Recommended Posts

I just spent over a $100 in computer parts (an Intel DG41TY motherboard -- manual: http://downloadmirror.intel.com/17101/eng/DG41TY_ProductGuide01_English.pdf , a 450W power supply, 2 x 1GB of DDR2 RAM chips and a P$ CPU with 3GHz speed for socket 775).

I can't get the damn thing to post...I've connected both the main power supply connecter which covers all the pins and the 4-pin square connector.

I've also connected a 3-pin CPU cooling fan to the 4-pin connector on the motherboard ...(it looked ok to do because you can only put it on one way).

Looking at the documentation provided with the PDF listed above there were only two locations of the front panel for power which I've tried to test by tripping with a laptop screw driver with no success. I see one green solid light on the MB when I turn on the power for the power supply and that's it.

Please advise!

Thanks in advanced for any helpful response.

Link to comment
https://www.neowin.net/forum/topic/1125060-motherboard-not-posting/
Share on other sites

The light you see on the board, verifies that you have power connected.

Do you get any fans spinning, beeps, or anything?

Try reseating the CPU and RAM. If no dice, try resetting the BIOS by removing the watch battery for a few minutes, and reinsert.

What are your full specs?

Perhaps he shorted the wrong pins then. If the mobo is indicating it's getting power, then there's not much of a reason why shorting the correct pins together wouldn't power it on.

The only other thing it could be is cracked solder connections or something flawed on the pcb traces. Both of which are pretty difficult to fix.

Since these are really old components, I would have to assume they are used. Scammed by the seller perhaps?

could be a bum mobo. are you sure you hooked up all of the power?

It is very important to have "G" and "I" plugged in on the pic on page 11..."E" and "O" should also be plugged into a fan.

http://downloadmirror.intel.com/17101/eng/DG41TY_ProductGuide01_English.pdf

Also check "U" pins 1 and 2 should be jumped.

Are you absolutely sure your PSU works fine?

I only ask as my old EZcool psu blew up last year, and after a day of troubleshooting, it turned out that even though the green light was on, on my mobo, the psu was at fault

(an embarrassingly easy oversight, just a possibility)

I've found the pins that give it power but after reseating the memory and cpu and then the BIOS battery after about ten seconds...after

I short the pins the power supply fan turns and the cpu fan turns but the monitor I know works that's connected to the mb doesn't show a display and no POST beep.

Like I said connector I is a 4-pin...what I have connected is a 3-pin yet it powers the cpu fan to turn.

I'm getting an RMA# for this motherboard...in the mean time I need to get an alternative

system going for my customer...and need to know if this memory: PC2-3200/4200 DDR2 SDRAM DIMMs

is interchangable with a DDR2 RAM 800MHz PC2-6400 240-PIN DIM for a GX520 Optiplex

Desktop computer...please advise.

Buy a prebuilt. Much less headache. And you don't warranty it like you are now. How much time have you spent on this convert that to money by how much you charge and figure out how much money you lost so far.

Now you have to take it apart put it back together and you still need to load the os, drivers, and apps. I would say right now you are in the hole at least 100 and you haven't even started.

150 can get an old prebuilt. 300 gets you brand new.

I had this before and it was because I hadn't earthed the motherboard correctly (didnt put in all the screws)

so be sure its earthed/ remove it and reseat it.

I would say right now you are in the hole at least 100 and you haven't even started.

150 can get an old prebuilt. 300 gets you brand new.

Plus the $100 he already spent on parts. so thats $200 already :laugh:

(I'd still build it myself though)

That's why I'm going to RMA this back to them...and if don't respond they'll have to respond

to BBB...it didn't come with manual ...so it's possible I tried to start it with the wrong two pins

at first. Can somebody please answer question regard the memory???!

yes and you client is out of a computer for how long? Home built computers are good for yourself and maybe family members, anything outside of that buy a prebuilt dell, hp, lenovo, cyberpower, emachines, etc.... I will never ever build another computer for anyone outside of that esp if they live more than 10 minutes away....I am not dealing with that headache, they can call the manufacturer or I can call the manufacturer and have one of their techs come out to do whatever. I charge $150 an hour for my time, 2 hours and they spent what they would on a new computer prebuilt, all I need to do is some clean up which usually doesn't take more than 30 min.

As far as the memory goes, I believe that dell will only accept pc2 5300 and pc2 6400 and is maxed at 4GB.

http://www.crucial.c...20GX520&Cat=RAM

This topic is now closed to further replies.
  • Posts

    • Rufus alternative Ventoy now supports Windows 11's mandatory update, fixes major boot bug by Sayan Sen While Microsoft has its own official Media Creation Tool used for making bootable USB media, there are some popular third-party utilities as well which offer additional options like bypassing system requirements, Microsoft Account creation, and more. One of these is Ventoy, and the software has received its latest update today. In fact, the app actually got a slew of updates over the last couple of days, three version releases in total, to be specific. The first release, version 1.1.13, was pulled as there was some unspecified error in the update, and as such, the corrected version 1.1.14 was pushed out. Following that on very short notice, 1.1.15 was published as well. For those unfamiliar, Ventoy is an open-source utility that lets users create a bootable USB drive once and then simply copy ISO, WIM, IMG, VHD, or EFI files onto it without repeatedly formatting the drive. It supports both legacy BIOS and UEFI boot modes, Secure Boot, and a wide range of operating systems, making it one of the most versatile tools in the category. The biggest change in version 1.1.14 is an updated Secure Boot shim file aimed at resolving the UEFI CA 2023 issue, which is basically a compatibility problem that has affected Secure Boot environments on some systems. If you recall, we reported about severe boot issues on HP devices following the release of updated Secure Boot 2023 keys. For anyone who may not be aware, back in early 2024, Microsoft announced that it was updating Secure Boot keys as they were going to become 15 years old in 2026, which is also when they are set to expire. As such, the new 2023 certificates have been rolling out with the newest Windows 11 updates. Updated boot manager and Secure Boot certificates are crucial for protection against malware like bootkits. These are mandatory updates. Alongside that, the VentoyPlugson graphical plugin configurator was updated in sync with the release. The update also introduces a new VTOY_SECURE_BOOT_POLICY option within the Global Control plugin, giving users more flexibility in managing Secure Boot behavior. Ventoy has also received a fix for a startup issue when Secure Boot was disabled. Microsoft does officially allow users to boot systems without Secure Boot as long as the PC is Secure Boot capable. The full changelog is given below: Update secure boot shim file to solve the UEFI CA 2023 issue. The new release use a new CA, so you need to enroll the new key for the first boot time. VentoyPlugson update synchronously. Global control plugin add a VTOY_SECURE_BOOT_POLICY option. Fix the boot issue when Secure Boot is disabled in the UEFI firmware. You can download the latest version of the app here on Ventoy's official GitHub repo or from Neowin software stories.
    • Windows 11 is fine, no issues on any of the machines I've run it on since release. The stricter security requirements are a good thing, sometimes the baseline needs to change and people will winge, but it is what it is. Happened with the move from 9x to NT - broke compatability Happened with XP SP2 when security started to become a serious consideration Certainly happend with Vista that brought in UAC, the concept of not running as admin (something that has been the norm in Linux/Unix from pretty much the start) and a completely new driver stack. Windows 11 will probably get looked back at as the point where even consumer and SMB IT was dragged kicking and screaming into a somewhat secure by default configuration.
    • Bluestacks has been emulating Android on Windows for fifteen years. It's janky and riddled with ads though, so WSA looked like it was going to be a huge improvement over the emulator experience. Too bad Microsoft dropped the ball on that.
    • Classic. China would be nothing without Western, Japanese, and South Korean technology.
    • The world is larger then your small viewpoint. Plenty of scientists care about this, especially those involved in space.
  • Recent Achievements

    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      134
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!