HP LAPTOP randomly shutting down


Recommended Posts

hello i have just got a new hard drive for my hp laptop since the old one was broken but the problem now is that it randomly shuts down.

i have re installed the windows 7 system. also i have read the answers on yahoo that people gave. my fan inst broken i have opened it up completely and cleaned it.

also my laptop doesn't get really hot im sure about that because it gets hot as it always used to. iam worried about the RAM but im not sure im seeking advice from a

people that knows what it maybe. thanks.

Link to comment
https://www.neowin.net/forum/topic/1125390-hp-laptop-randomly-shutting-down/
Share on other sites

Is the laptop getting really hot? I have a friend of mine with an HP laptop and it has some serious cooling issues.

I second this. HP has some serious issues when it comes to cooling down laptops. Mostly check the fan under the laptop on the left side, mine just stopped whenever it thought it doesn't need more air and restart it was.

to really confirm heat or memory you will need to run tools.

I personally like speedfan for temp monitoring although cpuid has a really nice one called hwmonitor

I like memtest86+ for memory. You are best off letting it run for a while (a few hours). any of the blocks become red during that time you have a memory issue, it may not show up on the first pass or the 10th pass.

I am the (not very proud) owner of an dead HDX X16T-1200, and it worked fine for about a 18 months, although it would ALWAYS run hot. After about 18 months, the thing would get hot enough to cook an egg on, and that is not an exaggeration, and it just shut itself down one day. A few hours later I was able to power it up. Few days later, it shut down again. Couple days later i was able to power it up again, it worked for about a day, and then it died again. Repeat that process of it shutting down on its own and refusing to start for a good 4-8 weeks, but the time it would stay on got less and less. It eventually would only stay on for about 10 minutes, so I gave up on it.

I opened it up, looked at everything, and it all looked as it should. Fans were not terribly dusty, etc. I think they just use crap components.

So, I hate to say this as I know you are looking for answers, I just think they are crap laptops. I purchased mine as I was considering a MacBook at the time, but the HP laptop was over 60% less expensive once I found coupons online than the MacBook I was looking at at the time. But, I guess it is a matter of you get what you pay for.

I still have it in my basement. I am pretty sure if I went and grabbed it, it would power up again, but would probably only last a few days tops before it just decided to stop working.

Well

I am the (not very proud) owner of an dead HDX X16T-1200, and it worked fine for about a 18 months, although it would ALWAYS run hot. After about 18 months, the thing would get hot enough to cook an egg on, and that is not an exaggeration, and it just shut itself down one day. A few hours later I was able to power it up. Few days later, it shut down again. Couple days later i was able to power it up again, it worked for about a day, and then it died again. Repeat that process of it shutting down on its own and refusing to start for a good 4-8 weeks, but the time it would stay on got less and less. It eventually would only stay on for about 10 minutes, so I gave up on it.

I opened it up, looked at everything, and it all looked as it should. Fans were not terribly dusty, etc. I think they just use crap components.

So, I hate to say this as I know you are looking for answers, I just think they are crap laptops. I purchased mine as I was considering a MacBook at the time, but the HP laptop was over 60% less expensive once I found coupons online than the MacBook I was looking at at the time. But, I guess it is a matter of you get what you pay for.

I still have it in my basement. I am pretty sure if I went and grabbed it, it would power up again, but would probably only last a few days tops before it just decided to stop working.

Maybe for these laptops an SSD would be a good choice. Maybe the drive was contributing to the heat.

Well

Maybe for these laptops an SSD would be a good choice. Maybe the drive was contributing to the heat.

Yeah, I have definitely pondered it, and may pick one up in the future if needed, but since I have purchased it, I got a new job who was gracious enough to purchase me a MacBook Pro (two actually, I now have a MBP Retina), that I can also use for personal use, so I just kind of put the HP laptop away for a rainy day. I was actually thinking I may play around with it over Xmas break to see what if anything I can get working again.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This looks awesome, I will request access via Steam later this afternoon!
    • Personally, I’ve found that it’s usually worth investing in the infrastructure you don’t want to replace later, especially cabling. Running Cat6A (or better, depending on your needs) during an upgrade is relatively inexpensive compared to having to re-cable a few years down the road. For switches I try to balance current specs with realistic growth. If my budget allows it Ill choose switches with higher uplink speeds which leaves room for expanding later on, but I don’t necessarily overspend on access ports if the endpoints won’t benefit from them anytime soon. One lesson I’ve learned is that planning for scalability pays off. It’s much easier to add devices, VLANs, or higher-bandwidth workloads when your network infrastructure already supports it than to replace hardware later.  What is your budget like?
    • I hate the term, "future-proof." We saw it back in the 90's / 2000's, if not before. You cannot future-proof anything, since there is no definition of how far into the future you plan on prepping for. Best idea is to tell us what you currently have and what its use is at the moment, and we can then offer ideas about some areas that might need an upgrade and other areas that can be left alone.
    • I can agree that it is being used in a small capacity. I worked for a company where their engineers still used XP, and when asked why it was because their sensor software wasn't compatible with newer operating systems and the software was discontinued so they couldn't upgrade the software. Given that the sensors were still in use by companies, they had to continue using XP to support the sensor, otherwise the price to the company would have gone into the millions or billions. Our response was simple: Ok, you can keep the XP machine. But we're removing it from the network. "But then it can't access the Internet or folder shares!" Yup, kinda the point. If someone wants to continue using an unsecure OS they can do, I have no problem with that. But it should be isolated. Simple. I had a fight with a guy in the engineering department for weeks before he finally relented. But we digress.   What do I plan on doing to commemorate the anniversary? Nothing. I have fond memories of the OS, but at the end of the day it's just an OS. If I had some time I might see if I could install it on my Raspberry Pi for a laugh. But my reflex memory with today's OS ideas would probably get me frustrated and I'd uninstall it after 5 mins.
    • Shutter Encoder 20.2 by Razvan Serea Shutter Encoder is one of the best video converter software and image, audio available today. It has been designed by video editors in order to be as accessible and efficient as possible. It is one of the few free professional tools. Based on FFmpeg, it has the largest codec library available. You can thus convert your files into many different formats. Complete settings for the most advanced Shutter Encoder has a panel containing a large number of settings, in order to define your own choices based on your files and perfect your video or audio output. Well-thought-out settings, with parameters predefined to create files quickly and easily. List of functions Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Extract, Subtitling, Video inserts Sound conversions: WAV, AIFF, FLAC, MP3, AAC, AC3, OPUS, OGG Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, GoPro CineForm, Uncompressed YUV Output codecs: H.264, H.265, VP9, AV1, OGV Broadcast codecs XDCAM HD422, AVC-Intra 100, XAVC, HAP....and much more. Shutter Encoder 20.2 changelog: Added "Intel Quick Sync" hardware acceleration for Linux Added 'Identify speakers' option for "Audio transcription" function Improved installer package Improved video player performance Improved timecode display with drop-frame videos Improved naming convention for surround audio files Fixed splash screen freeze Fixed bug with file hanging Fixed bugs with presets loading Fixed bugs with video player's buffer Fixed bug with 'Total length of file' option Fixed bugs with 'Record screen/device' option Fixed bug with "XAVC" & "XAVC Long GOP" functions Rollback to XPDF tool for PDF conversion Removed unused binary architecture for Mac Various corrections Various improvements Download: Shutter Encoder 20.2 | 166.0 MB (Open Source) Download: Shutter Encoder Portable | 185.0 MB Links: Shutter Encoder Home Page | FAQ / Tips | macOS | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!