest 12.11 Beta 8 drivers and latest CAP 2? You should be getting better FPS than that, I average about those speeds sometimes more with everything maxed out except for AA

I will never go CFX again, when it works its great, but that is a rare phenomenon, most things had better FPS with 1 card when I was running 2 x 6850s

Personally, investing in a better single card is the better option, but you shouldn't be having many issues with a 7970, new games and beta drivers are the problem here imo

If you were gaming at 2560x1600 then I'd recommend it but you'd be pretty much buying a second card for just Far Cry 3. You're better off dialling back anti-aliasing to 4x and then waiting for a patch or two and a driver update. I have a GTX680 SLI setup and can only run 2x AA at 2560x1600, plus I get framerate drops. At this point I'm inclined to think that performance will improve, given that the previous nVidia driver update increased performance by up to 38% - that suggests the drivers were very poorly optimised before and probably still are.

im running beta 11 drivers? remember i have AA on 8x too.

Beta 11, yea thats what I meant, we were stuck with Beta 8 for so long I forgot we had an update

Drop AA down halfway and your FPS should get a nice boost

Also check what you have AA set in CCC, I dropped mine to the lowest and just use in-game AA

farcry3_d3d11_2012_12_04_14_11_37_526.png

farcry3_d3d11_2012_12_04_15_38_33_655.png

hmmm, i have a decent enough cooler. is it best to manually OC, or use some asus sofware. any reccoemnedations ot tips? its been a while since i OC anything.

rest of my rig:

CPU - AMD FX-6 6100 Black Edition 6 Core 3.3Ghz Socket AM3+ 8MB L3

MOBO - ASUS Sabertooth 990FX Socket AM3+ 8 Channel Audio ATX

GPU - AMD HD 7970

RAM - 8GB DDR3 1600MHz

SSD- Corsair 120GB Force 3 SSD 2.5" SATA

OS - Win7 x64 Profesional

PSU - Corsair TX 850W V2 PSU

hmmm, i have a decent enough cooler. is it best to manually OC, or use some asus sofware. any reccoemnedations ot tips? its been a while since i OC anything.

rest of my rig:

CPU - AMD FX-6 6100 Black Edition 6 Core 3.3Ghz Socket AM3+ 8MB L3

MOBO - ASUS Sabertooth 990FX Socket AM3+ 8 Channel Audio ATX

GPU - AMD HD 7970

RAM - 8GB DDR3 1600MHz

SSD- Corsair 120GB Force 3 SSD 2.5" SATA

OS - Win7 x64 Profesional

PSU - Corsair TX 850W V2 PSU

I use the BIOS, easiest way is to bump up the Multiplier, it works in simple terms like this

FSB is 200MHz

Multiplier is x17

200x17 = 3.4GHz (That is my CPU config)

Bump the multiplier from x17 to x18 and you get another 200MHz = 3.6GHz or 3600MHz

Same if you up the FSB, 200>210 x 17 = 3570MHz

But increasing the FSB will also OC your RAM so best to stick with the multiplier unless you want to try OCing other things too

If you get a bluescreen or no boot, bump the CPU voltage up a tiny amount

My CPU from 3.4GHz to 4GHz = from 1.35v to 1.49v but always try to stabilize the OC with the least amount of voltage

  • Like 1

let us know how it goes - AMDs CPUs arent as powerful for gaming as Intels CPUs. That's a great processor, but i feel that it's still holding you back.

Get that CPU stable then check your fps. After that, just get another 7970 :shifty:

  • Like 1

well

let us know how it goes - AMDs CPUs arent as powerful for gaming as Intels CPUs. That's a great processor, but i feel that it's still holding you back.

Get that CPU stable then check your fps. After that, just get another 7970 :shifty:

I believe, if I can remember correctly, 6100, when overclocked to around 4.2 or 4.4 GHz was, then, able to match i3' performance

Do let us know anyway how it goes

I use the BIOS, easiest way is to bump up the Multiplier, it works in simple terms like this

FSB is 200MHz

Multiplier is x17

200x17 = 3.4GHz (That is my CPU config)

Bump the multiplier from x17 to x18 and you get another 200MHz = 3.6GHz or 3600MHz

Same if you up the FSB, 200>210 x 17 = 3570MHz

But increasing the FSB will also OC your RAM so best to stick with the multiplier unless you want to try OCing other things too

If you get a bluescreen or no boot, bump the CPU voltage up a tiny amount

My CPU from 3.4GHz to 4GHz = from 1.35v to 1.49v but always try to stabilize the OC with the least amount of voltage

well im currently at 4.11GHz and appears to be now stable after a couple of minor cranks of the voltage. i had only two freeze ups, mid game. no bsods. didnt take much additional voltage to get her stable either. May push her a little further tomorrow. added 0.4 onto my windows score too! think she will go further. but i'll be honest, cant say im noticing much if any increase in FPS in game!

well

well im currently at 4.11GHz and appears to be now stable after a couple of minor cranks of the voltage. i had only two freeze ups, mid game. no bsods. didnt take much additional voltage to get her stable either. May push her a little further tomorrow. added 0.4 onto my windows score too! think she will go further. but i'll be honest, cant say im noticing much if any increase in FPS in game!

Nice work :)

You will mainly see better FPS in games that are heavily CPU dependant and/or your CPU was, in the first place the bottleneck, nothing bad about gaining over 700MHz on your CPU for free though ;)

Prime95 is one of the favourites for CPU stability, personally I gage it on real life use, if I can use my machine 100% with no problems, then it is 100% stable for me, P95 will crash the most stable machines

But also, I have seen OC's pass hours of P95 only to crash during gaming so take it as you will :)

Nice work :)

You will mainly see better FPS in games that are heavily CPU dependant and/or your CPU was, in the first place the bottleneck, nothing bad about gaining over 700MHz on your CPU for free though ;)

Prime95 is one of the favourites for CPU stability, personally I gage it on real life use, if I can use my machine 100% with no problems, then it is 100% stable for me, P95 will crash the most stable machines

But also, I have seen OC's pass hours of P95 only to crash during gaming so take it as you will :)

Is there a better AMd CPU that would benefit me without swapping out my mobo? better of with a phenom II?

well im currently at 4.11GHz and appears to be now stable after a couple of minor cranks of the voltage. i had only two freeze ups, mid game. no bsods. didnt take much additional voltage to get her stable either. May push her a little further tomorrow. added 0.4 onto my windows score too! think she will go further. but i'll be honest, cant say im noticing much if any increase in FPS in game!

i read this Techspot article the other day. They compare the fps increase by overclocking the cpu in FC3. Check it out and take it for what it's worth.

http://www.techspot.com/review/615-far-cry-3-performance/page6.html

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ridiculous claim that the labor cost difference of $6000 annually would increase cost per phone by $200. The employees produce 3 phones per month or what?
    • Sparkle 2.20.1 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.1 changelog: You can now change the Animation Direction from Up, Left, or Off. Added configurable animation direction (Up, Left, Off) for improved accessibility Added TTL caching to the system info backend Refactored tweak application flow to await NvidiaProfileInspector Improved IPC listener cleanup to correctly remove specific listeners Fixed online status not updating after successful network requests Updated system info tests to support backend caching Removed electron-toolkit utils dependency in favor of internal is.dev helper Fixed unwanted files and folders being included in application bundles Download: Sparkle 2.20.1 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Never used the G7 Pro, but I've never had a good experience with that style of d-pad and fighting games.
    • And I just bought a seat cushion for my mesh chair. The chair feels nice but the first time I sat in it with boxers, I realized I don't like the feel of mesh on my legs. 😂
    • "This Dell 27 inch 4K 120Hz IPS monitor is really cheap after a very long time" ... Lol.
  • Recent Achievements

    • Dedicated
      Asgardi earned a badge
      Dedicated
    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      +Edouard
      247
    3. 3
      PsYcHoKiLLa
      153
    4. 4
      Steven P.
      84
    5. 5
      macoman
      64
  • Tell a friend

    Love Neowin? Tell a friend!